Slicks or DR tire size
So if I wanted to put slicks or DR's on my car to help me out at the track, what sizes (bare minumum to maximum) should I be looking for?
The car as 17's now. |
what are the rear rim specs I always liked the look of the 295 45 17 but it will piss the abs off
hear is a pic that i swiped from LS1 tech http://img.photobucket.com/albums/v2...aaae754d61.jpg |
get some et streets like someone else sold you lol 26x10.5x 16 however if you want to put something on what you have you can get the 275 mt et street radial or some nitto's. However I would get some 16 inch stockers and put some etstreets on there or get some 15" prostars or drag rims and get the same thing just in a 15 inch size.
|
So would these work: http://boston.craigslist.org/nos/pts/1433247532.html
Just looking to help the 60' not do any earth shattering times the few times I plan on racing it. Or how about 30x10.5x15? And yeah, I remember those. Now who did I sell them to after I totaled my car? |
those are alittle skinny seems like mustang tires to me. you don't wannt go bigger then a 26 tall or else it will lower your gear ratio. I would also stick with atleast stock size tire just in a drag radial. Nitto's can be driven on all the time the mt's not so much
|
I'm going to Cecil Nov 14th with my turbo mopar pals.
The track is rented (i.e., closed, only 200 cars for the day) with some Mustang guys & I just want to run some decent times with 2.0 or so 60's not the 2.3-4's I run now. |
they will work but are a bit narrow and that is a mustang rim fox body i think. also if you dont want a taller tire i would go with a 274 40/75 in a micky or 305 in a nitto if you have the rims for it.
|
Quote:
|
30" tall et streets are pretty serious tires. I doubt anyone here is pushing enough power to really easily blow those things off. I would rather have a tall tire with a lot of sidewall than a wide tire for more traction. I run 27x10.5 Et streets and would go taller if I could fit it. I would find out what fits first then go to the track see what you run and then go to
www.f-body.org/gears and find out what heigh tire you would run which would allow you to finnish the end of the quarter right before shifting into OD. |
Yeah but skiff if he goes taller then 26" he will lose gearing and with a heavier car like his he needs the gear to get rolling. Now that you say you only want 2.0's butch just get some nitto's or something et streets will be overkill if that is all you are looking for.
|
Thansk for all your help guys.
I'm just looking for the size I can use, nothing fancy, I can match up the sizes metioned with what I see on CL. I'm not looking to spend large cash, just looking to not spin em as much & with my crappy driving, I'm looking for 2.0's where others would look for 1.8's! I'm not looking for anew all around tire or anything like that. On at the track, off before leaving. |
Hey do you want to use my Nittos? come take em off my car and use them if you like them buy a set. if not you didnt waist 120 bux a tire. they are 245/50-16 on ABS T/A wheels. up to you lemme know.
|
Well if he has a 10 bolt. drag radials are harder on the rear end than et streets. Good chance of breakin it launchin at the track, and if he doesnt launch hes still not gonna get 2.0s no matter what tires hes running, unless he's got enough power to just launch off idle and pull sub 2.0 60's
Using 555Rs I had like 2.3 2.2 60's wheel hopping hard and that was with me staying in it. |
Quote:
|
Quote:
|
The car is fairly stock so you don't have to over tire it.I forget if it's a M6 or auto but for a M6 use 10.5/26/16's on stock 16' wheels.For an auto just run 315/35/17's all the time.I run these for the street and still got 1.52 60's at the track.
|
I have an auto & at Camaro/F-bird day I was in the 2.3-4 range due to wheel spin, so any sticky tire will net a better launch, esp with my stock engine.
|
Sorry just didnt think that you had an auto for some reason. The Nittos should be fine. I think the auto cars can get better use of the radials and are easier on the rear end.
Nittos are also good street tires. When I lived Down in FL most every one I knew drove drag radials year round with no problem and the nittos last the longest |
I'm going to take up Pizza's borrow offer since I'll probably get 4 runs in max & in return I'm going to cut him a deal on the SFC's he wants to buy from me.
|
Quote:
|
Yes Sir that is!! Glad to help out i know i wont use em!! and do a HAIRYYY burn out with em first get em REALLY hot i havent done that with em yet. and they need it.
|
Quote:
|
Quote:
|
Not the LT1 thats were it has all of its power. its got NOTHING up top. haha
|
hahaha it wont bog. it has SOME power lol
make sure u smoke em real good and get them hot. dont be afraid of it. if u dont get them hot enough they will be uneffective. |
I dont know what the stock stall is but I bog hard out of the hole with my m6 and I'm launching at 4500rpm dumping the clutch with 4.10 gears and a car thats about 800lbs lighter.
|
You have a ls1..... totoally different car motor trans etc...... :facepalm: also you are hooking but dropping the clutch if you slipped the clutch it wouldn't bog or if you had a converter to slip it wouldn't bog either.....
|
:qft:
|
What's QFT?
|
quite fucking true
|
quoted for truth
|
I'm using 275/40/17's giving me almost 11 in foot print. 2002 SS rims 17x9, 25.6 tall. I would think any name brand drag radial Nitto, Goodrich, Micky Thompson would do the trick. Trust me you don't want to use slicks with a stocker 10 bolt.
|
Well Butch picked up the Nittos tonight. WISH HIM LUCK!!!
|
where the hell is he going to use them ??????
|
Quote:
|
didnt know that you where going to run with the mopars
|
wow you need the driver mod worse than me LOL i pulled 2.3's on a slick ass track with my LS
|
Not just Mopars, but hanging with Mopar pals: http://www.superstallions.com/racing/default.aspx
It's closed track day with only 185 tickets sold for the event so we should get more than 4 runs in. |
for track only tires go with hoosier DOT quick time pros, they stick
|
Let us know how those Nittos worked out!!!! and you had fucking better post up some times!!!!!
|
| All times are GMT. The time now is 09:10 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.