North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   LQ4 S480 (http://www.northeastf-bodyassn.com/showthread.php?t=3759)

Camaro9969 10-11-2012 03:18 PM

Exhaust done 5" obviously not keeping it this length ill cut it close to the bumper. Intercooler piping and top radiator mount left and a few small things then its time to drive. :)

http://i39.photobucket.com/albums/e1...IMAG1047-1.jpg
http://i39.photobucket.com/albums/e1...AG1043-1-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1055-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1045-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1044-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1053-2.jpg

Made some Exhaust trim rings today

http://i39.photobucket.com/albums/e1...1/IMAG1058.jpg
http://i39.photobucket.com/albums/e1...AG1059-1-1.jpg

ZFreie 10-11-2012 04:46 PM

I'm in favor in keeping the exhaust that length!

Formula413 10-12-2012 12:01 AM

Yeah leave it, it looks badass! LOL Looking good man, can't wait to see and hear it!

Camaro9969 10-14-2012 05:49 PM

Haha thanks. I'm going to do something with the exhaust maybe a 90 like a turbo pro mod car we will see. After going to englishtown this weekend I might have to sell my rx7 and buy a proline racing motor that shit is incredible!

Slowhawk 10-14-2012 11:44 PM

Where are my trim rings? lol

Proline is nice, there are other LS motors out there too. Ohio Boy's run ERL shortblocks. Proline is know for the 550+ci motors. Ussually $40k+ for them..

Camaro9969 10-15-2012 12:03 AM

Quote:

Originally Posted by Slowhawk (Post 74878)
Where are my trim rings? lol

Proline is nice, there are other LS motors out there too. Ohio Boy's run ERL shortblocks. Proline is know for the 550+ci motors. Ussually $40k+ for them..

Ya Tim lynch and jason enoz run a 540 and its 69k for the motor lol but those cars dominate! Gonzalez with that proline El general hit a 5.78 249 these outlaw and pro mod do some mind blowing numbers.

What size you need ill make a few for you just give me the diameter you want and metal thickness ill send you whatever you need. Those ones were 22 gauge. There was no way I was spending 40 plus dollars on stuff I could make in 15mins haha

Slowhawk 10-15-2012 01:43 AM

Ya, I'm friends with Jason. He's one sick person. We build his ls cars for him.
Also freinds with the Demarco's which run proline.
Too rich for my blood.

Right now my exhaust is 3.5". So 4" rings are good. I want a gap in there.

Thanks.

Camaro9969 10-15-2012 02:29 AM

Quote:

Originally Posted by Slowhawk (Post 74887)
Ya, I'm friends with Jason. He's one sick person. We build his ls cars for him.
Also freinds with the Demarco's which run proline.
Too rich for my blood.

Right now my exhaust is 3.5". So 4" rings are good. I want a gap in there.

Thanks.

Ya I don't get how those guys have the money for those cars I'd guess Jason's mustang has to be around 300k

Ok Ill leave it blank so you can do the holes wherever you want. Ill send a few different thicknesses so you can pick the one you like best.

Camaro9969 10-17-2012 11:24 PM

Got everything mocked up and will be finish welded this weekend. :) (no wise ass "how much boost will the tape hold" comments lol but definitely pumped but heres some pictures of the work. Once everything is welded it will be painted. Will be driving next week!!!!!!!! Might be taking it to Mir for the import vs domestic shootout
Time for the SS480 to hit the streets hahaha
http://i39.photobucket.com/albums/e1...1/IMAG1104.jpg

http://i39.photobucket.com/albums/e1...1/IMAG1106.jpg

http://i39.photobucket.com/albums/e1...1/IMAG1108.jpg
http://i39.photobucket.com/albums/e1...53-4095507.jpg
http://i39.photobucket.com/albums/e1...-0295520-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1114-1.jpg

ILuvPizzaTimes10 10-17-2012 11:45 PM

Turbo is awesome but I don't think I could cut up my car that way.

ls6monte 10-17-2012 11:57 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 75014)
Turbo is awesome but I don't think I could cut up my car that way.

Why not? You cut the nose off in your sig! lol

ILuvPizzaTimes10 10-17-2012 11:59 PM

I didn't make it. And atleast mines the right color!! Asshole!

