^ link? I'll read it over. And the vacuum would be created at the TB.. If the TB is closed, then there should still be the same 28" or 32".. Whatever the # is.
-=edit=- vacuum would be created at the point of restriction = heads/valves/ports. But the intake plenum could also bee seen as a vacuum chamber but the TB regulates this. |
I can understand the 102 cause your probally going to be doing more modding down the road anways so atleast that way you can support it either way. hey in the end its your money.
|
I don't agree with that, the larger runners are what will kill you on stock cubes. You lose all your velocity. The 102 MM T/B isn't necessarily the problem, you can't push the kind of volume to make the 102 effective. Long runners = high RPM power. I Don't see you gaining much if anything but top end over an LS6 intake. The LS6 may bottle neck in the really high RPM but with something like TFS heads and a small/medium size cam for a car you want to be good ont he street and make lots of low and mid range power you aren't gonna be hurt that badly if not better off. I would def go LS6 before a 102 on the engine you are talking about. The 102 has proven in more then one app to be a lesser intake then it's smaller kin (just ask Don).
|
^ I sold my LS6 intake to a member here. I was seeing it as a bottle neck. Don was telling me to ditch it as well. And my cam is probably trying to pull more air through the heads than we realize. And I don't see a .639" cam as being small. The duration will fool ya.
And you guys' opinion does matter to me or else I would have bought the intake already. Still looking for a good deal. And I was thinking of a 102 with a 96mm TB. Something that won't kill the driveability with an on/off switch. |
tb size has little to do with how an intake performs on top of an intake port. AIR SPEED! its all about making sure the air moving threw the intake IE plenum and Runner size are sized properly for your setup. STuff a HUGE Tunnel ram on a stock chevy 350 and tell me if it makes any low end. that esentially what you will be doing with a FAST 102 on a midly modded LS1. TB size has nothing to do with it at that point does it?
|
^ That "low end" concern was addressed in regards to the runners. I CAN do a 102 intake with a 96mm TB. Been thinking of that. And the 90 and 92 flow the same FWIW.
Think of how an ITB intake works. This is almost that, minus 8 TB's. Just has one big one and 8 individual runners. If I can find a ported 92, I'll prolly do that. I PM'd my cam designer and asked him what he thinks.. And "mildly modded" ?? I don't get that? There must be a fine line between "eXtreme mods" and Mild. H/C is typical. Yes I have a stock bottom end, but the demand for air is still there. If I was just bolt ons looking at a full 102 setup, yeah.. That would be overkill. An LS6 intake would be fine then. Which is what I was back in 06. |
forget the T/B , the issue is having more air in the intake than a 346 CI engine can use. Doesn't matter how big the cam is there is only so much volume in the cylinders. The Long runners are the killer on the 102. if you can't flow that air into the cylinder the velocity slows down and it creates turbulence. If you had that cam on a 402 I would still say the 90 or 92 is better for the street but the 102 would at least be functional. I just don't see a 346 being able to pull in enough air to make that intake efficient. You will probably only make good numbers on the top end, which, if I am correct, isn't what you want. Yes the LS6 will be too small of an intake but between the 2 I think you would be happier with the LS6 for what you are asking the car to do. IMO I'd surf the boards and ebay and try to find a FAST 90, that, IMO is the correct intake for what you are doing
|
^ I actually found a couple places that sell the FAST 92 now. Just gotta know where to look. And I'm not sure. If it didn't work, then why are so many people using the intake? And as far as the runners being too big; don't know how it can be. They seem to be the same size as the 92, just removable, which take up more room in the intake = bigger overall body.
|
if it dosnt work then why do so many people buy them? try asking that on a mustang forum they would be more educated on that particular point.
|
reason people buy the 102 is because they stopped making/marketing the 92 and everyone thats on the boards think LS1 tech is Gods Country. and listen to there Sponsors/sales man.
