North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LSX Powertrain (http://www.northeastf-bodyassn.com/forumdisplay.php?f=37)
-   -   Lifters (http://www.northeastf-bodyassn.com/showthread.php?t=1083)

ArcticSS 05-10-2010 08:10 PM

Alright, process of elimination. Changed the oil but i didnt use 10w-40. I put in 5w-30 with a little seafoam to see how that works after a few hundred miles then im gonna change it to 10w-40. Also going to tighten my headers just in case there is a header leak..

monytorris 05-11-2010 01:56 AM

I could also bring you to don's. Plus I do really need to get mine on the dyno and I desperately need a tune!

Bayer-Z28 05-11-2010 02:35 AM

Did you do the lifters already?

I'm tellin ya, it's the O-ring..

Slowhawk 05-11-2010 10:11 AM

Does this car have a cam or something in it? I keep seeing the o-ring fix but you only put that on the list if the oil pump has been off. The o-ring would also cause the oil pressure to bounce around.

The noise could be caused from anything.

Batman 05-11-2010 12:14 PM

Quote:

Originally Posted by Slowhawk (Post 19133)
The o-ring would also cause the oil pressure to bounce around.

see! The Don has spoken. I love it when he agrees with me, makes me feel all smart and stuff

Bayer-Z28 05-11-2010 01:11 PM

^ I'm thinking it's along the lines of the O-Ring or the pick up tube. The lifters for that #7 cyl are the first to see oil. Could be a bent pushrod too, but it wouldn't tick THAT bad. I had a fist full of bent pushrods in mine when I tore it apart for the h/c swap.

Batman 05-11-2010 01:48 PM

I think the 10W-40 will tell the story, I think it is just a sticky lifter but without hearing or seeing it it is hard to tell. Lifters sticking in the retainer aren't uncommon

ArcticSS 05-11-2010 02:00 PM

No i didnt do the lifters. I have to work every weekend. I didnt want to take off the heads if that wasnt the problem. Im gonna change the oil after about 500 miles or so because i put some seafoam in it. Me and tony tightened up my drivers side headers a little bit but didnt really make a difference. Headers were put on not to long ago and im thinkin maybe the gasket is pinched or blown on the bottom or not seated correctly and causing the tick.

I think i would need someone else to hear it because to me the sound doesnt seem to be coming from the valve covers and ive heard lifter ticks before. Ill try and borrow a video camera to upload a small video sound clip.

ArcticSS 05-11-2010 02:02 PM

Quote:

Originally Posted by Bayer-Z28 (Post 19138)
^ I'm thinking it's along the lines of the O-Ring or the pick up tube. The lifters for that #7 cyl are the first to see oil. Could be a bent pushrod too, but it wouldn't tick THAT bad. I had a fist full of bent pushrods in mine when I tore it apart for the h/c swap.

Nah i dont think its a bent pushrod. My 2000 SS i had before had a slightly bent pushrod and it sounds totally different.

*LS1* Queen 05-11-2010 07:59 PM

ya u def need to take a vid of it or something its really hard to diagnose that type of issue not hearing it.

Slowhawk 05-11-2010 11:30 PM

The easiest is to drive by my shop and I'll listen.

ILuvPizzaTimes10 05-11-2010 11:41 PM

^^ hello ^^

Bayer-Z28 05-12-2010 01:07 PM

Wait.. Wait...... When did the ticking start? is this your first set of headers? With header leaks, a pulsing/ticking sound is a primary leak, a solid hissing is a collector leak. Headers generally are a little more noisy due to the thinner walls of the tubing compared to the log manifolds.

Check your header bolts. I had a leak on my driver's side rear when I first installed my headers (2004). Re tightened the bolts and it was good to go.

Navy01z 05-12-2010 01:18 PM

I had a tick after my cam went in. Ended up being the o-ring for the pickup tube on the oil pump. Now.....no ticky.

Bayer-Z28 05-12-2010 02:33 PM

^ Another testimonial... :D Did you do an oil pump, though? I had that problem w my buddy's ms4 swap. Check a couple pages back, I posted a link.

ArcticSS 05-12-2010 03:17 PM

No i did not do any oil pump as ive only had the car a few weeks. Previous owner had the headers put on from what he was telling me not that long ago. You can hear the tick better outside the car next to the tire than undr the hood. The ticking was there when i bought the car, but i thought it was exhaust leak. Had the leaks welded but tick was still there although not as loud as before.

ArcticSS 05-12-2010 03:31 PM

Tried to upload a short video but it said upload failed because i am missing a security token and to see the admin. Do i have to buy these tokens? lol
Also tried photobucket but they are too large.Jesus I cant even upload a video.

Bayer-Z28 05-12-2010 03:35 PM

If you can hear if from the tire area, almost underneath near the collector, that's the #7 cyl lifter noise then. You said you checked the pushrods? it's something along the lines of the oil pump, the o-ring or the pick up. I'm pretty damn certain of it.

ArcticSS 05-12-2010 03:41 PM

No i havent had a chance to really do anything but tighten the headers.

Bayer-Z28 05-12-2010 03:58 PM

Yeah, if it's your DD, it's gonna take a solid afternoon to change the pump itself.

