North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LSX Powertrain (http://www.northeastf-bodyassn.com/forumdisplay.php?f=37)
-   -   Lifters (http://www.northeastf-bodyassn.com/showthread.php?t=1083)

ArcticSS 05-05-2010 01:56 PM

Lifters
 
Thought i had a leaky exhaust and header ticking noise from not being tightened again after the breaking in. Turns out i did but the noise did not go away. The mechanic said its prob a lazy lifter coming from the drivers side. Question: Do the heads have to come off when doing lifters in these cars. Havent got a 100% diagnostic test to confirm but i can hear it better since the exhaust was fixed. Maybe thats why i got it pretty cheap. I got no fucking luck buying cars.

ILuvPizzaTimes10 05-05-2010 02:32 PM

the LS car your talking about right? the one you just picked up? you know there is a lemon law. if you cant do it yourself it can be VERY pricy. the heads do have to come off.

ArcticSS 05-05-2010 03:01 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 18445)
the LS car your talking about right? the one you just picked up? you know there is a lemon law. if you cant do it yourself it can be VERY pricy. the heads do have to come off.


Yea it's the LS i just picked up. Lemon law probably wouldnt apply since i bought it as is as seen from a private seller and i also drove an hour and a half into conn. to pick it up. No i prob wont be able to do it myself. I have no space available and probably not all the tools to do it probably. I figured the heads have to come off, just wasnt sure. It's not that bad yet, but it ticks and it echoes down through the bottom of the engine and it's just very annoying. Is there maybe some kind of oil additive i can use the help free a stick or lazy lifter just for now maybe to quiet it down.

I am selling my 94z today so i have a little money coming in today.

c4boom 05-05-2010 03:47 PM

do an oil change with a synthetic oil and at the same time get some gunk engine flush FOLLOW THE DIRECTIONS DO NOT DRIVE THE CAR WITH THAT SHIT IN THERE. or you can add some ATF to the oil. What you need is some thing that will get all the shit out of the lifter ports allot of times.

ArcticSS 05-06-2010 12:30 AM

Quote:

Originally Posted by c4boom (Post 18448)
do an oil change with a synthetic oil and at the same time get some gunk engine flush FOLLOW THE DIRECTIONS DO NOT DRIVE THE CAR WITH THAT SHIT IN THERE. or you can add some ATF to the oil. What you need is some thing that will get all the shit out of the lifter ports allot of times.

The guy i bought it from always runs mobil 5w-30. I havent changed the oil yet but i will this weekend. Should i go with a heavier synthetic and do maybe 10w-30. Ive never done seafoam will that work?. Ill add some atf when i change it later this week.

BrokenFeather78 05-06-2010 12:42 AM

Quote:

Originally Posted by ArcticSS (Post 18477)
The guy i bought it from always runs mobil 5w-30. I havent changed the oil yet but i will this weekend. Should i go with a heavier synthetic and do maybe 10w-30. Ive never done seafoam will that work?. Ill add some atf when i change it later this week.

Plan on a quick swap if you're using atf. It has a good chance of clearing up your problem. The best way to do it is after the add drive for a couple of hours. Then rechange your oil while it the atf batch is still hot. If you let it cool before the change the conditioners will release some of the crap you just stripped and will cake in your pan. I have done it a couple times with success.

ArcticSS 05-06-2010 01:43 AM

Quote:

Originally Posted by BrokenFeather78 (Post 18479)
Plan on a quick swap if you're using atf. It has a good chance of clearing up your problem. The best way to do it is after the add drive for a couple of hours. Then rechange your oil while it the atf batch is still hot. If you let it cool before the change the conditioners will release some of the crap you just stripped and will cake in your pan. I have done it a couple times with success.


I will try that this weekend. Should i just stick with the mobil 5w-30 or go to 10w?

BrokenFeather78 05-06-2010 01:47 AM

5w and 10w isn't too much of a difference during normal summer driving. I use 10w. The snailblazer gets 5w as a winter driver. But it may be going away for a 2500HD.