Now the 102 does have longer runner. i think 1/4" longer if memory serves? also are a larger CC length obviously has to do with it. as well as larger plenum. i dont know how many ways i can slice it for you. research can only get you so far un less you get an unbiased opinion. But FAST has been in the buisness so long they have people in there back pocket as far as i can tell. and no matter were you look THERE SHITS the best!!! there isnt really much else out there that is better. But wen you pretty much stop making intakes for people in your boat. mildly modded motors. Yes mildly. your stock cubes small cam and heads? i dont mean to insult if your taking it the wrong way But your car puts down(i dont know average power.) but using your peak as a compare. Cam Only cars make just as much as you. So IMO Mildly modded LS1. thats just my take on your situation. id get a 92/92 setup and have it ported. it will out perform the 102 in all areas i can almost garantee it with your current mods. |
^ Yeah, I do take it kind of personal. I don't want an MS4 that will kill driveability and not really be of any use until over 3500 rpm. Call it a small cam all you want. And I'm not going for the low blow here so I'll stop now.. yeah, my car put down small-ish numbers for the setup, but my Y-pipe is smashed, the LT's are garbage, not to mention a stock TB and MAF on an LS6 intake with 243 heads. I KNOW this will push 450 rw with those parts replaced with better stuff. I just need time to get the income together for it. I'm closer now than I was last year. We all know these LS cars can surprise people.
But I agree that FAST pretty much monopolized the markert and it does piss people off. |
Quote:
Quote:
Quote:
Quote:
|
I asked my cam designer which intake HE recommends. He will have the final say for me.
|
And one last one... I'm just trying to kill some myths here. I was against this (102) intake from the beginning for the exact reasons that pizza has voiced here, but I have seen a LOT the data and from what I have gathered the 102 is an effective piece. Now I'm going to see what PatG recommends and I will go from there and onto real-world "tests" this spring.
Quote:
|
I don't think Pizza was trying to insult you with the mildly modded comment, but when you are talking to people on tech with 75MM+ turbos, 300 hits of nitrous are 430+ CI engines making 700+ wheel HP then yes, you are mildly modded. A H/C 346 is a baby in the LSx world now. Absolutely nothing wrong with it and I think it will make for a more enjoyable car for you, but when there are an awful lot of $30,000+ engines out there a 346 may as well be a VTEC 4 banger. I mean a stock LS3 will beat up on a lot of H/C 346's. It isn't an insult in any way shape or form. Exact same reason the 102 is "THE" intake right now, the market has gone to much larger engines. I still think the FAST 90 is the best bet for you, port match to the intake runners and I think you would be very happy with it. It was fantastic on my 346 and made power all the way to redline. Just my $.02, do with it as you will. Unfortunately the people who have them aren't giving them up for that exact reason.
|
The guy from AFR isn't lying, but the key sentence there is "start turning some RPM's". AFR heads and a 102 intake are gonna make a ton of top end so of course he is going to recommend it. I have absolutely no doubt a 102 will make more HP then an LS6, or a Fast 90/92, but it is all gonna be up high in the RPM range. If that is what you want then go for it, but it is exactly the opposite of what you said you were going for. He is a salesman who wants you to buy HIS products and giving you the pitch 90% of buyers like to hear "my set up makes more HP then theirs". What we have been trying to steer you toward is a more useful power band, but yes, there is no free lunch, you will lose peak ponies in the process. When I was working to get my engine together I decided I spent a whole lot more time in the low RPM range than wound out above 4000 RPM so that's what I went for. So it's up to you, either way is a win win but the car will drive significantly different depending on your choice
|
^ I heard back from my cam designer and he said it will be money well spent. Said the gains will be dramatic compared to an LS6 intake (duh.) Mamo gave me a good price for a 102. Worse comes to worse, I can sell it or trade it back to him (he'll sell it as a trade for a used piece. Good a good price, so I won't be taking a hit.) I had to pass on one of his ported 92's a month or so ago at a killer price. I just didn't have the money at the time and of course NOW that I DO have the money, the deals have flat-lined. Just the way ti goes I guess.
