did you get ALLLLL 8 bolts out? there is one up top that is very hard to see let alone get out on your back, and there are 2 steel dowels that align the tranny to the bell housing. they tend to get FROZEN in there. facing the y pipe on the drivers side there is a small indent in the tranny case good enough size for a 1/2 flat head screwdriver to fit. tap it into that opening with a small hammer. and then on the other side there is a similar in a slightly downward angle. use a pry bar on that side. AS LONG AS ALL THE BOLTS ARE OUT! you wont crack or damage the bell housing with moderate force prying it apart.
__________________
1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore. 
BAAAAAA!!!!!!
|