North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LT1/TPI/TBI (http://www.northeastf-bodyassn.com/forumdisplay.php?f=36)
-   -   Z won't idle? No codes... (http://www.northeastf-bodyassn.com/showthread.php?t=1633)

bottledbird68 08-24-2010 10:08 PM

Z won't idle? No codes...
 
Ok, haven't even popped the hood yet but I have a few minutes to kill between coats of paint so figured I'd post up.

Hopped in the z to go pick up a couple things. Car ran fine when we parked it a couple days ago. Starts fine, runs ok going down the road, just won't idle on it's own. Idles fine at whatever rpm I keep my foot at though.
It's not throwing any codes. Any ideas? I'll double check the intake track make sure it's tight but beyond that what won't throw a code on an lt1?

Or is the car just jealous I've been spending all my time the past week on her subie and it'll straighten itself out when I start on it in the next couple days lol?

ILuvPizzaTimes10 08-24-2010 10:18 PM

Iac motor died I'm guessing. Computer commands it closed on key. Then opens it on crank. 2 coils do this operation. I bet one has burnt. Or its just getting sticky. Take it off and clean it. Ohh and does your mph follwer work? That's wen you drive down the road and put the clutch in. It should keep a high idle until a complete stop.

My84Z 08-24-2010 10:18 PM

I'd guess vaccum maybe a rip or loose near the tb

bottledbird68 08-24-2010 10:30 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 27740)
Iac motor died I'm guessing. Computer commands it closed on key. Then opens it on crank. 2 coils do this operation. I bet one has burnt. Or its just getting sticky. Take it off and clean it. Ohh and does your mph follwer work? That's wen you drive down the road and put the clutch in. It should keep a high idle until a complete stop.

First time I noticed it was when it stalled going to pull into dunks. Stuffed the clutch at about 30 mph to slow down for the lot and it died.

It almost wants to idle but at just under 500 rpm. Doesn't last long lol. I was thinking vaccum but iac would make sense. Not many vaccum lines on this car.

Formula413 08-24-2010 11:27 PM

Yeah a vacuum leak would usually cause a high idle too. Sure sounds like the IAC, Camrys are notorious for that. Be careful if you clean it, I think I read that they are sensitive to harsh chemicals.

Batman 08-24-2010 11:33 PM

Fuck it, I'm going opti, it's ALWAYS the opti....

bottledbird68 08-24-2010 11:52 PM

Quote:

Originally Posted by Batman (Post 27762)
Fuck it, I'm going opti, it's ALWAYS the opti....

Tell me about it lol. It still throws both opti codes every cold start, done it as long as I've owned it, even with the msd opti. They go away as soon as it gets up to temp though so I gave up and stopped worrying about it.

ILuvPizzaTimes10 08-25-2010 12:24 AM

Low and high res pulse have come up on cold starts from a cam befofe. Not common but it happens. I say vacuum leak would cause high idle. Try it. Pull the brake booster hose off. Fucker will zing right up.

Batman 08-25-2010 12:28 AM

Lol, almost like you are adding unmetered air into the engine......

ILuvPizzaTimes10 08-25-2010 12:34 AM

Ahhhh yupppppp you so smaht


All times are GMT. The time now is 10:34 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.