And I agree that the LS3 and up are the new crowd, and I would LOVE an LS3, but I can't swing that right now or prolly even this year, so I'm just going to tweak what I have for now. |
Alot of talk for just a stock 346ci build.. LOL
Custom Cam designer must be Patrick. I remember when he knew nothing about Cams..LOL. Nice guy, good sales pitch. Magic Cams ? -no. It's all setup design for power curve. I can get a SV intake to make more power than the LS6/FAST intakes but it is Cam/head combo's that dictate it all. We made 460hp/435tq (peak at 6200rpm)out of a TR224 Cam/ported stock 00 Z heads car on our old dynojet. Alot of detail when putting it together. If you bounce around the net and put parts together more than likely the combo will not be matched and the owner is disapointed. |
^ Agreed. I never asked what heads I should use until recently (never thought of it... Live and learn), but I found a set of P+P'd 243 heads in mint condition apparently done by Wheel 2 Wheel in Detroit on Tech classifieds back in 07 and they were a budget head at the time. Assembled and shipped for $600, IIRC.. Apparently they're not as bad as I thought. I lumped them into the 241 stocker category. They're not top of the line, but they're good for what they are. Someone mentioned to ask your cam designer what they would recommend, so I did.
Ordered the 102 a couple minutes ago and got a good deal on it, shipped. (Sold my camera gear to fund it) I'll prolly get one of the eBay TB's. There have been good reviews on them lately. I've already got the 85mm MAF, all I need now is fuel rails and 42# injectors. Was going to get the LS3 rails as a budget, but we'll see how the prices play out. $130 for LS3 rails, or $150 for the billet budget rails kit from Speedinc. Just going to need the spacers, FPR and lines. And gotta find some damn fernco. And different lid. Was thinking of an SD tune, but being a street car, I don't think it'd be the best idea. |
my car runs GREAT!!!! Speed Density. and really your car is speed density all of them are the maf just cleans it up.
|
^ Yeah, that's what I was reading. Neat stuff. I've been back and fourth about the SD thing. From what I gather, it goes off the VE tables (IIRC) and compares to the MAF data. So it's running off an "idea" of how much air is coming into the engine based on set parameters. again, IIRC. Half the crowd tells me to keep it until Mods dictate deleting it and the other half say go SD.
What happened to yours anyway?? last I paid attention it was down and you decided to keep it. |
Dude you are well within the parameters for MAF control on your car, you are making it more complicated than it has to be. Keep the MAF, it will run better overall because it can make more automatic adjustments than an SD tune. Even a stock MAF will not be a bottleneck for you and can be tuned for what you are doing, if you are sweating it get the AC delco screened 85MM MAF with the adapters for the wiring. Pizza car is ALOT different than what you are trying and SD was the best way for him, but for a HC 346 I wouldn't even try. And I bet the 102 is gonna be wrong for what you are talking about, I will go on record now. You will make lots of HP above 4500 and that'll be it. Hopefully you prove me wrong. If you are going to do fuel rails go for the billet ones, and I am a big fan of Nick Williams TB's. Not sure what ebay T/B you are talking about but I would do it once and do it right.
|
^ I'm not pushing the SD idea. It didn't get far with me.. And the LT1 is a different platform. I don't compare anything about my stuff to that.
Already got an 85mm TB based on other advice I've gotten here. I think from Don, but don't quote me on that one. I wanted the NW TB, but I haven't decided yet.. There's a thread floating around Tech about the eBay TB's. From what I've heard it's the same casting as the name brands, but minus the name. I'll have to look it up as I haven't done much reading on it at all. And only way to tell how this is all going to pan out is to get it running and to get it tuned. I'll prolly have to trailer it as I've read one or two threads about fresh 102 installs that don't want to idle. No big deal for me, I'll figure it out. -=EDIT=- Here's the TB. Looks identical to the FAST. http://cgi.ebay.com/ebaymotors/GM-GE...ht_3454wt_1042 Thread: http://www.ls1tech.com/forums/genera...le-bodies.html |
i just feel no maf simplifies a modded car. it may cause a fuel economy suffer. but other then that i dont really see the benifits of running one on a car modified much past stock bolt ons. maybe its me.
