Go Back   North East F-Body Association > Market Place > Cars-Parts F/S WTB

Reply
 
Thread Tools Display Modes
  #1  
Old 05-10-2014, 03:36 PM
whitdog54's Avatar
whitdog54 whitdog54 is offline
Shooting for 11's
 
Join Date: Oct 2009
Location: Springfield, MA
Posts: 402
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 2
Likes (Given): 1
Likes (Received): 27
Dislikes (Given): 0
Dislikes (Received): 0
Default 2000 Camaro Z28, 90k, t-tops, white

Hello, I have an Arctic White 2000 Camaro Z28 for sale. Has just under 98,000 miles, drives fine. I get about 25-27 highway MPG, around 18-20MPG in town.
Car was originally owned by a lady with kids (cleaned the interior like crazy when I got it, still a few stains, nothing major) then by a younger male who just enjoyed it on the weekends.

Car was in accident last spring, just cracked the fender around the front passenger wheel. Summer before that the drivers side was hit and needed the fender replaced as well and the control arm. The control arm just bent backwards, but the stock tie rods and shocks were still good, wasn't critical. I went down the 1/4 mile after this repair 4-5 times, felt fine. Car has about 20 total track passes.

Other then a few bruises the car still drives awesome, went 13.2@107mph and put down 321hp/327tq on a dynojet. It goes really well for an almost stock auto with 2.73s. Wouldn't hesitate to drive this car across the country.

Car has check engine code related to the alternator (exciter wire) and for the drivers side AIR pump, id did some searching, i believe there is just a valve that gets all gunked up and doesnt open or close properly. Been like this for a while, doesn't effect drive ability one bit. Nor does the alternator code, I was just unsure how to fix it, but again had both codes for a while and didn't notice a single problem.

Haven't driven the car since last spring, I just start it now and then, maybe go around the block and then it goes back in the garage. I have an OEM arctic white passenger fender and a red front bumper ready to be installed. Car does slowly leak oil from rear main seal, started last year. Oil loss is hardly noticeable during oil changes though, fills up the container the fresh oil came out of when I go to dispose. Trying to point out everything as best I can, not trying to screw anyone, these are fun cars I just don't have the time to get this car back to its former glory or better! I have clean title in hand and looking for a quick sale. Cash talks, I won't take 3500, so don't even ask. $4500 firm

I have video of cold start, but audio isn't working on PC. feel free to text/call 413.351_1400

Thanks, Sam


T-tops
Automatic with 2.73s
Cloth interior
Heat and AC work, all settings
SLP lid and smooth bellows
SLP Loudmouth 1 cat back exhaust
UMI subframe connectors
SPOHN sway bars
Salad shooters with winter tires and another pair of salad shooters with some 255 ET streets, about 30% tread.

Interior, 7/10. Has few minor stains, small crack on dash, cracked cubby holder, stitching coming undone passenger seat (see pics), and missing center console button. Both windows work, passenger seems a little slow.



<a href="http://s27.photobucket.com/user/whitdog54/media/camaro%20sale/enginebay_zpsf92caa32.jpg.html" target="_blank"><img src="http://i27.photobucket.com/albums/c165/whitdog54/camaro%20sale/enginebay_zpsf92caa32.jpg" border="0" alt=" photo enginebay_zpsf92caa32.jpg"/></a>









Before fender taken off:














__________________
2000 Firebird- Pacesetter headers & y-pipe | cacto 3" CAT | slp factory dual exhaust | whisper lid w/ K&N filter | aluminum DS | 3.42 w/LSD | 1LE sway bars 32/19mm | htchks STB | UMI LCA Relo's | UMI SFCs | 3" E-cut out | 1/4: 15.3 @ 88.87-SOLD
2000 Camaro Z28- SLP lid/smooth bellows | SLP dual/dual | UMI SFCs/STB | 2.73s | 13.2@106
http://www.offthelineracing.com/
Reply With Quote
  #2  
Old 05-10-2014, 03:58 PM
ZFreie's Avatar
ZFreie ZFreie is offline
The Geek
Tetris Champion, Space Invaders Champion
 
Join Date: Feb 2011
Location: Southern NH
Posts: 2,601
Post Thanks / Like
Thanks (Given): 177
Thanks (Received): 100
Likes (Given): 2351
Likes (Received): 230
Dislikes (Given): 57
Dislikes (Received): 14
Default

Good luck with sale!

I think you might be asking to much in its current condition, I know you wont take 3500 but for a quick sale you might have to cave. You could easily get more if it was clean, but someone cant just buy and drive it in its current shape.

Not trying to rain on your parade, just trying to help you move the car!
__________________
95 Z28 A4~Sold~

Quote:
Not driving your car to keep miles off of it is like not having sex with your girlfriend so her next boyfriend will appreciate it more.
Reply With Quote
  #3  
Old 05-10-2014, 10:09 PM
Mystery Bird's Avatar
Mystery Bird Mystery Bird is offline
Dave
 
Join Date: Mar 2014
Location: Lanesboro, MA
Posts: 205
Post Thanks / Like
Thanks (Given): 20
Thanks (Received): 3
Likes (Given): 4
Likes (Received): 29
Dislikes (Given): 0
Dislikes (Received): 0
Default

I was wondering why I haven't seen you at the track in a while. GLWS
__________________
1995 TA: Converted Nose...381 LT1...4L80E...12 bolt...3.90 Gears...4000 TC
Best 1/4 10.71@ 126, 1.46 60ft, 3450lbs.
http://www.youtube.com/user/MysteryBird1?feature=watch
Reply With Quote
  #4  
Old 05-18-2014, 10:34 PM
whitdog54's Avatar
whitdog54 whitdog54 is offline
Shooting for 11's
 
Join Date: Oct 2009
Location: Springfield, MA
Posts: 402
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 2
Likes (Given): 1
Likes (Received): 27
Dislikes (Given): 0
Dislikes (Received): 0
Default

I miss the track, I miss driving the car. It's been over a year since I've driven a vehicle with over 200HP lol. There was a nice c5 for sale by my work, was kinda seeing if I could just move the vehicle quick. I have the fender and bumper, just needs paint and to be mounted. If someone came up to me with$3500 in cash I'd be tempted, I have about another $1k in parts i could probably sell which would make a nice down payment.

Thanks for lookin, hope to see you guys at the track soon!
__________________
2000 Firebird- Pacesetter headers & y-pipe | cacto 3" CAT | slp factory dual exhaust | whisper lid w/ K&N filter | aluminum DS | 3.42 w/LSD | 1LE sway bars 32/19mm | htchks STB | UMI LCA Relo's | UMI SFCs | 3" E-cut out | 1/4: 15.3 @ 88.87-SOLD
2000 Camaro Z28- SLP lid/smooth bellows | SLP dual/dual | UMI SFCs/STB | 2.73s | 13.2@106
http://www.offthelineracing.com/
Reply With Quote
  #5  
Old 05-19-2014, 01:12 AM
Z28's Avatar
Z28 Z28 is offline
Runs 19's
 
Join Date: Sep 2012
Location: Westboro
Posts: 871
Post Thanks / Like
Thanks (Given): 23
Thanks (Received): 32
Likes (Given): 169
Likes (Received): 176
Dislikes (Given): 3
Dislikes (Received): 5
Default

Man, I really wish I could take this off your hands man, but I'm in the same exact situation as you lol
__________________
Victory Red 1994 Z28
in progress
Black 2000 S10
lowered/daily
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:47 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.