North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LT1/TPI/TBI (http://www.northeastf-bodyassn.com/forumdisplay.php?f=36)
-   -   lt1 tune (http://www.northeastf-bodyassn.com/showthread.php?t=3685)

KLAB 01-23-2012 09:17 PM

I MIGHT sell it after I finish my tuning but idk... I'm a sucker for holding onto old junk...

KB93z28 01-24-2012 12:37 AM

Quote:

Originally Posted by Mister Ree (Post 60812)
Not far from you off Rt. 140 just before entering Milford.
He's on a side street, so check your map first.
Great guy who knows his stuff...

http://smgmotoring.com/

<>

Yeah, Freds a good guy, he may be younger, but hes smart. He installed my 3.73's for me and Ive had no issues with them.

98 hoe 01-24-2012 02:06 AM

nice good to know. hey where did u get your 8000k hids for ur camaro?

KB93z28 01-25-2012 02:31 AM

Well as Im sure you know, our headlights are sealed beam headlights. So when you want to replace the bulb, you have to buy a whole new housing with the bulb already in it. Check this out:
http://ltxtech.com/forums/showthread...torial-of-Hids
All you have to do is carefully pry out the factory bulb, and then silicone the hid bulb in, but leave the little clear plastic ring that the bulb comes with on and use it like the guy did in the thread.
Its exactly what I did, and Ive had no problems with it for 2 years, and theyre much brighter. As for the HID kit itself, I bought it from here: http://www.intensehid.com/bulbs.html...FQnd4AodmlJ97Q

They make some great stuff, I have the same kit in my truck too, thats been going good for a year now too. If you want hids for just your low beams, get a kit for 9006 bulbs, your highs are 9005 i think. Id also recomend getting the slim ballasts as our engine bays are tight, but you could squeeze in the regular ballasts. But once you seal the HID bulb in the housing, its just a matter of hooking up the connections and your done.

941LE 01-25-2012 02:36 AM

I did it to mine. Takes 20 mins and the results speak for themselves. Your just gonna bind the fuck out of people.

98 hoe 01-25-2012 02:47 AM

Yea I got hid in my truck lowbeams and fogs 8000k so I'm familiar with the hid portion just not the sealed beam conversion so ill read the tread and thanks. Ps my truck blinds the fuck out of people I'm used to that. Ha ha

KLAB 01-25-2012 02:47 AM

I did the sealed beam HID conversion. Never again...

KB93z28 01-25-2012 03:05 AM

Quote:

Originally Posted by KLAB (Post 60902)
I did the sealed beam HID conversion. Never again...

Why?

KLAB 01-25-2012 04:55 AM

hid's belong in projectors. Projectors for the win!! :klab:

Grovlet 01-25-2012 03:07 PM

BlackBird Lighting has solutions including Projectors, but it's not cheap.

They just recently added the 93-97 Camaro Kits, and from what I've heard it's $1k for all four and ~$600 for lows only.

If you really want to jam an HID Kit into the Sealed Beam Lenses, I'd recommend: DDMTuning.com

I've had their 55W Kit in my older Legacy for going on 2 Years now with ZERO Issues. I would recommend the Battery Connection Upgrade though as HIDs do take some juice to startup and having that makes them turn on EVERY Time without issue. So $55 out the door for a 35W Kit with Slim Ballasts is totally worth it...


All times are GMT. The time now is 07:10 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.