North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   LQ4 S480 (http://www.northeastf-bodyassn.com/showthread.php?t=3759)

Camaro9969 03-24-2012 10:28 PM

ok thanks i'll drill it out. Does the 2.5 plug in the intake hole or do you have to tap it and run a vacuum line to it

Camaro9969 03-27-2012 10:35 PM

Got it fired up today :) only ran it a few seconds since no coolant was very careful but glad to hear it run!! Got her in with help from Joe and Sam thanks guys!

http://youtu.be/zUeqLg_ZTNI

fasta**z28 03-28-2012 12:00 AM

no problem doug glad i could assist !!! ne time ne time !!! things gonna be a beast!!

ILuvPizzaTimes10 03-28-2012 02:25 AM

NICEEE!!!!! CONGRATS!!!

Camaro9969 03-31-2012 12:18 AM

Thanks man ran it for a while today got coolant in it god damn it sounds NASTY!!! almost died from the smell since there isnt a thing hooked up lol

Camaro9969 04-03-2012 06:01 PM

A better longer video of it running. seems great just mocking up the turbo piping and running fuel lines for the new injectors and pumps.

http://youtu.be/eatPFiXkT5o

ILuvPizzaTimes10 04-05-2012 12:11 AM

sounds Nice!!!! are those forward facing manifolds open?

Camaro9969 04-05-2012 12:36 AM

Thanks man. Ya forward manifolds are open quiet in the garage haha, This motor sounds so more powerful than the LS1 sounded. gotta get the piping mocked up either sat or sometime next week then out comes the motor again lol but after its done once it becomes simple. Its unreal how easy it is to get it out under the car

Camaro9969 05-14-2012 11:05 PM

Got the V Bands Welded on. Ran the Turbo oil lines, Return -10 and supply all set. Decided to use my truck Coils since i heard they are a little better. Also went to a BBK 80mm TB. Running my fuel lines -8 Supply and -6 return got all the old stuff out i can already tell getting the -8an fuel lines are going to be a nightmare to fit over the tank! Throwing the motor back in again hopefully this weekend and turbo kit will be mocked up with the rad and intercooler. Want this done by middle of next month :)

http://i39.photobucket.com/albums/e1...1/IMAG0754.jpg
http://i39.photobucket.com/albums/e1...1/IMAG0755.jpg
http://i39.photobucket.com/albums/e1...1/IMAG0757.jpg
http://i39.photobucket.com/albums/e1...1/IMAG0741.jpg
http://i39.photobucket.com/albums/e1...1/IMAG0742.jpg

whitdog54 05-15-2012 04:53 PM

Those lines and rails look sick!

Formula413 05-15-2012 04:59 PM

Looking good Doug

Camaro9969 05-30-2012 07:21 PM

Motor back in for the 3rd time! Changed up the fuel reg supply and return. Waiting for some more fittings as always they are getting annoying 18 bucks a piece gets old really quick! Ordered the fuel pumps and smaller injectors to get it going. 83's Hopefully putting in the rear and transmission this weekend if i have the time


http://i39.photobucket.com/albums/e1...1/IMAG0772.jpg

black heartbeat 05-30-2012 11:50 PM

Quote:

Originally Posted by ls6monte (Post 61733)
You hate everybody!

You are going to be the slowest car on this site very soon it looks like!! lol

His car moves...so its faster than mine lol

ILuvPizzaTimes10 05-31-2012 01:09 AM

Quote:

Originally Posted by Camaro9969 (Post 69170)
Motor back in for the 3rd time! Changed up the fuel reg supply and return. Waiting for some more fittings as always they are getting annoying 18 bucks a piece gets old really quick! Ordered the fuel pumps and smaller injectors to get it going. 83's Hopefully putting in the rear and transmission this weekend if i have the time


http://i39.photobucket.com/albums/e1...1/IMAG0772.jpg

NICE!!!! NOW WERE IS THE TURBO!?!?!?!?!?!?!

Camaro9969 05-31-2012 10:52 AM

That's the last part. :) I wanted to get the fuel all set and drive train in we are going to start mocking it this weekend with the intercooler and radiator

Camaro9969 08-06-2012 12:49 PM

Car is getting very close just the turbo kit left so about another couple weekends before its driving again. Got the rear in, chromoly driveshaft, Spohn torque arm. All new rear suspension, TH400 rmvb by transmission specalities, FTI Converter and Yank Flexplate.
http://i39.photobucket.com/albums/e1...IMAG0873-2.jpg

http://i39.photobucket.com/albums/e1...1/IMAG0899.jpg
http://i39.photobucket.com/albums/e1...3781958387.jpg
http://i39.photobucket.com/albums/e1...3781911681.jpg
http://i39.photobucket.com/albums/e1...3824576531.jpg

ILuvPizzaTimes10 08-06-2012 02:28 PM

Kick Ass!!!! Good Luck!! by end of season!?!?!?

Camaro9969 08-06-2012 03:00 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 72015)
Kick Ass!!!! Good Luck!! by end of season!?!?!?

Thanks man. Hoping to have it running in 3 weeks tops. The turbo kit is going to be the easiest part of this build haha After putting the rear end and transmission on my back by myself this will be a nice break!

