North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LSX Powertrain (http://www.northeastf-bodyassn.com/forumdisplay.php?f=37)
-   -   Lifters (http://www.northeastf-bodyassn.com/showthread.php?t=1083)

*LS1* Queen 05-14-2010 12:39 AM

stupid exhausts hahaha...im not guessing cause i havent heard it. lol

Bayer-Z28 05-14-2010 12:57 AM

Quote:

Originally Posted by Batman (Post 19499)
If you can tell which lifter it is without putting a stethescope on it you are a way better man then me.

The lifters for #7 cyl see oil first.. Not sure EXACTLY which one, but I'll guess the Exh lifter for the #7 cyl sees the fresh oil first.

ILuvPizzaTimes10 05-14-2010 12:58 AM

So if they saw oil FIRST.... wouldnt that make it properly oiled. and the lifters that get oiled LAST have a problem?

irockidz28 05-14-2010 12:59 AM

^ that would make sence

Bayer-Z28 05-14-2010 01:08 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 19508)
So if they saw oil FIRST.... wouldnt that make it properly oiled. and the lifters that get oiled LAST have a problem?

READ THIS.. POST 59
http://www.ls1tech.com/forums/genera...preload-3.html
Original thread.
http://www.ls1tech.com/forums/genera...r-preload.html


HOW MANY TIMES DO I HAVE TO EXPLAIN THIS?! If it's a bad O-Ring, the FIRST lifter to see that oil will NOT be pumping up all the way = TICKING!
http://www.ls1tech.com/forums/genera...preload-3.html

NOW I'm getting irritated. I'VE BEEN THRU THIS. My buddy threw $600 in parts in his car chasing this problem when it was a $3 O-Ring.

ILuvPizzaTimes10 05-14-2010 01:19 AM

haha your not making any sense, he CHANGE the cam and Hence had to remove the oil pump? this car has not had the front cover off as far as we know. WHY would it be the oring. again. ill argue this till im blue in the face ask tony. haha. untill we hear it in person. you and i are BOTH wrong.

Bayer-Z28 05-14-2010 01:22 AM

I HAVE HEARD IT.. I know what it sounds like..

Kind of a shitty vid, but this was what we had a problem with.
http://www.youtube.com/watch?v=CfNfdj-wtt8

Ok. If the oil is being aerated, the #7 lifter will not pump up all the way and will be spongy. Like bad brakes. I dunno.. I'm just gonna sit back and wait. Maybe the pump went.

Which would be easier/cheaper? Take the heads off and spend $100+ for gaskets and bolts or take the pulley and WP off to check the pump? Rubber + oil = a sloppy piece of rubber.

What did he replace with the cam? That should be a more accurate question. Did he measure for the correct length pushrods?

I've also heard of something going wrong with the lifter and it chewing up the cam. Just find that #7 thing being a little coincidental.

Navy01z 05-14-2010 01:46 AM

Quote:

Originally Posted by BrokenFeather78 (Post 19491)
Yeah last summer drivers side now pass side. Note to everyone kooks makes awesome headers but don't use their craptastic gaskets!

I didnt. I used gaskets from ThunderRacing. GM gaskets I believe.

ILuvPizzaTimes10 05-14-2010 01:56 AM

Quote:

Originally Posted by Bayer-Z28 (Post 19522)
I HAVE HEARD IT.. I know what it sounds like..

Kind of a shitty vid, but this was what we had a problem with.
http://www.youtube.com/watch?v=CfNfdj-wtt8

Ok. If the oil is being aerated, the #7 lifter will not pump up all the way and will be spongy. Like bad brakes. I dunno.. I'm just gonna sit back and wait. Maybe the pump went.

Which would be easier/cheaper? Take the heads off and spend $100+ for gaskets and bolts or take the pulley and WP off to check the pump? Rubber + oil = a sloppy piece of rubber.

What did he replace with the cam? That should be a more accurate question. Did he measure for the correct length pushrods?

I've also heard of something going wrong with the lifter and it chewing up the cam. Just find that #7 thing being a little coincidental.


hahaha your getting too worked up over this MAN!!!!! its just an online forum. BUT have you heard Arctic SS' car? thats the question? no one else has heard it. i think your getting more worked up then He is hahaha. chillax it will all work out in the end. and hey guess what if your right you get to say i told you so. haha:nanafuck:

Batman 05-14-2010 01:57 AM

I'm just saying how do you know it isn't cylinder #5? I mean I know by ear only I can tell if it is the left or the right side, but the harmonics of an engine won't really let you say it is cylinder 7 on the exhaust side as it bangs away at 800 RPM. And has anyone even heard the car in person yet? I just think that since all of it is untouched and his Oil pressure is good it isn't the pump or the O-ring. But what do I know, not like I ever work on these things.