Batman 05-06-2010 11:55 AM

ATF is probably your best shot to free it up but the problem normally is the retainer gets small scratches in it from the dirt and that is what holds the lifter for a second. Worth a shot though. If you do need to change them in can be done in a day but gets pricey for the gaskets and you can't re-use alot of the bolts.

ArcticSS 05-06-2010 03:37 PM

Quote:

Originally Posted by Batman (Post 18556)
ATF is probably your best shot to free it up but the problem normally is the retainer gets small scratches in it from the dirt and that is what holds the lifter for a second. Worth a shot though. If you do need to change them in can be done in a day but gets pricey for the gaskets and you can't re-use alot of the bolts.

Yea and it only sounds like its coming from the drivers side. If it does have to come at least im getting a new head gasket. Btw how much are they anyway, i have no idea what parts i would need. Right now its only mildly ticking. But my 94z i just sold yesterday has been ticking since the first time i got i bought it 3 years ago. I say the dude got a very good deal since he only paid 2600 for it and he got my c6 vette wheels since i had no other rims for the car.

Batman 05-06-2010 07:46 PM

head gaskets are cheap but all the head bolts are torque to yield and will need to be replaced. Probably looking at $75-$100 for all the odds and ends

monytorris 05-07-2010 04:28 AM

Derrick get some new heads! Oh and I saw your 95 this morning on airport road, new owner seems to think that he is faster than me. I watched him go flying down airport road and continued doing 45.

Bayer-Z28 05-07-2010 12:50 PM

Did you fix this yet? The cheap fix would probably be the oil pump pick up tube O-Ring. Had the same EXACT problem on my buddy's car and we spent over a MONTH trying to figure it out. The X7 lefter is the first to get oil. If the o-ring is bad, then that #7 (driver's side, last cyl back) lifter is not getting sufficient oil = ticking. We EVEN installed brand new LS7 lifters and it still ticked.
Thicker oil pump o-ring GM# 12557752

http://www.ls1tech.com/forums/genera...r-preload.html

Watch his oil pressure boppin around. You can kinda hear it tickin like crazy.

ArcticSS 05-07-2010 01:42 PM

Quote:

Originally Posted by Bayer-Z28 (Post 18661)
Did you fix this yet? The cheap fix would probably be the oil pump pick up tube O-Ring. Had the same EXACT problem on my buddy's car and we spent over a MONTH trying to figure it out. The X7 lefter is the first to get oil. If the o-ring is bad, then that #7 (driver's side, last cyl back) lifter is not getting sufficient oil = ticking. We EVEN installed brand new LS7 lifters and it still ticked.
Thicker oil pump o-ring GM# 12557752

http://www.ls1tech.com/forums/genera...r-preload.html

Watch his oil pressure boppin around. You can kinda hear it tickin like crazy.


No i havent fixed it yet. Gonna change the oil tomorrow and maybe try the atf stuff. I couldnt really hear the ticking on my speakers. The exhaust just drowned everything out. But that could be it because it is on the drivers side and sounds like its coming from the very back one.

Yea tony that guy is a little weird. He was annoying the crap out of me so bad i ended up leaving a bill of sale with my father and he gave the rest of the money to him. He's been texting me all day yesterday and this morning asking me how to fix the window motors and other shit.

ILuvPizzaTimes10 05-07-2010 06:31 PM

is your oil pressure bouncing around? if its below 45 at idle it will tick. ask navy allll about that one. haha. id say if the oil pressure is low i wouldnt add ATF. id look deeper into the oil pump and pick up tube assembly

irockidz28 05-07-2010 06:32 PM

Quote:

Originally Posted by monytorris (Post 18647)
Derrick get some new heads! Oh and I saw your 95 this morning on airport road, new owner seems to think that he is faster than me. I watched him go flying down airport road and continued doing 45.

airport road? as in Warwick?

Bayer-Z28 05-08-2010 04:30 AM

Here's a good ticking video.. kind of.. Sounded like it was coming from the collector area, that's what was so deceiving about it. .

