#1
|
|||
|
|||
255/55R16 Will they fit ok?
Looking at putting a bit bigger tire in the rear of my 99 Z and was wondering if anybody else has stuffed a set of these under the rear of their cars? They will be on my stock rims, so no backspacing issues to worry about, hopefully.
__________________
There is no replacement for displacement... 99 Camaro Z28 M6 - Sold Aug 2013 |
#2
|
|||
|
|||
do you mean 255 50 16s? those will fit, a 255 55 should fit as well but i cant say ive seen that size. 255 50 16s are half an inch taller than a 245 50. 255 55 would be 1.5" taller than a 245 50 and an inch taller than a 255 50.
__________________
1999 Z28 T-Top M6 - LS6, Bolt Ons, Suspension, MWC Narrowed 9" - 415rwhp 385rwtq 10.847 @ 125.17 1989 IROC-Z H/T M5 2006 F350 SCSB 4x4 6.0L Diesel - Studs, EGR Delete, Powermax Turbo, Extreme Tuning & Exhaust - 13.23 @ 101 |
#3
|
||||
|
||||
Good info Joe. And yes either size will fit under the car. They are only about 9.5 inches wide.
__________________
1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore. BAAAAAA!!!!!! |
#4
|
|||
|
|||
Yeah, just was wondering about the added height more than anything. Passed on the tires in question, looks like they were used on a car with some serious camber issues and dude offered no receipt from his shop. If that didn't raise a HUGE red flag I don't know what would have lol.
__________________
There is no replacement for displacement... 99 Camaro Z28 M6 - Sold Aug 2013 |
#5
|
||||
|
||||
I ran a 60 sidewall with no problem on stock suspension. winter tires though haha
__________________
2000 Firebird- Pacesetter headers & y-pipe | cacto 3" CAT | slp factory dual exhaust | whisper lid w/ K&N filter | aluminum DS | 3.42 w/LSD | 1LE sway bars 32/19mm | htchks STB | UMI LCA Relo's | UMI SFCs | 3" E-cut out | 1/4: 15.3 @ 88.87-SOLD 2000 Camaro Z28- SLP lid/smooth bellows | SLP dual/dual | UMI SFCs/STB | 2.73s | 13.2@106 http://www.offthelineracing.com/ |
|
|