North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   LQ4 S480 (http://www.northeastf-bodyassn.com/showthread.php?t=3759)

Camaro9969 06-23-2013 01:24 AM

Quote:

Originally Posted by Slowhawk (Post 81431)
What converter do you have?

Its an ati treemaster. It was specd for 342s so these 308s are really beating the hell out of everything

Slowhawk 06-23-2013 01:32 AM

First I've ever heard that. Gears aren't the problem at all. Probably converter efficiency. The tranny will cook in this weather, no doubt. Thats why you see all the turbo cars with fans on the tranny's after each pass.

Camaro9969 06-23-2013 02:08 AM

Quote:

Originally Posted by Slowhawk (Post 81433)
First I've ever heard that. Gears aren't the problem at all. Probably converter efficiency. The tranny will cook in this weather, no doubt. Thats why you see all the turbo cars with fans on the tranny's after each pass.

Ya I called ati and honestly they were a bunch of assholes. I spent 925 for the converter for them to tell me "I should of had it specd for 308s we cant do anything about it" transmission specalties built the th400 and when i talked to the builder he said ati hates them so I got caught in a pissing contest. I then called PTC and he was great even offered to buy my ati back if I choose to go with a new one. You dont think going to 342s will help it 60 better? I could go with a converter it would be about the same price I've never ddone a gear swap but a local shop did the 3.08s and charged 625 (rip off i know)

Slowhawk 06-23-2013 02:16 AM

Ati is behind on turbo converters.
There is a lot of stuff that affects launch. I launch at 9lbs and do 1.2 60's with a 3.00 gears and 28" tire. I 60' the same as the fords running 4.10 gears and a lot more boost.

Camaro9969 06-23-2013 02:27 AM

Quote:

Originally Posted by Slowhawk (Post 81435)
Ati is behind on turbo converters.
There is a lot of stuff that affects launch. I launch at 9lbs and do 1.2 60's with a 3.00 gears and 28" tire. I 60' the same as the fords running 4.10 gears and a lot more boost.

I have heard that lately about ATI too
That's crazy 9psi 1.2 wow that's amazing! I launched at 7 seems like the spot where I hook but only cut 1.54 my best with a 27" tire. It's either I try converter or gears maybe even both but I do like the 308s for driveability

Camaro9969 06-23-2013 02:31 AM

What converter do you have???

smokinss 06-23-2013 12:25 PM

PTC is a great choice. Have you looked into FTI. Greg hit it right on my th350 ss. Most of the big boosted guys are using him down here. Including a local guys 7sec twin turbo formula.
https://www.youtube.com/watch?v=afeZ...e_gdata_player

Camaro9969 06-23-2013 03:40 PM

Quote:

Originally Posted by smokinss (Post 81445)
PTC is a great choice. Have you looked into FTI. Greg hit it right on my th350 ss. Most of the big boosted guys are using him down here. Including a local guys 7sec twin turbo formula.
https://www.youtube.com/watch?v=afeZ...e_gdata_player

That car moves!
I have talked with greg before also. I am really big with customer service and Tim at PTC was very helpful. Also offered to buy my ATI for 500 bucks towards a new converter i really liked that so I think i'll go that route. I'm having some weird issues or maybe thats just the way this trans is. But its getting too damn hot. The converter burnt the paint off it. Tested all the lines getting great flow. My cooler isnt getting hot but the converter is so everyone is saying its gotta be something with that (besides ATI) The trans is a Transmission Specialties Th400 Pro Mod Sprag I just want everything fixed thats all and its irritating the hell out of me.

Slowhawk 06-23-2013 03:56 PM

PTC is the leader of turbo converters. Everyone else is trying to copy them.

Right now I run the Yank PY3400. It is a great converter but is showing more slip when I get up to the 1k hp mark.

PTC will be doing one soon for me but it's a big $$ converter to handle a lot of power.

Your temp will go through the roof at the track. Mine starts at 120-130. End of the run on the return road - 220-240. That's normal. You can not hot lap the car.

On the street I cruise at 140-160 temp.

Camaro9969 06-23-2013 04:18 PM

Quote:

Originally Posted by Slowhawk (Post 81454)
PTC is the leader of turbo converters. Everyone else is trying to copy them.

Right now I run the Yank PY3400. It is a great converter but is showing more slip when I get up to the 1k hp mark.

PTC will be doing one soon for me but it's a big $$ converter to handle a lot of power.

Your temp will go through the roof at the track. Mine starts at 120-130. End of the run on the return road - 220-240. That's normal. You can not hot lap the car.

On the street I cruise at 140-160 temp.

Awesome glad to hear that from you also because they got my vote soon as i talked with him he was on speakerphone with me having me tell him how much fluid my trans was pumping great guys there.
So this will give you a good laugh just checked my converter slip. My first pass when i was running 14psi (old cast wheel) had 6% slip
This last pass at 144 had 15.7%!!!!!!!!!!!!! Looks like i know who to call tomorrow.