Camaro9969 10-18-2012 12:17 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 75014)
Turbo is awesome but I don't think I could cut up my car that way.

Just have a few beers and cut a chunk out. Haha We will be making a nice piece for the top came up with some cool ideas it will look really good. Next year ill probably cut the entire front end off lol

ls6monte 10-18-2012 01:05 AM

Quote:

Originally Posted by Camaro9969 (Post 75020)
Just have a few beers and cut a chunk out. Haha We will be making a nice piece for the top came up with some cool ideas it will look really good. Next year ill probably cut the entire front end off lol

Pizza doesn't drink so that wouldn't work! lol

Camaro9969 10-18-2012 01:08 AM

Quote:

Originally Posted by ls6monte (Post 75032)
Pizza doesn't drink so that wouldn't work! lol

Well just go for it we arent driving Ferraris here. :)

Camaro9969 11-12-2012 05:53 PM

Working on the finish welding :)
And for those who want to know this is all Schedule 10 SS and the whole hot side with brace and flange is only 16lbs!!!!!!

http://i39.photobucket.com/albums/e1...IMAG1150-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1152-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1156-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1154-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1157-1.jpg

Real Flowmaster!
http://i39.photobucket.com/albums/e1...IMAG1146-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1149-1.jpg

Camaro9969 11-12-2012 05:54 PM

Got more done last night fabbed up the hood latch
http://i39.photobucket.com/albums/e1...-3695564-1.jpg
Notch in the frame for the 5" exhaust....
http://i39.photobucket.com/albums/e1...IMAG1186-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1187-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1194-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1183-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1180-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1178-1.jpg

ILuvPizzaTimes10 11-12-2012 11:33 PM

thats coming along Great man!! Nice machine and fab work!!!

Slowhawk 11-14-2012 01:05 AM

Make sure you triple check the cooler and radiator height. The radiator support looks low from the pics.

Camaro9969 11-14-2012 05:15 AM

Quote:

Originally Posted by Slowhawk (Post 75789)
Make sure you triple check the cooler and radiator height. The radiator support looks low from the pics.

Ya i made sure and checked .......its 4" higher than the k member we should be ok. I hope....

Camaro9969 12-01-2012 12:11 PM

All the cold piping welded with the Tial Bov on. Working on the hot pipes with wastegates today
http://i39.photobucket.com/albums/e1...-5895866-1.jpg
http://i39.photobucket.com/albums/e1...-5295723-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1213-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1216-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1214-1.jpg

Slowhawk 12-01-2012 02:12 PM

I would suggest you add a second blow off before the cooler. Helps the turbo bearings.

LSX-Nation 12-01-2012 07:59 PM

Looks good man.

ILuvPizzaTimes10 12-01-2012 08:44 PM

Yeah man looks good! Will be ready by spring for sure! And do what slowhawk sez. Sams car had an issue with that and I believe that fixed it. Best to ask him.

Camaro9969 12-02-2012 12:56 PM

Ya ill get another bov but I think ill get a tial knock off for the hidden one haha I spent way too much money on gates and the bov I'm sick of it :) here's the hot side all welded throwing the gates on today
http://i39.photobucket.com/albums/e1...28-0295271.jpg
http://i39.photobucket.com/albums/e1...-2495491-1.jpg
http://i39.photobucket.com/albums/e1...-4095989-1.jpg
http://i39.photobucket.com/albums/e1...-1295625-1.jpg

Camaro9969 12-02-2012 10:37 PM

http://i39.photobucket.com/albums/e1...1/IMAG1222.jpg
http://i39.photobucket.com/albums/e1...IMAG1227-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1226-1.jpg
http://i39.photobucket.com/albums/e1...IMAG1225-1.jpg

Slowhawk 12-03-2012 02:25 PM

How much $$ are you over your original plan?

I try to explain to customers how much it cost's and nobody gets it.

Camaro9969 12-03-2012 03:13 PM

Quote:

Originally Posted by Slowhawk (Post 76206)
How much $$ are you over your original plan?

I try to explain to customers how much it cost's and nobody gets it.

