Any particular thread...
 

Hey Guys,
I know there is a million threads about fuel pump access panel, just wondering if there was any that seemed to be more helpful or not so helpful. I will be doing my fuel pump this week on my camaro.

http://ls1tech.com/forums/lt1-lt4-mo...-mod-pics.html

There ya go

One of dozens with a "ls1tech trap door mod" search lol

thanks i have read this 1.... just didnt know if there was 1 that someone actually used and they found it to be better than other 1s../

Ohhhh my bad lol. I've read a few and they are all pretty much the same, cut a hole, don't hit the gas tank lol

jayws6 did it with his car. came out pretty good

dont on the 1998. you have a 98 right? i forget!! haha Anyway if it is you have to cut a square with a rectangle attached to it and it makes this Monster hole!!!! ill see if i can search some photos. Either way Unless your running a high horse FI setup and might need to get in there more often id say do it. but your not. just drop the tank. its really not that hard.

Just drop it out the bottom you have no muffler so all you need to do is unbolt the shocks and let the rear hang down

^^ Dont forget the upper and lower panhard bar.

And the gas filler hose but all that shit rotted away on Josh :p

hahaha NICE!!!

i do have a 98... and i will look into the dropping of the tank... thanks gents... o it is a 98

Yeah we got it. Its a 98!!!!:badger:

What year is the car? :p

Personally I would do the trapdoor but if your exhaust is dumped and you don't have to fight with stuck pipes than it might be worth dropping the rear.

yeah you cut a 6 foot hole out of your floor and some how find a way to stick it back in and tell me its an awesome idea.......

http://ls1tech.com/forums/fueling-in...-98-fbody.html

Picture half way down black car

From that same page. you have to cut further over on the 98 as the hard steel lines run down the tank and over a good foot. this is why i just dropped the tank.

LOL You mean 6 inch? If you look in that thread one person made a nice clean cover for the hole out of sheet metal, I would say that's the way to go. Also keep in mind lots of people don't have access to a lift or good facilities to work on the car. Many cars have these from the factory for a reason.

yeah and it can be dropped in a few hours and back up on your back with a walmart jack and stands. Thats all im saying. the 98 is a bitch. and unless turbo or supercharged or a heavy shot of nitrous where a BIG setup in the tank is being changed out or fixed frequently id drop it. Thats just what im saying.

I did mine the first time dropping the tank and the hardest part was getting the exhaust off.

dont bend the filler neck on the way out. sucks to get it back in lol. literally the hardest part I wanna smack everyone that told me to cut a hold in my floor because I almost did