North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LSX Powertrain (http://www.northeastf-bodyassn.com/forumdisplay.php?f=37)
-   -   Lifters (http://www.northeastf-bodyassn.com/showthread.php?t=1083)

Slowhawk 05-11-2010 11:30 PM

The easiest is to drive by my shop and I'll listen.

ILuvPizzaTimes10 05-11-2010 11:41 PM

^^ hello ^^

Bayer-Z28 05-12-2010 01:07 PM

Wait.. Wait...... When did the ticking start? is this your first set of headers? With header leaks, a pulsing/ticking sound is a primary leak, a solid hissing is a collector leak. Headers generally are a little more noisy due to the thinner walls of the tubing compared to the log manifolds.

Check your header bolts. I had a leak on my driver's side rear when I first installed my headers (2004). Re tightened the bolts and it was good to go.

Navy01z 05-12-2010 01:18 PM

I had a tick after my cam went in. Ended up being the o-ring for the pickup tube on the oil pump. Now.....no ticky.

Bayer-Z28 05-12-2010 02:33 PM

^ Another testimonial... :D Did you do an oil pump, though? I had that problem w my buddy's ms4 swap. Check a couple pages back, I posted a link.

ArcticSS 05-12-2010 03:17 PM

No i did not do any oil pump as ive only had the car a few weeks. Previous owner had the headers put on from what he was telling me not that long ago. You can hear the tick better outside the car next to the tire than undr the hood. The ticking was there when i bought the car, but i thought it was exhaust leak. Had the leaks welded but tick was still there although not as loud as before.

ArcticSS 05-12-2010 03:31 PM

Tried to upload a short video but it said upload failed because i am missing a security token and to see the admin. Do i have to buy these tokens? lol
Also tried photobucket but they are too large.Jesus I cant even upload a video.

Bayer-Z28 05-12-2010 03:35 PM

If you can hear if from the tire area, almost underneath near the collector, that's the #7 cyl lifter noise then. You said you checked the pushrods? it's something along the lines of the oil pump, the o-ring or the pick up. I'm pretty damn certain of it.

ArcticSS 05-12-2010 03:41 PM

No i havent had a chance to really do anything but tighten the headers.

Bayer-Z28 05-12-2010 03:58 PM

Yeah, if it's your DD, it's gonna take a solid afternoon to change the pump itself.


All times are GMT. The time now is 06:15 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.