North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LSX Powertrain (http://www.northeastf-bodyassn.com/forumdisplay.php?f=37)
-   -   Intake ideas? MAF Questions too. (again) (http://www.northeastf-bodyassn.com/showthread.php?t=2245)

Formula413 01-22-2011 06:05 AM

Quote:

Originally Posted by c4boom (Post 37137)
mikes car runs we started it at the party :P

True fact, I was there :)

Bayer-Z28 01-22-2011 10:33 AM

Mine ran 403/38-something and needs a retune for sea level.

I've been wanting a retune, but I want to do the intake first. I'd like to see 440/390 out of this cam. It's a low end Tq cam, so I don't want anything that will kill the low end. It's got a 110* LSA, but only 5* of overlap.

I was just wondering about the MAF too because I was reading that you can go too big and that will throw the MAF off because it won't be getting a "bottle neck" (in a way) in order for it to get an accurate reading of what is really passing by its sensors. Too big is too slow, IIRC. I wonder if it'd be worth it to go SD tune.. I've asked around and the replies are mixed, but this isn't a DD car. It's just a street car.

I've been saying since day 1 that the 102 was too big for an LS1 and everyone was saying "Noez itss not!!! It's amazing!" but I never saw any numbers showing it was any better over a good 92 setup.

Bayer-Z28 01-22-2011 10:44 AM

And Don, if you find a FAST 92, could you PLEASE hold onto it for me!?!? For a decent price that is. Once tax season comes around I'll pick one up, IF I can find one that is. I found a damaged one on eBay last week, but I couldn't find the outer shell anywhere.

ILuvPizzaTimes10 01-22-2011 12:52 PM

why would sea level tune vs. 4000 feet tune make a difference on a MAF tuned car? maf should correct it self on a few street runs around here. and judging by your numbers your about right on for numbers based on the TSP bloated DynoJet numbers.

Fast sells the pieces to repair there intakes from individual runner to top and bottom "cases" if it was cheap enough id have bought it.

Bayer-Z28 01-23-2011 02:11 AM

^ I would have gotten that damaged FAST 92 if I could have found the shell easily enough.

If I could find all the pieces, I'd piece together an intake. :)

Batman 01-23-2011 11:48 AM

Wat Pizza is saying is FAST sells the shell pieces, you just have to call them

Bayer-Z28 01-23-2011 01:47 PM

I was wondering... I'll have to wait till I get my taxes done and give em a call. Doesn't make sense that they wouldn't sell the intakes anymore, but the pieces.

Bayer-Z28 01-24-2011 10:46 PM

85mm Delphi MAF on the way.. $75 shipped. :D

Found an ASP UDP with ARP Bolt AND both belts for $170 NIB.. But the fuker hasn't gotten back to me about it yet.

Bayer-Z28 02-07-2011 12:13 AM

Found flow #'s for the 92 and 102 non-ported. I've been looking for these for YEARS! 4" bore, but nearly same heads as mine. Worked over 243's. I'm running a .639" cam. I don't see the minimal gain being worth it for a 102 over a 92. Shown as head flow with the intake.

Would it still be ok to stick a 92mm TB on a 102 IM?

-=EDIT=-
On the contrary. Check out Mamo's post on here:
http://www.ls1tech.com/forums/genera...ween-fast.html

Quote:

Flowed our LS2, 243 CNC'd head on a 4.00" bore. Runner volume is ~225 cc and these are with 2.00" intake valves. These are going on a project here and since we have a few of the new 102's, I figured it was appropriate to update the flow numbers.

Fast 92 - Stock
.100 71.4
.200 144.7
.300 205.9
.400 235.7
.500 259.0
.550 270.8
.600 272.6
.650 276.2

Fast 102 - Stock
.100 74.4
.200 150.7
.300 211.9
.400 241.7
.500 265.6
.550 271.7
.600 274.0
.650 278.4

here is the link of the original post
http://forums.corvetteforum.com/c6-t...w-numbers.html

Slowhawk 02-07-2011 01:03 AM

Ok,so how does flow translate to hp/tq?


All times are GMT. The time now is 10:20 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.