Wow starts 120-130 then ends up 240 ok well i guess mine is about the same thats nuts. Do you get a little splash of fluid out the vent?
You run a fan under the car between passes or just let it sit there for a bit

Slowhawk 06-23-2013 05:19 PM

Mine is 25-28% slip right now. Imagine how much faster I'll go with a good converter. I see 7's at 18psi.

The heat is normal. I do races which gives a good hour cool downs. Also start the car and hit the line. No idling, moving in the lanes.

You just need to hang out with turbo people. Wasting a lot of $$.

Camaro9969 06-23-2013 06:20 PM

Quote:

Originally Posted by Slowhawk (Post 81456)
Mine is 25-28% slip right now. Imagine how much faster I'll go with a good converter. I see 7's at 18psi.

The heat is normal. I do races which gives a good hour cool downs. Also start the car and hit the line. No idling, moving in the lanes.

You just need to hang out with turbo people. Wasting a lot of $$.

Oh my god 25-28% haha with the right converter your going to get 4s no problem :)
Ya this turbo phenomenon is not cheap! And worst part is how addicing it is

KLAB 06-24-2013 01:03 PM

nice runs man! what track?

Camaro9969 06-24-2013 01:46 PM

Lebanon Valley

Camaro9969 06-24-2013 03:12 PM

Going to go with new springs and shocks instead of tthe converter why bother making more power I cant do anything with it. Don what spring you think i should use 300-325?

Slowhawk 06-24-2013 07:45 PM

I got my AFCO setup from Midwest chassis.

Since they are the experts with suspensions on these cars, they speced them out and nailed it.

Camaro9969 06-24-2013 08:40 PM

Quote:

Originally Posted by Slowhawk (Post 81487)
I got my AFCO setup from Midwest chassis.

Since they are the experts with suspensions on these cars, they speced them out and nailed it.

Awesome i just got off the phone with them an hour ago. I was going to go with the AFCO's but trying to save a little money and He told me that those new Viking's are a great product so i trusted what they told me and went with them and 300lb springs.

SLP IROC-Z 06-24-2013 08:46 PM

i went with the vikings as well, very pleased with them! cant beat the price of that setup!

My84Z 06-24-2013 09:06 PM

I'd throw some 3:20's area gears in it to to help out. Be alittle better for the converter especially with a 27" tire and not a 28" it'll be close enough to the 3:42 ratio spec. Ifthe converter was spec'd with a 28 tire for 3:42's that is.

Camaro9969 06-24-2013 09:25 PM

Quote:

Originally Posted by SLP IROC-Z (Post 81492)
i went with the vikings as well, very pleased with them! cant beat the price of that setup!

Awesome you like them?? I prob could of went with sa but he convinced me to get these. Really talked them up

Quote:

Originally Posted by My84Z (Post 81494)
I'd throw some 3:20's area gears in it to to help out. Be alittle better for the converter especially with a 27" tire and not a 28" it'll be close enough to the 3:42 ratio spec. Ifthe converter was spec'd with a 28 tire for 3:42's that is.

Wish I could use 320s It wouldnt of even been a debate which gear it was 3.08 or 3.42 and i wanted more streetable gear which these are awesome for I wish the moser had something between. I think the new coil overs will help hook. The guy who just swapped gears said to go 3.42s would be the ssame price which pissed me off considering he did all my seals and everything I figured he wwould cut a deal but nope ssame 625! If someone on here wants to help out ill gladly pay I hate gear oil that much!

My84Z 06-24-2013 09:52 PM

Are you running a 12 bolt? If so then keep a soft launch cause at that power level it won't last long.

Camaro9969 06-24-2013 10:06 PM

Quote:

Originally Posted by My84Z (Post 81498)
Are you running a 12 bolt? If so then keep a soft launch cause at that power level it won't last long.

Yes it should be good for a while 35 spline axles with a spool but never kmow

SLP IROC-Z 06-25-2013 02:36 AM

Quote:

Originally Posted by Camaro9969 (Post 81495)
Awesome you like them?? I prob could of went with sa but he convinced me to get these. Really talked them up

i love them, it would be stupid to pay the same price for a single adjustable kit imo. plus theyre built in the usa and have a good warranty. The owner of MWC went out of his way to contact me and spent a long time on the phone talking to me about suspensions his customer service alone sold me.

SLP IROC-Z 06-25-2013 02:36 AM

I can set up a new set of gears for you but i am a ride from you

Slowhawk 06-25-2013 03:26 AM

Now you just have to setup the shocks and all the drive angles. When the angles are right the car will hook. My front shock setup is pretty much useless since it is chained down, no extension at all. The rear suspension setup hooks the car.