Bayer-Z28 05-14-2010 02:41 AM

Yeah.... Anyway.. I'm goin up to Maine for a couple days to see my aunt before I head out to Vegas.. I'll still be on here tho.. Until I get bored or something.

ArcticSS 05-14-2010 03:13 AM

Quote:

Originally Posted by Slowhawk (Post 19198)
The easiest is to drive by my shop and I'll listen.

Hey Don, do you want me to call you and make an appointment? When im up there i might inquire if i need a tune also. Dont think i need one but you'll hear how it runs. Im available to bring it up there on Saturday or anytime during the day Monday,Tues or Weds just for a listen andwhat you think.

ILuvPizzaTimes10 05-14-2010 05:05 AM

youd be better off sending him a call. he doesnt check here much wen he gets busy.

Slowhawk 05-16-2010 12:32 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 19576)
youd be better off sending him a call. he doesnt check here much wen he gets busy.

Got that right.Stupid busy now. Give the shop a call and leave a message. I'll return the call.

ArcticSS 05-18-2010 03:12 PM

Quote:

Originally Posted by Slowhawk (Post 19692)
Got that right.Stupid busy now. Give the shop a call and leave a message. I'll return the call.

See you saturday.

TBerry95z28 05-20-2010 01:31 AM

Quote:

Originally Posted by ArcticSS (Post 19918)
See you saturday.

i thought you lived in florida arctic?

BrokenFeather78 05-20-2010 01:40 AM

Thats smokinss T

TBerry95z28 05-20-2010 01:48 AM

oh shit got them mixed up haha thanks feather

ILuvPizzaTimes10 05-20-2010 01:54 AM

^^ MORON!!!!! ^^

TBerry95z28 05-20-2010 01:58 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 20034)
^^ MORON!!!!! ^^

hey none of that pizza boy ;)

ILuvPizzaTimes10 05-20-2010 04:33 AM

Quote:

Originally Posted by TBerry95z28 (Post 20037)
hey none of that pizza boy ;)


^^ sucks :nanacock: for coke???? ^^^ i think sooooooo

TBerry95z28 05-20-2010 12:35 PM

^^ sucks :nanacock: ^^ for free yess sirr haha

ArcticSS 05-20-2010 02:09 PM

Quote:

Originally Posted by TBerry95z28 (Post 20027)
i thought you lived in florida arctic?

Nah i live in warren which is like 5 min from Swansea

smokinss 05-20-2010 08:17 PM

Yeah I live in Florida. And yeah I tore down my motor and found out I had a header leak. Anyway, you make any progress yet???

nem SS 05-20-2010 10:05 PM

lucas

ArcticSS 05-21-2010 03:54 AM

Goin to see Don saturday afternoon. Im hopin its just a stupid header or collector leak.

ArcticSS 05-22-2010 06:19 PM

Yeah everybody was wrong!!! Turns out two of my front drivers side plugs were backing out of the block and were only hand tight. As soon as they were tightened the ticking/leak went away. Thanks Don. Prob would be calling you soon about a tune when i get back from florida.

84ta406 05-22-2010 08:09 PM

And thats why I didnt guess... Glad the problem is solved!

BrokenFeather78 05-22-2010 10:04 PM

Wow that's a first!

Batman 05-22-2010 10:48 PM

Told you it wasn't the oil pump, pay up!

ls6monte 05-22-2010 10:54 PM

Kool Derrick! Glad it was an easy fix.

*LS1* Queen 05-23-2010 02:07 AM

well good thing is was nothing major

smokinss 05-23-2010 11:37 AM

Damn thats the first Ive heard of that on a ls1. Sounds kinda like the fords that used to strip the plugs right outta the head.

Slowhawk 05-23-2010 02:33 PM

I've seen it a few times.He started the car,listened a bit and saw the plug boots shaking.Car cooled a bit and 2 plugs were almost ready to fall out.Tightened and he was on his way.

c4boom 05-23-2010 03:05 PM

that's awesome that it was that simple.

ILuvPizzaTimes10 05-24-2010 12:18 AM

KICK ASSS!!!!!! man thats good news!!! HEY BAYER...... Umm you suck... just saying

Bayer-Z28 05-29-2010 05:58 PM

^ .. it could have been anything.. Sometimes it's the stupidest things that kick our asses..


I'd love to mouth off, but I'm too tired to think of anything..

ILuvPizzaTimes10 05-29-2010 06:17 PM

hahahaha Lazy Ass!!!

Bayer-Z28 05-29-2010 07:43 PM

I mean you guys thought it was the lifters. You were gonna have the poor guy rip the heads off to replace em. On top of prices for gaskets and a weekend of not having the car... So I'm not the only dumbass.


All times are GMT. The time now is 06:01 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.