North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Cars-Parts F/S WTB (http://www.northeastf-bodyassn.com/forumdisplay.php?f=19)
-   -   Need TH400 (http://www.northeastf-bodyassn.com/showthread.php?t=3807)

smokinss 02-27-2012 01:35 AM

I've got a built th350 in my ss that came out of my buddies 8sec turbo car and its held up just fine for me.

As far as a converter don't be cheep. I spent more on my converter from fti than I did the trans. Converter cost me 850+

Camaro9969 02-27-2012 12:11 PM

Ya i'll be calling yank for the converter to be specd for my set up, id do a 4l80 but a built one is like 3500 bucks screw that id rather spend the money elsewhere and lose a little highway driving. I have other cars for that.

ILuvPizzaTimes10 02-28-2012 04:27 AM

i think you missed the piont that sams car is running a Stock 4L80E????? just tuned and i Think Stalled?

SLP IROC-Z 02-28-2012 04:40 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 62624)
To put it in perspective. with proper tuning the 4L80E will handle almost 100hp as it sits stock. Sam is using one as well as don used one in his 6500 pound turbo avalanche. just some food for thought. But if this is Not going to be a driver then get a th400. they are just really sloppy for a street car tranny after they get stalled way up and built. could be me?? and i think the programmable shift points and far superior design of the modern tranny far out weigh the cheap and strong th400.

a half ton avalance doesnt weigh 6500. a 2500hd extended cab short bed 4x4 with a duramax is about 6500.

quik95lt1 02-28-2012 09:59 PM

fyi anything under 1000 hp and a strong th350 is all you need........no need for the weight and power loss......

84ta406 02-28-2012 11:42 PM

Quote:

Originally Posted by quik95lt1 (Post 62879)
fyi anything under 1000 hp and a strong th350 is all you need........no need for the weight and power loss......

Ive seen a lot of motors under 1000hp rip up TH350's. I just got done rebuilding one that was behind a 481ci BBC that looked like a grenade went off inside.

Slowhawk 02-29-2012 07:21 PM

The 350 tranny will not last as long as a 400 under decent power. My tranny was over the $3k mark and I still plan on rebuilds every winter.

quik95lt1 02-29-2012 07:47 PM

Quote:

Originally Posted by 84ta406 (Post 62889)
Ive seen a lot of motors under 1000hp rip up TH350's. I just got done rebuilding one that was behind a 481ci BBC that looked like a grenade went off inside.

got a friend of mine that ran a rossler th350 behind a 870rwhp nitrous motor......been in the car for 3 years now no problems.....like i said a "well" built one will.........of course there are alot of other variables in play....weight, launch rpm, driving style, so on a so forth..............not tyring to contradict just stating my experience :D......everybody told me i was nuts beating on a 4l60e in my car at my speed yet they are all sitting there looking as this trans is going on 5 years now behind this motor and ive never had an issue with it......

84ta406 03-01-2012 01:04 AM

Some people get lucky :)

I much prefer a TH400 in anything over 3000lbs and 650-700hp

SLP IROC-Z 03-01-2012 01:15 AM

depends on the application as well, car that sees alot of street miles & abuse vs a car that only makes 1/4 mile passes.


All times are GMT. The time now is 03:57 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.