Go Back   North East F-Body Association > GM (Non-F-Body) Garage > 1990's (GM)

Reply
 
Thread Tools Display Modes
  #31  
Old 09-27-2015, 12:54 AM
DavidS's Avatar
DavidS DavidS is offline
Missing a 67
 
Join Date: Jun 2010
Location: Granby, CT
Posts: 2,431
Post Thanks / Like
Thanks (Given): 370
Thanks (Received): 75
Likes (Given): 481
Likes (Received): 266
Dislikes (Given): 1
Dislikes (Received): 6
Default

spark plugs, dist cap, rotor, injectors, and plug wires are in and no misfires and no stumbling at low rpms.

I took the bed off today and have to replace the fuel sending unit and figure out what the heck to do with the rusty frame.

I'm not looking for pretty, just something to stop the cancer known as rust. I have read so much crap on POR...pros and cons...that I'm not sure what to do.

I just want something fairly easy that will stop the rust. If anybody has any suggestions....I'm listening.

taking the bed off


a forklift really helps...lol.


i hate rust...go with por15?
__________________

68 Camaro (?350 SB)
69 Camaro (L72 427 BB)
69 Camaro (DZ 302 SB - www.z28.net)
Camaro - A friendly flying car – from the French - the first half "camarade/friend" and the last half “aero/of the air".
Reply With Quote
  #32  
Old 09-27-2015, 02:15 AM
My84Z's Avatar
My84Z My84Z is offline
Post Whore
 
Join Date: Oct 2009
Location: dartmouth
Posts: 2,925
Post Thanks / Like
Thanks (Given): 4
Thanks (Received): 57
Likes (Given): 7
Likes (Received): 240
Dislikes (Given): 6
Dislikes (Received): 24
Default

I like por but since it is a plow truck i would get the brush on bed liner shit and do the metal with that nothing will get theough thar shit lol
__________________

2000 SS Procharger
98 Z vert turbo
07 TB SS cai catback and tune
Reply With Quote
  #33  
Old 09-27-2015, 10:32 AM
DavidS's Avatar
DavidS DavidS is offline
Missing a 67
 
Join Date: Jun 2010
Location: Granby, CT
Posts: 2,431
Post Thanks / Like
Thanks (Given): 370
Thanks (Received): 75
Likes (Given): 481
Likes (Received): 266
Dislikes (Given): 1
Dislikes (Received): 6
Default

Quote:
Originally Posted by My84Z View Post
I like por but since it is a plow truck i would get the brush on bed liner shit and do the metal with that nothing will get theough thar shit lol
Good idea!!! I'll wire wheel the heavy stuff off, then rust reformer, then bed liner.

Rust reformer
http://www.amazon.com/Rust-Oleum-783...=Rust+Reformer


bed liner:
http://www.amazon.com/gp/product/B00...k_ql_qh_dp_hza
__________________

68 Camaro (?350 SB)
69 Camaro (L72 427 BB)
69 Camaro (DZ 302 SB - www.z28.net)
Camaro - A friendly flying car – from the French - the first half "camarade/friend" and the last half “aero/of the air".
Reply With Quote
  #34  
Old 09-27-2015, 03:29 PM
DavidS's Avatar
DavidS DavidS is offline
Missing a 67
 
Join Date: Jun 2010
Location: Granby, CT
Posts: 2,431
Post Thanks / Like
Thanks (Given): 370
Thanks (Received): 75
Likes (Given): 481
Likes (Received): 266
Dislikes (Given): 1
Dislikes (Received): 6
Default

The gas gauge problem is definitely the sender.

I put an ohmmeter directly across the two wires where there is the moving contact along the resistor. When the float moves, the resistance just jumps around between a real high resistance and 0 ohms.

Oh well....it's been replaced and is working good now.
__________________

68 Camaro (?350 SB)
69 Camaro (L72 427 BB)
69 Camaro (DZ 302 SB - www.z28.net)
Camaro - A friendly flying car – from the French - the first half "camarade/friend" and the last half “aero/of the air".
Reply With Quote
  #35  
Old 10-08-2015, 01:19 AM
DavidS's Avatar
DavidS DavidS is offline
Missing a 67
 
Join Date: Jun 2010
Location: Granby, CT
Posts: 2,431
Post Thanks / Like
Thanks (Given): 370
Thanks (Received): 75
Likes (Given): 481
Likes (Received): 266
Dislikes (Given): 1
Dislikes (Received): 6
Default

Today sucked.

Herculiner does not stick to rust. Had to go the POR-15 route. Over the past few days, I read the instructions and did all the steps. Degreaser, then Metal Prep and then let it dry out for 24 hours.

This morning was POR-15 paint day with the truck outside. I had on grungy pants, a long shirt, face mask and long gloves. About 1/2 way through painting, my glasses started sliding off and I reached under the mask and pushed them up and then kept on painting.

I looked in the mirror about an hour later and I had POR-15 all over my nose.

There is no good way to take this crap off. I read everything online and gas, kerosene, lacquer thinner, etc do not work. I scraped my nose until it was red, raw and bleeding.

Going into work with a weird shaving accident (lol) >> than going into work with a black nose.

Yep. Today sucked.
__________________

68 Camaro (?350 SB)
69 Camaro (L72 427 BB)
69 Camaro (DZ 302 SB - www.z28.net)
Camaro - A friendly flying car – from the French - the first half "camarade/friend" and the last half “aero/of the air".
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:28 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.