7. Loosen rocker arms and pull out pushrods (8 on each side)
8. Remove lifters
**note** Lifters in picture are roller lifters.
9. Undo head bolts, they will be very tough to undo. Theres 8 lower ones and 9 upper bolts on each side. Undo the lower ones 1st and keep in order and then undo the upper ones keeping them in order as well.
10. Next take off the harmonic balancer. Use a balancer puller and not a mallet or anything as bearings can be damaged.
11. Remove the 10 bolts for the timing cover and set aside.
12. Remove timing chain/gears. There should only be a timing chain since gears are only available aftermarket.
13. Gently slide the cam out. This may be very time consuming as you want to do it slowly and carefully so you dont damage the cam bearings.