North East F-Body Association

Page 1 of 2

Show 40 post(s) from this thread on one page

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)

- V6 Engines (http://www.northeastf-bodyassn.com/forumdisplay.php?f=38)

- - Turn One PS pump (http://www.northeastf-bodyassn.com/showthread.php?t=219)

SpeedingFirebird

11-03-2009 04:40 PM

Turn One PS pump

Turn one lists the following:

LS1 40 Series pump
LT1 40 Series pump
Aluminum 40 Series pump
Aluminum 40 Series pump w/ integral reservoir.

Anyone know which fits the 3.4?

DemonWithin99

11-03-2009 04:45 PM

LT1 should, most LT1 accessories fit the 3.4l the although not all of them will. I know the PS pump does (had to replace mine with one) actually same part number.

c4boom

11-03-2009 04:54 PM

call them up and get one of there pulleys while your at it. they keep cosmetic blems so they may have one in stock cheap that you can polish

SpeedingFirebird

11-03-2009 05:38 PM

Quote:

Originally Posted by DemonWithin99 (Post 3642)

LT1 should, most LT1 accessories fit the 3.4l the although not all of them will. I know the PS pump does (had to replace mine with one) actually same part number.

Awesome, thanks! How much was the pump? They don't list prices.

Quote:

Originally Posted by c4boom (Post 3645)

call them up and get one of there pulleys while your at it. they keep cosmetic blems so they may have one in stock cheap that you can polish

What's the benefit of their pulley?

DemonWithin99

11-03-2009 09:35 PM

don't remember the $$ but the pulley will free up resistance that most pulleys add to the motor essentially allowing the motor to turn better

c4boom

11-03-2009 11:18 PM

that and the stock one tends to blow up if you pull it a few times due to mico cracks in the pully

ILuvPizzaTimes10

11-04-2009 12:20 AM

Yeah boom boom is correct those stock pulleys arent too healthy after they spin to 6500+ rpm for a while.

SpeedingFirebird

11-04-2009 12:21 AM

Quote:

Originally Posted by DemonWithin99 (Post 3651)

don't remember the $$ but the pulley will free up resistance that most pulleys add to the motor essentially allowing the motor to turn better

I am already running Jet underdrive pulleys. I am not sure if that included a PS pulley or not. I installed those ages ago.

c4boom

11-04-2009 01:00 AM

take a look if the one on there looks like it is made of plastic its a stocker

SpeedingFirebird

11-19-2009 06:23 PM

Quote:

Originally Posted by DemonWithin99 (Post 3642)

LT1 should, most LT1 accessories fit the 3.4l the although not all of them will. I know the PS pump does (had to replace mine with one) actually same part number.

They do not carry the LT1 pump any more. :ahhhhhhh:

He does carry a pump for the 3.8. Anyone know if the 3.8 and 3.4 have the same part numbers?

All times are GMT. The time now is 06:18 PM.

Page 1 of 2

Show 40 post(s) from this thread on one page