North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LSX Powertrain (http://www.northeastf-bodyassn.com/forumdisplay.php?f=37)
-   -   Need help diagnosing a valvetrain noise?? (http://www.northeastf-bodyassn.com/showthread.php?t=723)

smokinss 03-05-2010 07:07 PM

Need help diagnosing a valvetrain noise??
 
Well not too sure but I think ive got a bad lifter. If not then a rod knock or something. It does vary with rpm. See the video below. Dont mind the squeeking belt, lol

http://www.youtube.com/watch?v=x-B4f3251PA

My84Z 03-05-2010 11:09 PM

if I had to guess I would say a rocker shit itself and which is common on these cars and has happen to me but not that bad. other then that it maybe in the lower end I would pull the valve covers and check the rockers for damage mine spilt the needle bearings into the pan that is how I found mine.

Batman 03-05-2010 11:11 PM

rocker, i wouldn't start it until you find out if the needle bearing is still there

ILuvPizzaTimes10 03-05-2010 11:13 PM

I Concur.

smokinss 03-05-2010 11:39 PM

Well looks like thats what I will do. And how will I know if the needle bearing is there? I have never had the valve covers off myself. I think the last time they were off was when Don did the cam...

My84Z 03-06-2010 12:10 AM

look at them... they are easy and just touque down very simple unlike all the other gen motors. I believe they are 21ft lbs. I think they are like 15 bucks a piece at the dealer for a rocker. remember to look at both sides of them not just the side you can see easily.

smokinss 03-06-2010 12:22 AM

Update. I just pulled the valve cover off. The rockers seem to be fine and secured properly. I am thinking its a lifter thats collapsed.

The car starts fine and doesnt seem to have lossed any power or anything like that. I dont know though...

ILuvPizzaTimes10 03-06-2010 12:25 AM

if it were me. id pull everyone off. each lifter and inspect them. your gunna have to if you do lifters either way. HOPE its not lifters!!!! take em. if there good there simple to reinstall. there just a bolt down. no adjustments just torque em right

smokinss 03-06-2010 10:46 PM

UPDATE!!! Started pulling off the intake and getting the heads ready to come off today. I pulled off the mid pipe and a decent amount of water/coolant came out. NOT GOOD!! Looks like I blew a head gasket. Tomarrow I am going to drain the oil and use a magnet to see if Ive got metal shavings in the oil. Its not looking to good though. Time for a new shortblock and a new set of heads. Looks like the car will be down most of the summer or till god knows when.

c4boom 03-07-2010 02:47 AM

that blows TALK TO NICK HE HAS A 6.0 i think


All times are GMT. The time now is 01:18 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.