North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Pictures/Videos (http://www.northeastf-bodyassn.com/forumdisplay.php?f=12)
-   -   car is going back to Stock lol (http://www.northeastf-bodyassn.com/showthread.php?t=4852)

ILuvPizzaTimes10 05-01-2013 05:51 PM

what cam are you using? base circle? heads cut? stock push rods/longer? alot of things make a "bad" lifter noise that have nothing to do with lifters.

camarokid91 05-01-2013 08:42 PM

Quote:

Originally Posted by Slowhawk (Post 79892)
Make sure you find something bad before throwing parts at it.

So I have a full set to replace the currents from my co workers recent cam swap. I'm basically just supplying gaskets and my time to do this. Don the noise actually completely stopped (weird) when I got home from picking the car up, then I let it idle for 30 minutes and it started again. I'am 90% on the lifter being the issue, the rods are all fine.

camarokid91 05-01-2013 09:12 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 79893)
what cam are you using? base circle? heads cut? stock push rods/longer? alot of things make a "bad" lifter noise that have nothing to do with lifters.

This is on a 100% stock unopened ls1. Heres the noise.


My84Z 05-01-2013 09:37 PM

Did u change the oil? Most likely it could be a lifter but simple things first

ILuvPizzaTimes10 05-02-2013 12:33 AM

and what was the hot idle oil pressure?

camarokid91 05-02-2013 02:32 AM

Pressure is all normal 45 at hot idle 60 under load. Car has new oil in it and seafoam.

Slowhawk 05-02-2013 10:06 PM

Probably a bad lifter then. Was knocking pretty good here but if the noise went away I would guess lifter.

camarokid91 05-06-2013 11:29 PM

Car no longer ticks. Thank God. It was a weak lifter.

ILuvPizzaTimes10 05-06-2013 11:38 PM

Nice!!!!! Sucks yah had to rip the heads off!! Stupid LS1!!!

smokinss 05-07-2013 01:20 AM

Good deal. Just got mine torn down. Heads will be off tomorrow


All times are GMT. The time now is 12:22 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.