North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LT1/TPI/TBI (http://www.northeastf-bodyassn.com/forumdisplay.php?f=36)
-   -   Tranny slip and leak.... (http://www.northeastf-bodyassn.com/showthread.php?t=5047)

ZFreie 07-20-2013 12:33 PM

Quote:

Originally Posted by 84ta406 (Post 81862)
http://siracing.com/gregoire/

If you want the trans rebuilt right give them a Call. Not sure why everyone says no one local is good..?

Not a single l460e is talked about on his page, just th400s and powerglides....

84ta406 07-20-2013 12:51 PM

More popular, who really races with a 4l60? lol

he did my 700r4 back in the day and Ive seen pretty much any kind of trans come out of there. Call em before you jump to conclusions.

Z28 10-10-2013 01:00 PM

So this guy is parting out a 94 Z28, hes an honest sellet ive bought a bunch of things off him before. Thinking about putting this trans in and rebuilding mine. Thoughts?

84ta406 10-10-2013 01:09 PM

Do it up! Rebuilds really arent that hard. Hardest part IMO is getting the springs behind the clutches to compress so you can get the snap ring out.

KLAB 02-18-2014 08:33 PM

I'd like to do a nice rebuild on mine as well to handle more power. Throw a T56 in during the rebuild to see how it is.

Z28 02-18-2014 10:33 PM

Quote:

Originally Posted by KLAB (Post 85449)
I'd like to do a nice rebuild on mine as well to handle more power. Throw a T56 in during the rebuild to see how it is.

Come help me put a shift kit in mine and ill talk you out of a t56 swap

ls6monte 02-19-2014 12:36 AM

Quote:

Originally Posted by Z28 (Post 85453)
Come help me put a shift kit in mine and ill talk you out of a t56 swap

Fuck that! I'm done with automatics!

KLAB 02-19-2014 02:05 AM

Hahaha its not bad. You have my number just give me a call if you get stuck.

84ta406 02-19-2014 02:12 AM

3 speed or nothing! haha

Z28 02-19-2014 03:25 AM

So it looks like if the weather holds up ill be pulling the junker trans out. I need to make new lines and retrofit my cooler. Still unsure of what lines to use, probably just going to use stuff from NAPA. I just need to prep the newer transmission to go in after (shift kit, disassembly). I also want to setup a trans temp and pressure gauge so i dont blow this one too lol. Any knowledge on how ti do this?


All times are GMT. The time now is 03:48 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.