^ Yeah, I do take it kind of personal. I don't want an MS4 that will kill driveability and not really be of any use until over 3500 rpm. Call it a small cam all you want. And I'm not going for the low blow here so I'll stop now.. yeah, my car put down small-ish numbers for the setup, but my Y-pipe is smashed, the LT's are garbage, not to mention a stock TB and MAF on an LS6 intake with 243 heads. I KNOW this will push 450 rw with those parts replaced with better stuff. I just need time to get the income together for it. I'm closer now than I was last year. We all know these LS cars can surprise people.
But I agree that FAST pretty much monopolized the markert and it does piss people off. |
Quote:
Quote:
Quote:
Quote:
|
I asked my cam designer which intake HE recommends. He will have the final say for me.
|
And one last one... I'm just trying to kill some myths here. I was against this (102) intake from the beginning for the exact reasons that pizza has voiced here, but I have seen a LOT the data and from what I have gathered the 102 is an effective piece. Now I'm going to see what PatG recommends and I will go from there and onto real-world "tests" this spring.
Quote:
|
I don't think Pizza was trying to insult you with the mildly modded comment, but when you are talking to people on tech with 75MM+ turbos, 300 hits of nitrous are 430+ CI engines making 700+ wheel HP then yes, you are mildly modded. A H/C 346 is a baby in the LSx world now. Absolutely nothing wrong with it and I think it will make for a more enjoyable car for you, but when there are an awful lot of $30,000+ engines out there a 346 may as well be a VTEC 4 banger. I mean a stock LS3 will beat up on a lot of H/C 346's. It isn't an insult in any way shape or form. Exact same reason the 102 is "THE" intake right now, the market has gone to much larger engines. I still think the FAST 90 is the best bet for you, port match to the intake runners and I think you would be very happy with it. It was fantastic on my 346 and made power all the way to redline. Just my $.02, do with it as you will. Unfortunately the people who have them aren't giving them up for that exact reason.
|
The guy from AFR isn't lying, but the key sentence there is "start turning some RPM's". AFR heads and a 102 intake are gonna make a ton of top end so of course he is going to recommend it. I have absolutely no doubt a 102 will make more HP then an LS6, or a Fast 90/92, but it is all gonna be up high in the RPM range. If that is what you want then go for it, but it is exactly the opposite of what you said you were going for. He is a salesman who wants you to buy HIS products and giving you the pitch 90% of buyers like to hear "my set up makes more HP then theirs". What we have been trying to steer you toward is a more useful power band, but yes, there is no free lunch, you will lose peak ponies in the process. When I was working to get my engine together I decided I spent a whole lot more time in the low RPM range than wound out above 4000 RPM so that's what I went for. So it's up to you, either way is a win win but the car will drive significantly different depending on your choice
|
^ I heard back from my cam designer and he said it will be money well spent. Said the gains will be dramatic compared to an LS6 intake (duh.) Mamo gave me a good price for a 102. Worse comes to worse, I can sell it or trade it back to him (he'll sell it as a trade for a used piece. Good a good price, so I won't be taking a hit.) I had to pass on one of his ported 92's a month or so ago at a killer price. I just didn't have the money at the time and of course NOW that I DO have the money, the deals have flat-lined. Just the way ti goes I guess.
And I agree that the LS3 and up are the new crowd, and I would LOVE an LS3, but I can't swing that right now or prolly even this year, so I'm just going to tweak what I have for now. |
Alot of talk for just a stock 346ci build.. LOL
Custom Cam designer must be Patrick. I remember when he knew nothing about Cams..LOL. Nice guy, good sales pitch. Magic Cams ? -no. It's all setup design for power curve. I can get a SV intake to make more power than the LS6/FAST intakes but it is Cam/head combo's that dictate it all. We made 460hp/435tq (peak at 6200rpm)out of a TR224 Cam/ported stock 00 Z heads car on our old dynojet. Alot of detail when putting it together. If you bounce around the net and put parts together more than likely the combo will not be matched and the owner is disapointed. |
^ Agreed. I never asked what heads I should use until recently (never thought of it... Live and learn), but I found a set of P+P'd 243 heads in mint condition apparently done by Wheel 2 Wheel in Detroit on Tech classifieds back in 07 and they were a budget head at the time. Assembled and shipped for $600, IIRC.. Apparently they're not as bad as I thought. I lumped them into the 241 stocker category. They're not top of the line, but they're good for what they are. Someone mentioned to ask your cam designer what they would recommend, so I did.
Ordered the 102 a couple minutes ago and got a good deal on it, shipped. (Sold my camera gear to fund it) I'll prolly get one of the eBay TB's. There have been good reviews on them lately. I've already got the 85mm MAF, all I need now is fuel rails and 42# injectors. Was going to get the LS3 rails as a budget, but we'll see how the prices play out. $130 for LS3 rails, or $150 for the billet budget rails kit from Speedinc. Just going to need the spacers, FPR and lines. And gotta find some damn fernco. And different lid. Was thinking of an SD tune, but being a street car, I don't think it'd be the best idea. |
my car runs GREAT!!!! Speed Density. and really your car is speed density all of them are the maf just cleans it up.
|
| All times are GMT. The time now is 10:52 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.