North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LSX Powertrain (http://www.northeastf-bodyassn.com/forumdisplay.php?f=37)
-   -   Lifters (http://www.northeastf-bodyassn.com/showthread.php?t=1083)

*LS1* Queen 05-14-2010 12:39 AM

stupid exhausts hahaha...im not guessing cause i havent heard it. lol

Bayer-Z28 05-14-2010 12:57 AM

Quote:

Originally Posted by Batman (Post 19499)
If you can tell which lifter it is without putting a stethescope on it you are a way better man then me.

The lifters for #7 cyl see oil first.. Not sure EXACTLY which one, but I'll guess the Exh lifter for the #7 cyl sees the fresh oil first.

ILuvPizzaTimes10 05-14-2010 12:58 AM

So if they saw oil FIRST.... wouldnt that make it properly oiled. and the lifters that get oiled LAST have a problem?

irockidz28 05-14-2010 12:59 AM

^ that would make sence

Bayer-Z28 05-14-2010 01:08 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 19508)
So if they saw oil FIRST.... wouldnt that make it properly oiled. and the lifters that get oiled LAST have a problem?

READ THIS.. POST 59
http://www.ls1tech.com/forums/genera...preload-3.html
Original thread.
http://www.ls1tech.com/forums/genera...r-preload.html


HOW MANY TIMES DO I HAVE TO EXPLAIN THIS?! If it's a bad O-Ring, the FIRST lifter to see that oil will NOT be pumping up all the way = TICKING!
http://www.ls1tech.com/forums/genera...preload-3.html

NOW I'm getting irritated. I'VE BEEN THRU THIS. My buddy threw $600 in parts in his car chasing this problem when it was a $3 O-Ring.

ILuvPizzaTimes10 05-14-2010 01:19 AM

haha your not making any sense, he CHANGE the cam and Hence had to remove the oil pump? this car has not had the front cover off as far as we know. WHY would it be the oring. again. ill argue this till im blue in the face ask tony. haha. untill we hear it in person. you and i are BOTH wrong.

Bayer-Z28 05-14-2010 01:22 AM

I HAVE HEARD IT.. I know what it sounds like..

Kind of a shitty vid, but this was what we had a problem with.
http://www.youtube.com/watch?v=CfNfdj-wtt8

Ok. If the oil is being aerated, the #7 lifter will not pump up all the way and will be spongy. Like bad brakes. I dunno.. I'm just gonna sit back and wait. Maybe the pump went.

Which would be easier/cheaper? Take the heads off and spend $100+ for gaskets and bolts or take the pulley and WP off to check the pump? Rubber + oil = a sloppy piece of rubber.

What did he replace with the cam? That should be a more accurate question. Did he measure for the correct length pushrods?

I've also heard of something going wrong with the lifter and it chewing up the cam. Just find that #7 thing being a little coincidental.

Navy01z 05-14-2010 01:46 AM

Quote:

Originally Posted by BrokenFeather78 (Post 19491)
Yeah last summer drivers side now pass side. Note to everyone kooks makes awesome headers but don't use their craptastic gaskets!

I didnt. I used gaskets from ThunderRacing. GM gaskets I believe.

ILuvPizzaTimes10 05-14-2010 01:56 AM

Quote:

Originally Posted by Bayer-Z28 (Post 19522)
I HAVE HEARD IT.. I know what it sounds like..

Kind of a shitty vid, but this was what we had a problem with.
http://www.youtube.com/watch?v=CfNfdj-wtt8

Ok. If the oil is being aerated, the #7 lifter will not pump up all the way and will be spongy. Like bad brakes. I dunno.. I'm just gonna sit back and wait. Maybe the pump went.

Which would be easier/cheaper? Take the heads off and spend $100+ for gaskets and bolts or take the pulley and WP off to check the pump? Rubber + oil = a sloppy piece of rubber.

What did he replace with the cam? That should be a more accurate question. Did he measure for the correct length pushrods?

I've also heard of something going wrong with the lifter and it chewing up the cam. Just find that #7 thing being a little coincidental.


hahaha your getting too worked up over this MAN!!!!! its just an online forum. BUT have you heard Arctic SS' car? thats the question? no one else has heard it. i think your getting more worked up then He is hahaha. chillax it will all work out in the end. and hey guess what if your right you get to say i told you so. haha:nanafuck:

Batman 05-14-2010 01:57 AM

I'm just saying how do you know it isn't cylinder #5? I mean I know by ear only I can tell if it is the left or the right side, but the harmonics of an engine won't really let you say it is cylinder 7 on the exhaust side as it bangs away at 800 RPM. And has anyone even heard the car in person yet? I just think that since all of it is untouched and his Oil pressure is good it isn't the pump or the O-ring. But what do I know, not like I ever work on these things.


All times are GMT. The time now is 07:37 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.