I'd almost put money on it that it's the pick up tube O-Ring.. I'm that certain.. I've been thru this.. You're about to go thru it too.. Read thru that thread on tech.. it took a SOLID MONTH of throwing parts at the fukin car to FINALLY get it.. was that damn $3 O-Ring. If I'm still around when you do it, get the water pump off and I'll do the oil pump for ya. I've got the tricks to do it without dropping the oil pan. (skinny fingahs and a "Custom 10mm wrench.. lol )
I bought two of those O-Rings. one for the install, and a second for insurance. Sorry, I meant the #7 cyl lifters are the first to get oil, the last one in line on the driver's side. It's something to do with the ported oil pumps. Or else your o-ring got pinched somehow, or blown out or god knows what. I'd replace the oil pump while you're in there. What year was the car/engine again?


ArcticSS 05-08-2010 05:01 AM

Im not sure when im gonna do it. It would be great that i wouldnt have to drop the oil pan since i just had everything welded under there. Gonna try and change the oil tomorrow if it doesnt rain. It's a 2000 z28 for reminders. Video doesnt do justice. Mine is a little more noticable. But thats exactly where the noise is coming from.

ArcticSS 05-08-2010 05:05 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 18673)
is your oil pressure bouncing around? if its below 45 at idle it will tick. ask navy allll about that one. haha. id say if the oil pressure is low i wouldnt add ATF. id look deeper into the oil pump and pick up tube assembly

Yea at idle its around 42. But when i just left work sitting idle at a stop light it was at 40 but not really moving around until i took off. So the pressure is a little low.

*LS1* Queen 05-08-2010 06:14 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 18673)
is your oil pressure bouncing around? if its below 45 at idle it will tick. ask navy allll about that one. haha. id say if the oil pressure is low i wouldnt add ATF. id look deeper into the oil pump and pick up tube assembly

this is a good point lol..could def be something simple as the o ring issue

Batman 05-08-2010 01:48 PM

If you go into the oil pump to do the O-ring get a ported pump and an LS2 timing chain while you are in there, money in the bank for the future. But if your oil pressure isn't dropping I'll tell you now it isn't the pump or O-ring. Navy's issue was different as his Oil pressure was getting down between 15 and 20 PSI at idle. If you are sitting at 35-40 PSI at idle the oil pump is fine. You can't have a lifter knocking from starvation if the car has good oil pressure.

Bayer-Z28 05-08-2010 01:58 PM

^ If it JUST happens to be the lifters, the LS7 lifters are the direct LS1 replacements and are off the shelf Comp Cams units. If the oil pressure is good, that is a valid point. My buddy's oil pressure was good, but dropped every once in a while. The o-ring wasn't pinched, just wasn't seated good enough in the pump.

IMO, I'd rather do the oil pump first. Easier than taking the heads off.

The O-ring problem we had wasn't starvation, it was aeration.

c4boom 05-08-2010 03:28 PM

ya that or just get a the caddy racing lifters

ArcticSS 05-08-2010 05:37 PM

Well it looks like a i cant change my oil today because of the shit storm outside and i gotta work all day mothers day.

ArcticSS 05-08-2010 07:47 PM

Quote:

Originally Posted by irockidz28 (Post 18674)
airport road? as in Warwick?

Yeah in warwick. Dude lives in bayside so if you see a green 4th gen with c6 wheels please give him the finger.

ILuvPizzaTimes10 05-08-2010 07:48 PM

id start with looking at pump. and then go from there. 40 by the stock gauge my even be lower then you think. i dunno ive never seen a lifter go bad from nothing. yah know. something HAD to have casued it.

smokinss 05-09-2010 01:02 PM

Yeah it could be the pump.

But as far as taking the heads off. I just went through that whole ordeal because I thought I had a bad lifter or worse. I stripped down the whole topend and bought new GM MLS head gaskets and new GM bolts. It wasnt that bad of a job, I did it all myself with hand tools none the less. As long as you follow the correct tq patterns for the heads and rockers you should be just fine.

This is with the passenger side head off. I did do the other side too.
http://i56.photobucket.com/albums/g1...aro00/head.jpg

Bayer-Z28 05-09-2010 05:26 PM

^ Yeah, it's doable with basic tools. We did my buddy's MS4 h/c swap with one of those black plastic case tool kits. We went thru a couple things, and had to rent/borrow some stuff, but it worked out great. I got the Cometic head gaskets. I didn't need em, but I actually like the stock MLS gaskets.