Batman 05-12-2010 05:25 PM

Quote:

Originally Posted by Bayer-Z28 (Post 19277)
^ Another testimonial... :D Did you do an oil pump, though? I had that problem w my buddy's ms4 swap. Check a couple pages back, I posted a link.

He also had like 15 PSI of oil pressure at idle too though, as soon as he goosed the throttle and the Oil pressure went up above 30 his tick would go away. Take it to Don, do it the smart way.

ILuvPizzaTimes10 05-12-2010 05:29 PM

Quote:

Originally Posted by ArcticSS (Post 19281)
Tried to upload a short video but it said upload failed because i am missing a security token and to see the admin. Do i have to buy these tokens? lol
Also tried photobucket but they are too large.Jesus I cant even upload a video.


send the video to my email. ill get it up for you.

mikebas5ett_1970@hotmail.com

as far as oil pump goes. unless its been off and disturbed theres no need to dig into the oil pump. again post up a video and then after we all bicker back and forth AGAIN. get up to Dons shop for bajesus sakessss

Bayer-Z28 05-13-2010 01:15 AM

^ Can we place bets on what we thing the problem is? :D

Batman 05-13-2010 02:26 AM

Without hearing it first hand? not on your life

Bayer-Z28 05-13-2010 02:49 AM

^ I've heard it before. I know what it sounds like. This an't my first rodeo... lol

I went thru this same ordeal on my buddy's 02 SOM SLP SS with his heads and cam swap. Came from the same area, and sounded the same.. Not the sewing machine noise, this sounds like a knock, but it's deceiving because it sounds like it's coming from the collector or the wheel well area. We thought it was the wrong push rod length so we did THREE pushrod changes, and none fixed the knocking. Then we got a push rod length checker and got the right size. We thought it was dead lifters, so we tore the car BACK apart again to replace the lifters. THEN we did the oil pump O-Ring. The O-Ring fixed it.

There wasn't a reputable, local LS* place out west, so most of the people came to me with their problems. = LOTS of research. Had a very mild vibration on a 99TA that was a pain to locate. It only did it at 1400rpm. Was reluctant to make that call with the car having 115k on it.

Batman 05-13-2010 12:32 PM

I will take the bet it isn't the O-ring though. With good oil pressure it can't be. it would either fluctuate or just be low.

Bayer-Z28 05-13-2010 12:40 PM

^ It's something along those lines. Pump or pickup.

ILuvPizzaTimes10 05-13-2010 03:27 PM

^^ i venture to say IF it is a bad lifter. its JUST a bad lifter. the more i think about it. if the oil pressure is good and the oil pump was never fucked with. why would it be the pick up or o ring?

ArcticSS 05-13-2010 05:31 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 19311)
send the video to my email. ill get it up for you.

mikebas5ett_1970@hotmail.com

as far as oil pump goes. unless its been off and disturbed theres no need to dig into the oil pump. again post up a video and then after we all bicker back and forth AGAIN. get up to Dons shop for bajesus sakessss

Video wont do any good because you cant even hear anything over the exhaust. Second not is that it wont upload in my email because it is too large. Its gonna end up having to be in person. But im leaving for florida in 2 weeks so idk.

ILuvPizzaTimes10 05-13-2010 06:03 PM

bring her up to Dons begining of next week.

*LS1* Queen 05-13-2010 08:33 PM

ya give don a call and see if u can stop by so he can hear it

Bayer-Z28 05-13-2010 10:41 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 19457)
^^ i venture to say IF it is a bad lifter. its JUST a bad lifter. the more i think about it. if the oil pressure is good and the oil pump was never fucked with. why would it be the pick up or o ring?

Isn't it just a LITTLE coincidental that it happens to be the #7 lifter? I know that's the problem cylinder, but that is also the one that gets oil first.

ILuvPizzaTimes10 05-13-2010 10:59 PM

im gunna laugh wen its the header flange gasket leaking.

84ta406 05-13-2010 11:30 PM

Bring it to Don. My dad took his car there to get diagnosed and it made a WORLD of diffrences.

BrokenFeather78 05-13-2010 11:39 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 19477)
im gunna laugh wen its the header flange gasket leaking.

Mine just started, guess what I'm doing saturday!

ILuvPizzaTimes10 05-13-2010 11:48 PM

yours just started?

BrokenFeather78 05-13-2010 11:52 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 19489)
yours just started?

Yeah last summer drivers side now pass side. Note to everyone kooks makes awesome headers but don't use their craptastic gaskets!

84ta406 05-14-2010 12:13 AM

I was always told to use GM header gaskets

ls6monte 05-14-2010 12:26 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 19477)
im gunna laugh wen its the header flange gasket leaking.

Just ask Justin aka smokinss! He pulled his whole engine apart just to find out it was a header gasket leak!

Batman 05-14-2010 12:38 AM

Quote:

Originally Posted by Bayer-Z28 (Post 19476)
Isn't it just a LITTLE coincidental that it happens to be the #7 lifter? I know that's the problem cylinder, but that is also the one that gets oil first.

If you can tell which lifter it is without putting a stethescope on it you are a way better man then me.


All times are GMT. The time now is 05:58 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.