North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LT1/TPI/TBI (http://www.northeastf-bodyassn.com/forumdisplay.php?f=36)
-   -   finally looking into the motor noise (http://www.northeastf-bodyassn.com/showthread.php?t=3125)

98 hoe 08-02-2011 02:11 AM

what do u recommend for a street clutch and a short throw

ILuvPizzaTimes10 08-02-2011 02:14 AM

i have a cheap ass fidanza short throw i got from ebay. lasted me 4 years and all i did was take it apart grease it up RELLY good and cut the stick a little shorter. do i recomend it on a Budget? yeah But if you can afford a Good Shifter get one. i Love the stock hurst base though.

and i havent been in the market in a long time for a clutch but Spec last i checked was the best LT1 clutch.

irockidz28 08-02-2011 05:27 PM

nice! ill be around later on. give me a call if your workin on it

Grovlet 08-03-2011 02:21 AM

For shifters - The MGW Short Throw seems to be the cream of the crop recently, and it definitely appears to be badass. I've got the SLP Hurst Shifter and Lou's Short Stick which also rocks. But if I was doing it now I think the MGW is cheaper overall and looks to be better quality.

For Clutch - I love my Spec Stage 2+ But if you need more holding power go 3+. Essentially the + is the non puck version of each stage, meaning it's a little less on/off but still holds the rated power level.

98 hoe 08-03-2011 11:58 AM

Thanks ill have to look into those 2

941LE 08-05-2011 02:46 AM

i like pizza went with the fidanza. I had no issues with it and loved it. Cant hurt that it was also cheap. I got a Spec stg 2+ for my LT1 but never got around to installing it. To bad i sold it already.

98 hoe 08-05-2011 02:56 AM

Yea I would have baught it but too late

98 hoe 08-08-2011 02:11 AM

Got the motor out tonight ill just have to tear it down now. Wish me luck

ILuvPizzaTimes10 08-08-2011 03:25 AM

if you need anything lemme know. i think we still have a short block stuffed away in 94 Mikes Shed?

98 hoe 08-09-2011 01:33 AM

well i got the motor apart tonight number 8 cylinder spun a bearing that explains the oil pressure lose and knock comin from the motor. lookin at the crank and rod the surfaces dont have any noticable scores or scratches have to mic them tomorrow may be able to throw bearings and an oil pump on it it close the bottom end.


All times are GMT. The time now is 12:23 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.