Quote:
Originally Posted by jeff68
I contacted Eastwood Tech Help and found that Rust Encapsulator is supposed to be fine over bare metal as a primer. They told me to ensure that the surface was scuffed with 180-220 grit paper and properly cleaned. I used it as a bare metal primer on the firewall and radiator support of my Land Rover. I sandblasted the parts, then gave then a quick once-over with 220 grit before cleaning and spraying on the Encapsulator. After dry, it was top coated with either military CARC-substitute enamel paint or Rust-Oleum semi-gloss black enamel. So far, so good.
|
Thanks Jeff. This is good to know. I have 4 or 5 cans here.