People bitch about working on these cars "Woah! HTF do you get in there!? I can't see the back of the engine!" when in reality, once you get the intake out of there and avoid slicing the top of your hands, it's really not that bad. But I did have an issue on my buddy's car with the second head bolt from the front on the bottom/driver's side was a real pain on my buddy's car with his welded exhaust. And even THAT wasn't that bad. Depends on your abilities, though. I've been wrenching since I can remember.

HE bled worse than I did though.. :haha: He caught his hand GOOD on the raw edge of the rocker area on his new heads.

This was the head bolt.. Not SPECIFICALLY, but I can't find a pic of the driver's side during the swap.. This pic is my car, tho. That head bolt was a pain on mine too, come to think of it. Just in a bad spot. Got the header flange in the way and a really tight squeeze with the 15mm socket and 1/2" drive and all.
http://img69.imageshack.us/img69/5176/carhead.jpg

Batman 05-09-2010 09:39 PM

Yupp,once the coils and intake are gone it is a piece of cake to work on these engines. That and getting the crank pulley off, have fun with that

Bayer-Z28 05-09-2010 10:43 PM

^ A good puller helps with that.. I've got an EXTRA strong 2 jaw puller that seems to work pretty good.

I can't find the brand or even a pic of mine, but I'm pretty sure I bought it at NAPA. It's REALLY heavy duty! Prolly around 1/4" plate steel hooks and center support. Here, I'll show off my sIk mSPaint SkillllllzzZ! :D
http://img297.imageshack.us/img297/3939/puller.jpg

Batman 05-09-2010 11:28 PM

Yeah I have a Posi lock puller that works great, the issue is normally the bolt

Slowhawk 05-09-2010 11:32 PM

You guy's are jumping to quick.

Do the oil change - I run 40weight in all my cars ie -0w-40,10w-40

Then have someone that knows these engines look it over.You could piss alot of money away throwing parts at it.

ArcticSS 05-09-2010 11:50 PM

Quote:

Originally Posted by Slowhawk (Post 18949)
You guy's are jumping to quick.

Do the oil change - I run 40weight in all my cars ie -0w-40,10w-40

Then have someone that knows these engines look it over.You could piss alot of money away throwing parts at it.


So it wouldnt do any harm running from Mobil 1 5w-30 to 10w-40?

Batman 05-09-2010 11:53 PM

No it wouldn't hurt it at all, I run 10W-40 in mine

Bayer-Z28 05-10-2010 03:00 AM

Quote:

Originally Posted by Slowhawk (Post 18949)
You guy's are jumping to quick.

Do the oil change - I run 40weight in all my cars ie -0w-40,10w-40

Then have someone that knows these engines look it over.You could piss alot of money away throwing parts at it.


I'm still saying it's the Oil pump O-Ring. Been thru it already. But I think we'll just have to wait and see..

Batman 05-10-2010 10:58 AM

Quote:

Originally Posted by Slowhawk (Post 18949)

Then have someone that knows these engines look it over.You could piss alot of money away throwing parts at it.

Yeah ask Navy.....dumbass

ArcticSS 05-10-2010 12:34 PM

Yeah i wish i knew someone who was closer because everyone else if pretty far away. I did know a shop around west warwick but they lost almost everything in that flood.

ILuvPizzaTimes10 05-10-2010 03:16 PM

how far away are you from bridewater? cant be THAT far and if its only a lifter tap you aint gunna hurt nuthin driving it to Dons.

ArcticSS 05-10-2010 03:21 PM

Im like an hour and 15 min from Don. I would need a ride back also if i have to leave it with him too.

ILuvPizzaTimes10 05-10-2010 03:25 PM

i mean thats something you figure out after you know what it is. wen to drop it off i mean. give him a call. if yah need a ride back one morning gimme a call as long as its before 11ish i can swing by and bring your carless ass home!


All times are GMT. The time now is 05:35 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.