North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   LQ4 S480 (http://www.northeastf-bodyassn.com/showthread.php?t=3759)

Formula413 10-04-2013 02:39 AM

You're starting to accumulate a nice pile of broken parts! LOL

Camaro9969 10-04-2013 03:02 AM

Quote:

Originally Posted by Formula413 (Post 83437)
You're starting to accumulate a nice pile of broken parts! LOL

Scrap metal :) its what happens when you make too much power for stock parts (this motor at least)
But now got a 370 and getting my new stock crank put in all coated bearings mains studded weisco -11cc pistons and compstar rods .......

camarokid91 10-04-2013 01:56 PM

Damn that sucks and is an expensive fix.

Camaro9969 10-04-2013 02:19 PM

Quote:

Originally Posted by camarokid91 (Post 83440)
Damn that sucks and is an expensive fix.

it was only a 300 dollar motor i could of bought another stock motor or even just put bearings in my old rods threw them in the motor that bent rods would of cost me about 150 but i just dont want to deal with a stock bottom end anymore. Its awesome to say you ran this or made this power but I have too much to do to always be working on my own car. I have 3 customers turbo builds to do and my car needs to go away! lol

Slowhawk 10-04-2013 02:21 PM

Now just remember a forged motor can break too if pushed too hard. Spend the time and make sure all the parts going on the motor are strong too. Then make sure you tune with octain to keep the hot spots out of the motor.

Camaro9969 10-04-2013 03:15 PM

Quote:

Originally Posted by Slowhawk (Post 83443)
Now just remember a forged motor can break too if pushed too hard. Spend the time and make sure all the parts going on the motor are strong too. Then make sure you tune with octain to keep the hot spots out of the motor.

Oh i know that one thats why i thought of going with another stocker.
Its at the shop getting line honed main studs coated bearings everything needed to hopefully stay together. I bought a new oil pump will run AMS oil again just whatever the engine builder says i should run depending on the oil clearances i told him i wanted .0025-.0028, I am only going to run c16 for the rest of the year and come spring i will have a meth kit from you.

Slowhawk 10-04-2013 03:25 PM

Well, my motor will come out in a month or so. We'll see how it looks after a season. I know it needs rings but that should be it.

Camaro9969 10-25-2013 10:30 PM

Ran today have the lowering springs in back cut a 1.36 60' but screwed up my 1-2 shift. Either I spun on the launch or almost hit the back bumper. Car has way more torque couldn't leace with more than 10psi and maxed at 20psi. Had a 9.7@95 lol and a 10.3@149.61 now my rear shocks are showing their heads so ill see what I can do the next few days but to keep it down the rear needs adjustment

1999 Camaro SS480 Idle - YouTube

http://i39.photobucket.com/albums/e1...ps0be4eb72.jpg
http://i39.photobucket.com/albums/e1...ps53ef5257.jpg
http://i39.photobucket.com/albums/e1...psa2d88511.jpg
http://i39.photobucket.com/albums/e1...psa35cb5ef.jpg

Z28 10-25-2013 10:39 PM

Duuuude that hood is tits!

Camaro9969 10-25-2013 10:52 PM

Quote:

Originally Posted by Z28 (Post 83905)
Duuuude that hood is tits!

Thanks man personally its a bit much for me i llike the sstock hood but long story short my sss broke. :( got this in a pinch but very light. Needs a real paint job also


All times are GMT. The time now is 09:56 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.