North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LSX Powertrain (http://www.northeastf-bodyassn.com/forumdisplay.php?f=37)
-   -   Lifters (http://www.northeastf-bodyassn.com/showthread.php?t=1083)

Batman 05-12-2010 05:25 PM

Quote:

Originally Posted by Bayer-Z28 (Post 19277)
^ Another testimonial... :D Did you do an oil pump, though? I had that problem w my buddy's ms4 swap. Check a couple pages back, I posted a link.

He also had like 15 PSI of oil pressure at idle too though, as soon as he goosed the throttle and the Oil pressure went up above 30 his tick would go away. Take it to Don, do it the smart way.

ILuvPizzaTimes10 05-12-2010 05:29 PM

Quote:

Originally Posted by ArcticSS (Post 19281)
Tried to upload a short video but it said upload failed because i am missing a security token and to see the admin. Do i have to buy these tokens? lol
Also tried photobucket but they are too large.Jesus I cant even upload a video.


send the video to my email. ill get it up for you.

mikebas5ett_1970@hotmail.com

as far as oil pump goes. unless its been off and disturbed theres no need to dig into the oil pump. again post up a video and then after we all bicker back and forth AGAIN. get up to Dons shop for bajesus sakessss

Bayer-Z28 05-13-2010 01:15 AM

^ Can we place bets on what we thing the problem is? :D

Batman 05-13-2010 02:26 AM

Without hearing it first hand? not on your life

Bayer-Z28 05-13-2010 02:49 AM

^ I've heard it before. I know what it sounds like. This an't my first rodeo... lol

I went thru this same ordeal on my buddy's 02 SOM SLP SS with his heads and cam swap. Came from the same area, and sounded the same.. Not the sewing machine noise, this sounds like a knock, but it's deceiving because it sounds like it's coming from the collector or the wheel well area. We thought it was the wrong push rod length so we did THREE pushrod changes, and none fixed the knocking. Then we got a push rod length checker and got the right size. We thought it was dead lifters, so we tore the car BACK apart again to replace the lifters. THEN we did the oil pump O-Ring. The O-Ring fixed it.

There wasn't a reputable, local LS* place out west, so most of the people came to me with their problems. = LOTS of research. Had a very mild vibration on a 99TA that was a pain to locate. It only did it at 1400rpm. Was reluctant to make that call with the car having 115k on it.

Batman 05-13-2010 12:32 PM

I will take the bet it isn't the O-ring though. With good oil pressure it can't be. it would either fluctuate or just be low.

Bayer-Z28 05-13-2010 12:40 PM

^ It's something along those lines. Pump or pickup.

ILuvPizzaTimes10 05-13-2010 03:27 PM

^^ i venture to say IF it is a bad lifter. its JUST a bad lifter. the more i think about it. if the oil pressure is good and the oil pump was never fucked with. why would it be the pick up or o ring?

ArcticSS 05-13-2010 05:31 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 19311)
send the video to my email. ill get it up for you.

mikebas5ett_1970@hotmail.com

as far as oil pump goes. unless its been off and disturbed theres no need to dig into the oil pump. again post up a video and then after we all bicker back and forth AGAIN. get up to Dons shop for bajesus sakessss

Video wont do any good because you cant even hear anything over the exhaust. Second not is that it wont upload in my email because it is too large. Its gonna end up having to be in person. But im leaving for florida in 2 weeks so idk.

ILuvPizzaTimes10 05-13-2010 06:03 PM

bring her up to Dons begining of next week.


All times are GMT. The time now is 06:15 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.