Camaro9969 08-06-2012 03:05 PM

Couple other pics Hurst shifter, i dont like it but it came with the tranny had to make mounts for it and used the 6speed console.
http://i39.photobucket.com/albums/e1...1/IMAG0890.jpg
http://i39.photobucket.com/albums/e1...1267324696.jpg

ILuvPizzaTimes10 08-06-2012 03:59 PM

MAN THAT CARS FAST!!!! 5PSI and its not even running WOOHOOOO

VinnyDz28 08-06-2012 09:40 PM

looks badass!! It's coming along great... I'm very jealous lol this thing is gonna fly!

Camaro9969 08-06-2012 11:55 PM

Quote:

Originally Posted by VinnyDz28 (Post 72031)
looks badass!! It's coming along great... I'm very jealous lol this thing is gonna fly!

Thanks man. As long as its fun thats all i want. Its been so much work I am sick of working on it lol

Formula413 08-07-2012 01:37 AM

Kickass man! Let me know when you're bringing it to the track, I want to see it rip!

Camaro9969 08-07-2012 01:45 PM

Will do it wont be long. You will see it i'm sure since i work right next to you haha this whole project has been way more expensive than i wanted so anyone who thinks a turbo build is a "budget" is wrong!

VinnyDz28 08-07-2012 09:21 PM

Quote:

Originally Posted by Camaro9969 (Post 72057)
Will do it wont be long. You will see it i'm sure since i work right next to you haha this whole project has been way more expensive than i wanted so anyone who thinks a turbo build is a "budget" is wrong!

yeah but you built it the right way with a block that can support it :cool:

Kalstar 08-07-2012 10:08 PM

Outstanding. You sould be a very happy camper.

Slowhawk 08-08-2012 12:45 AM

Quote:

Originally Posted by Camaro9969 (Post 72057)
Will do it wont be long. You will see it i'm sure since i work right next to you haha this whole project has been way more expensive than i wanted so anyone who thinks a turbo build is a "budget" is wrong!

I think we warned you.. LOL

That fuel bucket is cut open, right?

Camaro9969 08-08-2012 01:04 AM

Quote:

Originally Posted by Slowhawk (Post 72075)
I think we warned you.. LOL

That fuel bucket is cut open, right?

Haha ya your not kidding!! Ya it is open. Not too much but has some holes. I saw Lonnie's puts no holes I just figured it can't hurt to cut a few in it

Camaro9969 09-11-2012 02:07 AM

Getting it fitted then ceramic coated will add a ton of pictures my buddy is a great welder and has two other requests for LS turbo kits ill have a lot of detailed pictures soon. All pipes were high quality schedule 10 stainless not cheap shit these ebay kits use I can't believe those kits cost 2400 on some sites...

http://i39.photobucket.com/albums/e1...IMAG0954-1.jpg
http://i39.photobucket.com/albums/e1...48-5895110.jpg

Formula413 09-11-2012 02:40 AM

Still hoping for some October T&T or is it looking like next year?

Camaro9969 09-11-2012 07:32 AM

We are hoping 3 weeks tops and ill race it here till its too cold haha. I'm taking a week off and towing it to Florida and racing it there. :)

Slowhawk 09-12-2012 12:15 AM

Thought you already had the turbo kit done?

Looks like your copying me now.. LOL

Camaro9969 09-14-2012 11:12 AM

Quote:

Originally Posted by Slowhawk (Post 73467)
Thought you already had the turbo kit done?

Looks like your copying me now.. LOL

Will add all pics when its completely welded its tacked up now

What do you Copying? I'm guessing request for kits? Lol

Camaro9969 09-14-2012 11:19 AM

My buddy got the collector all done true twin scroll/divided housing all pipe is schedule 10 stainless. 2.5" merged into the divided flange. :)

http://i39.photobucket.com/albums/e1...11-1395708.jpg
http://i39.photobucket.com/albums/e1...03-0695210.jpg
http://i39.photobucket.com/albums/e1...1/IMAG0970.jpg
http://i39.photobucket.com/albums/e1...1/IMAG0966.jpg
http://i39.photobucket.com/albums/e1...1/IMAG0964.jpg
http://i39.photobucket.com/albums/e1...1/IMAG0967.jpg
http://i39.photobucket.com/albums/e1...1/IMAG0968.jpg
http://i39.photobucket.com/albums/e1...1/IMAG0969.jpg

ls6monte 09-14-2012 04:18 PM

Some very nice welding there! My friend would be envious of that! He is so anal about nice welds. Looks good!

Camaro9969 09-14-2012 04:57 PM

Quote:

Originally Posted by ls6monte (Post 73571)
Some very nice welding there! My friend would be envious of that! He is so anal about nice welds. Looks good!

Thanks man. Ya it really looks great. He does some awesome work! I'm lucky because id have no clue how to begin to even weld haha.

ILuvPizzaTimes10 09-15-2012 12:59 AM

Yeah man welds look great!! set up looks good. can't wait to line up with yah next year!!

Camaro9969 09-15-2012 01:37 AM

Thanks man. I believe Ned closes later than Lebanon right?? Ill be racing a couple weeks around here then taking it to Florida for a week to get some more runs.

BadBird505 09-15-2012 02:09 AM

that is coming along real nice!

Camaro9969 09-18-2012 07:34 PM

http://i39.photobucket.com/albums/e1...17-5495763.jpg


All times are GMT. The time now is 08:52 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.