#11
|
|||
|
|||
Same here but I still use Fram for some reason. I can get the Napa golds from work which are Wix filters though.
__________________
5.3L LSx, Fbody .500 cam, TH400, 4500 Stall, Moser 9" |
#12
|
||||
|
||||
I have had a couple of friends cars lose their engines due to a fram oil filter. Don't know the specifics but I was told that by a couple of people.
__________________
Ron 85 Monte SS, 2004 Corvette LS6 w/02 T56, 9" rearend, 390/364 rwhp/tq ,Slowhawk tuned, 3575 lbs 11.74@114.6mph BACK IN THE GAME!! DD 06 Cobalt SS/sc, stock w/k+n only 14.78@97mph http://www.cardomain.com/ride/2151623 http://www.racecarsbyhalls.com http://www.slowhawkperformance.com Another show Lady- Why does your car say Corvette on the engine? We have a Corvette and your car doesn't look like one. LMFAO |
#13
|
|||
|
|||
Huh, we cut open 4-5 different brands we had laying around one day cause we were curious. I remember the K&N was brittle as hell inside and crumbled when we touched it and all the rest were either brittle or had a lot less pleating inside than the fram. Didn't do an actual filtration test but it visually looked nicer inside than the rest we had on hand.
__________________
The fleet... |
#14
|
|||
|
|||
x2 fram sucks
i always use the delco filters (on all the trucks) but i use the k&n on the camaro for the same reason you r considering. ive never had a problem but really only drove 20,000 in 5 years. all in all im happy |
#15
|
||||
|
||||
The two specific issues I remember with Fram filters were cardboard end caps inside and less filter media than other brands. There may have been more but that's what I remember.
|
#16
|
|||
|
|||
From the ones that I cut open I can say that without a doubt the fram looked to have a lot more filter media than the rest that we had on hand.
__________________
The fleet... |
#17
|
||||
|
||||
Fram=Fail. ive actually seen them come apart. i will never use them again after seeing that. and i think K&N is a waiste of money unless its coming with a oil change special for cheap.
__________________
1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore. BAAAAAA!!!!!! |
#18
|
||||
|
||||
Here's a page I found with lots of in depth info on many brands of filters. This info is about ten years old, so some of it may not be accurate anymore.
http://people.msoe.edu/~yoderw/oilfi...lterstudy.html |
#19
|
||||
|
||||
oil filter
NAPA has a nascar one Black which is a WIC long one that chad fro Golden engines told me to use here is the part #91060
use only AC-DELCO or WIX filters
__________________
AHHHHHAHAHAHAHA 3 grand and Dump It!!!! [/FONT] |
#20
|
|||
|
|||
I actually stand by Amsoil Filters
I cut open a few different ones a while back, and Fram was all Paper and Cardboard.... WIX well that was flimsy and very little filter material from what I remember When we cut ope the Amsoil Filter it was solid and had two layers of metal mesh filter screens... I've had no issues using for Amsoil Filters almost 10 years now, but I only drive the car 3,500 miles a year... Although I do beat the snot out of it
__________________
1996 Z-28: Bolt-Ons, Harwood Cowl Hood, 18" Black Z06s 2005 Subaru Legacy GT - Stage 2 - My DD 2012 Audi S4 - The Wifee's Ride (Wait - the wife drives the fastest of the stable?) |
Thread Tools | |
Display Modes | |
|
|