|
^ Meh.. I don't really know much better. I just see the LT and LS as two completely different setups. All I knew was that the LT was a MAP setup/SD. I didn't think they had a MAF setup.
|
Quote:
|
94-97 LT1s use a MAF, 92-93 are SD
|
^ I thought it may have been the later models with the MAF. Was wondering if I DID see one on a TA with a CAI.
|
LT and LS have little to do with how an engine will run based on moddifications and tuning. my car is also running an LS computer hence it runs as if it was an LS. and it runs Awesome just the way it is OL/SD!! and i like it that way. one less then to go bad/fuck up. once you start moving the maf from stock locations, adding "cold airs" lids Oiled air filters your asking for maf issues.
|
^ I mean it's just a different platform. They all use, essentially, the same sensors to monitor and control engine activities. I forgot you're running an LS harness. I just don't compare the two sides. I don't know much about LT series other than the Opti setup and that long tubes are murder to install. :haha:
I've been running a K&N since 2000 or so on my cars and haven't had a problem. Just be easy on the oil, only apply to the outside, dab up any extra and let it dry for a while before using it. And I did some experimenting/testing this winter: http://ls1tech.com/forums/generation...-argument.html |
I use the K&N oil in the spray can, as opposed to the bottle. It's much easier to apply that way and you almost can't over oil it unless you really tried.
|
^ I gotta look for that.. Still gotta find a good cleaner substitute that will work instead of their stupid pump dispenser for the cleaner. HATE that damn thing!
|
This is the aerosol K&N oil, much easier to use:
http://shop.advanceautoparts.com/web..._P|GRP2026____ The instructions for the bottled oil say to saturate the filter and let it drip dry. Fuck that, that will still be wayyyyyy too much oil. Easy to apply just the right amount with the aerosol can. |
Pshhhh my dads K&N out of the damn box foiled his MAF... fuckin POS...
|
If you can see the droplets, there's too much on there, IMO.. I only spray one side and never had a problem.. Check that link I posted. Wiped down the INSIDE of my lid a couple months back and it was clean. I've have never cleaned that lid, to my recollection.
|
So a clean lid is your proof your K&N doesnt pass any oil?
if the oil can pass threw a cotton gause filter im pretty sure the oil wont "stick" to the top of the lid. especially under vaccum. wich is wen you will have oil passing threw anyway. didnt you also go on to say you hads to clean your maf to get your car to run right/stop consuming fuel? how can a maf get dirty IF the air filter as you say is cleaned properly oiled properly and meticulously maintained. i use a K&N only because it was free. i will buy a paper filter wen the time come(spring) and never look back. i have never seen so many dirty mafs on cars other then these f buckets. and EVERYTIME someone i know has a dirty maf its a damn K&N sitting there. NOT saying that only K&N's cause dirty mafs Or cars without them will never have a bad/dirty maf. just saying more often then not its a K&N and Only beacuse of how close it is in proximity to the maf itself. |
Or you can get one of the dry hi po filters that are out there, they do exist. In fact I think GMPP makes one for our cars
|
have you ever seen a car run faster/slower with a paper or oiled filter. track time rwhp means shit. at the track Does it will it make a difference? ive seen cars run a tenth faster with NO air filter. but never a difference from one filter style to another. K&N is to air filters as SLIC 50 was to motor oil. the shit they sellin yah just aint true.
|
I agree 100% with Pizza... Ohh yeah I use a paper filter
|
K&N filters do offer slightly restriction than paper, problem is they are less efficient. I've read that people have run K&N filters and had their oil analyzed and seen more silica than with a paper filter. I would run paper but there's no paper filter to fit my CAI.
|
| All times are GMT. The time now is 10:30 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.