#1
|
||||
|
||||
Front-End Makeover Done!
It took almost forever, but I'm pretty much done with the front end of this car for 2017 at least from a mechanical point of view. Installed the following:
Wilwood Master Cylinder Wilwood proportioning valve Wilwood calipers CPP slotted rotors New bearings '96 JGC Quick Steering Box Helix upper and lower control arms Tuff Stuff 8" dual booster ProForged tall upper ball joints ProForged lower ball joints ProForged tie rod ends and sleeves Hooker Competition headers Car sat too low with Hotchkis 2" drop springs, and tubular arms, so we used 3/4" Global West coil spacers to get it back to where I wanted it. I had hoped it would've all gone together quickly, but I got the wrong parts a couple of times and the global west spacers wound up giving me back an inch and a half in height. Car finally came off the lift last Friday. Got to go get her aligned this week with specs from Dave Pozzi. Even though it's just a "redneck" alignment, the addition of the JGC steering box is incredible when compared with the original crap Chevy stuck in this car. Nice and firm, quick, lotsa feedback... a stiffer sway bar will help even more. |
#2
|
||||
|
||||
Nice! You definitely got a lot done.
__________________
68 Camaro (?350 SB) 69 Camaro (L72 427 BB) 69 Camaro (DZ 302 SB - www.z28.net) Camaro - A friendly flying car – from the French - the first half "camarade/friend" and the last half “aero/of the air". |
#3
|
||||
|
||||
Must be a blast to drive compared to where it was before the mods.
__________________
95 Z28 A4~Sold~ Quote:
|
#4
|
||||
|
||||
Thanks... my only gripe is how long it took to get all the right parts. I thought I had everything, but got sent wrong stuff twice, and I wasn't going to do the lower control arms just the top... then I figured while it was all apart why not do it now.
LOL, I'm still messing with the proportioning valve to get it as best I can. Friggin rain is killing me. Plus I have to get an appointment to align it. But just from the steering point of view, it's Night and Day. |
Thread Tools | |
Display Modes | |
|
|