Intake ideas? MAF Questions too. (again)
It's down to the FAST and Vic Jr now.
Also, what MAF should I run? (Don) From a tuning stand point. I've heard you can go TOO big. If I'm running a 102 TB would a 100mm blade MAF be ok? I would think an 85mm MAF would be a restriction on a 102TB. Anyway.. I was told a Vic Jr is wrong for my cam. Someone mentioned that it performs better with wide overlap cams. Mine only has 5* of overlap. Can I get a 95 or 92mm 120* elbow for the Vic Jr to clear the stock SS hood? |
Victor jr will make less down low but more up high where as the fast will make more mid but less peak and at top.
|
and stock cubes a Vic JR will kill you. Same with a FAST 102, there have been alot of complaints about them. I'd go with a Fast 92/92 and an 85MM Z06 MAF. But DEF I don't think you have anywhere near the cubes to pull off a Vic JR or a 102.
|
I all comes down to the head and cam selection.No wide splits with victor junior intakes. LSA is best at 106-110.
Just did a 01 Z that made 445hp/400tq on my dyno with TFS 215 heads,230 cam,LS6 intake,ported TB,stock MAF, ARH headers and 12 bolt with 4.11 gears. Compare that to your #'s or even Batmans car on my dyno.( I think was 380hp or so). |
393/366 were the dumbers Don. Gonna be seeing u when i get home
|
Quote:
|
lol its what its for Nick
|
Quote:
needs more then tune. |
Quote:
|
mikes car runs we started it at the party :P
|
| All times are GMT. The time now is 10:29 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.