I would change the converter long before the gears. A lot of people under estimate a converter.

Camaro9969 06-25-2013 09:48 AM

Quote:

Originally Posted by SLP IROC-Z (Post 81509)
i love them, it would be stupid to pay the same price for a single adjustable kit imo. plus theyre built in the usa and have a good warranty. The owner of MWC went out of his way to contact me and spent a long time on the phone talking to me about suspensions his customer service alone sold me.

Exactly he was really cool and I could hear him taking notes haha so like i said about ptc I like when I buy something and the shop actually cares. So far bullseye mwc and ptc have all been great!!


Quote:

Originally Posted by Slowhawk (Post 81513)
Now you just have to setup the shocks and all the drive angles. When the angles are right the car will hook. My front shock setup is pretty much useless since it is chained down, no extension at all. The rear suspension setup hooks the car.

I would change the converter long before the gears. A lot of people under estimate a converter.

That's nuts that your front shocks are basically useless.
When you said chained down does that just mean so it won't spring up and wheelie? I have decent rear shocks but nothing special its going to take a lot of adjustment on lca torque arm front and rear shocks to get it right but it will get there eventually. Lol

And I agree about the converter. I like the 3. 08s and I have a ton of slip already at mid power so that's what needs to be addressed next. Tim at ptc said he would buy back my aati so that really impressed me. Ill wait a couple weeks to get that so I can save up a little cash. Spending 6-1000 bucks a pop stings haha

Camaro9969 06-25-2013 09:52 AM

Quote:

Originally Posted by SLP IROC-Z (Post 81510)
I can set up a new set of gears for you but i am a ride from you

Thanks man if i do that ill let you know. I could trailer it there.

Slowhawk 06-25-2013 09:41 PM

$650 is not bad if it's being done in the car and he supplies the gears.

Camaro9969 06-27-2013 01:15 AM

He does great work too but for now i'm keeping the 308s i think they are a good set up and once i get the new coilovers i'll get the converter next and i think that will really make everything work nicer.

Quick question when i ran over 135 they mentioned to me i needed to get a neck brace and gloves. I just bought the sfi brace but do i need sfi gloves? i've been at the track a ton and never seen guys wearing gloves. Unless it was some huge event

Camaro9969 06-30-2013 03:01 PM

http://i39.photobucket.com/albums/e1...ps2be8a757.jpg
http://i39.photobucket.com/albums/e1...pseeba397d.jpg

Sorry for the shaky video my nephew took it
1999 Camaro SS Turbo Lq4 S480 9.9@142 - YouTube
6.3@116.55 1/8 mile 10.4@98 - YouTube
Video 4 - YouTube
1999 Camaro SS480 - YouTube

My pit crew :)
http://i39.photobucket.com/albums/e1...ps9e392c6d.jpg
http://i39.photobucket.com/albums/e1...psfb842ee0.jpg

Camaro9969 07-02-2013 01:03 PM

http://i39.photobucket.com/albums/e1...psba873303.jpg
These should help out!!

ILuvPizzaTimes10 07-03-2013 02:14 PM

little bit.......

LSX-Nation 07-03-2013 10:00 PM

nice!

Camaro9969 07-14-2013 12:51 PM

Got the Chassis Cert today and took it out for a drive.
http://youtu.be/WMQJY1j2szQ
http://youtu.be/xJQwsKW1eI8
http://youtu.be/ZCmqAClOhms

http://i39.photobucket.com/albums/e1...ps8f1f38c3.jpg
http://i39.photobucket.com/albums/e1...ps5855f528.jpg

Slowhawk 07-14-2013 11:01 PM

Looks sweet.

DavidS 07-16-2013 12:25 AM

Very nice and great videos!

Formula413 07-16-2013 01:09 AM

Just went for a ride in this car. HO-LY SHIT. First time I've ever felt what I would call scary fast.

DavidS 07-16-2013 01:41 AM

Quote:

Originally Posted by Formula413 (Post 81780)
Just went for a ride in this car. HO-LY SHIT. First time I've ever felt what I would call scary fast.

Nice! I'm wondering if I can get those shocks for a 68.

Camaro9969 07-16-2013 02:21 AM

Quote:

Originally Posted by Slowhawk (Post 81768)
Looks sweet.

Thanks man!!
Quote:

Originally Posted by Formula413 (Post 81780)
Just went for a ride in this car. HO-LY SHIT. First time I've ever felt what I would call scary fast.

Hahaha glad I got to take you for a rip. :)
Quote:

Originally Posted by DavidS (Post 81779)
Very nice and great videos!

Thanks ill have more on the way

SLP IROC-Z 07-16-2013 04:07 PM

Quote:

Originally Posted by DavidS (Post 81781)
Nice! I'm wondering if I can get those shocks for a 68.

yes you can, visit vi-king.com


All times are GMT. The time now is 09:56 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.