Ya no kidding people always want a "budget build" but you just can't do a cheap set up that will actually work. Ya maybe once or twice but how fun is that tearing stuff apart every week.
I never really had an idea of what I wanted to spend but the little things add up so fast nobody gets it until they try and do one of these projects. Just like you said nobody gets it you can't slap a turbo on and drive it doesnt work that way! if I picked a number I'm $3000+ more than I wanted to spend. But as you know its never ending I already want upgrades and I haven't even fired it up yet!

Slowhawk 12-04-2012 10:37 PM

Yes, building a car like yours is a money loser for a shop like us. A ton of time to do. I remember you said it would be done last july. I laughed..

Atleast it gets done right, good enough to blow apart the motor then take it aprt for bigger. LOL

Camaro9969 12-04-2012 11:16 PM

Quote:

Originally Posted by Slowhawk (Post 76282)
Yes, building a car like yours is a money loser for a shop like us. A ton of time to do. I remember you said it would be done last july. I laughed..

Atleast it gets done right, good enough to blow apart the motor then take it aprt for bigger. LOL

If i had a shop like yours and someone asked me to do all the work that we have done I would charge 30k EASY!!! People dont get it how much time and effort goes into this stuff. So i'm sure you get the daily call "how much to put a turbo on my car?" that must piss you off!!!!!!!!!!

haha ya i wanted it done in April hahahaha but i could have had it done if i wanted to slap something together for it to last 1 pass and look like shit but just like you said when you want something right you have to take time and do a lot of research.

Yup thats why i have another motor in my garage i'm building over the winter LOL its a friggen addiction.

Slowhawk 12-05-2012 02:33 PM

What about a cage? 10 point minimum but should look at 25.5.

ILuvPizzaTimes10 12-05-2012 03:01 PM

or he can be like sam and just go up race a couple passes till they realize then head home...... haha

Camaro9969 12-05-2012 04:48 PM

Haha I want to drive it a little then the cage will be started over the winter. I want to run low 9s so a 10 will do I just hope I do not get hooked and want to hit 8s. I'm trying to keep it a street car

Slowhawk 12-05-2012 06:24 PM

Your car should be running 8's from how you have it built now.

I would seriously consider caging it this winter. Then you won't be whining in the spring when you can't race it anywhere.,

Camaro9969 12-05-2012 10:37 PM

Quote:

Originally Posted by Slowhawk (Post 76330)
Your car should be running 8's from how you have it built now.

I would seriously consider caging it this winter. Then you won't be whining in the spring when you can't race it anywhere.,

Thanks man I appreciate that I sure hope it can get into the 8s just really never set a goal just kept buying parts left and right.
Your right I might as well do the cage this winter get it over with. I know people go back and forth about chromoly you actually think its worth it when all is said and done?

ILuvPizzaTimes10 12-06-2012 02:16 AM

stronger and lighter. spend the money do it once!

Camaro9969 12-06-2012 10:58 AM

Ya I wonder how much lighter it is when its all together. The pre bent ones are cheap but fitmemt isn't as good as they say. It would be awesome to make an entire cage but Benders aren't cheap lol

Slowhawk 12-06-2012 01:53 PM

Have a proffesional shop do a chromoly one. There are lots of rules out there. You need chromoly because you can add on to it. reg steel is only good for 8.5's.

Do it now while the shops are not so busy. Springtime could be a 3-4 month wait.

Camaro9969 12-06-2012 08:19 PM

Quote:

Originally Posted by Slowhawk (Post 76400)
Have a proffesional shop do a chromoly one. There are lots of rules out there. You need chromoly because you can add on to it. reg steel is only good for 8.5's.

Do it now while the shops are not so busy. Springtime could be a 3-4 month wait.

8.5's is plenty for me but chromoly it is like you said in case i need to add to it. I've noticed the rules get crazy once you get under the 9.0 mark as i'm seeing with Curt. When he ran the 8 they wanted him to go up to the tower! LOL

Slowhawk 12-06-2012 10:20 PM

Curt never did the one easy thing- Have the cage cert. done.

When you go to the track you want to run, not play games and get 1-2 runs in.


All times are GMT. The time now is 03:53 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.