North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Pictures/Videos (http://www.northeastf-bodyassn.com/forumdisplay.php?f=12)
-   -   It's home (http://www.northeastf-bodyassn.com/showthread.php?t=1904)

bottledbird68 10-29-2010 06:22 PM

It's home
 
Just getting anxious. Finally touched my baby for the first time in about a year and a half. Loaded it up and brought it home from my parents. Hopefully start tearing into the rebirth in the next few months.
That's all, no real news, just excited and bored so thought I'd post:
http://i641.photobucket.com/albums/u...8/c7ddd86b.jpg

84ta406 10-29-2010 06:25 PM

I've always loved that car! You know we could put a SBC in it...

Any pics of the motor carnage?

bottledbird68 10-29-2010 06:32 PM

Quote:

Originally Posted by 84ta406 (Post 31636)
I've always loved that car! You know we could put a SBC in it...

Any pics of the motor carnage?

Fuck no. No old school small block in my classic Pontiac lol. It's actually taken me lots of long hard soul searching to decide to switch to ls power. The benefits are just too hard to ignore.

No pics but the whole top end of the motor is off. Next time I'm downstairs I'll pop the hood and snap a couple if I think of it.
Snapped two rods, blew out both sides of the oil pan, and windowed the block really good. The pan was so bowed out I couldn't squeeze the starter out past the headers anymore lol.

84ta406 10-29-2010 06:41 PM

Yeah I was there when the motor quit. Poor thing lol

Cant wait to see it finished though..

CamaroRacing12 10-29-2010 06:47 PM

is that all rubber out back?

bottledbird68 10-29-2010 07:13 PM

Quote:

Originally Posted by CamaroRacing12 (Post 31642)
is that all rubber out back?

Yes :)

You should see inside the wheelwells. There's 15 years of summernationals rubber in them. Never bothered to clean it out. It's easily over an inch thick in some places lol.

I don't baby anything I own.

bottledbird68 10-29-2010 07:16 PM

After double checking the pic the line from the quarter window to the wheelwell is dirt from sitting, but yes, everything else is rubber lol.

frankzlt1 10-29-2010 09:27 PM

what are you going to put in for a power plant.

bottledbird68 10-30-2010 12:15 AM

Quote:

Originally Posted by frankzlt1 (Post 31651)
what are you going to put in for a power plant.

Some sort of ls motor. Was originally going with a 6.0 but after pricing all the vette bits to make one go into the vette chassis this car is getting I may just buy another vette that got obliterated just for the motor and a few other bits I need.
Car is getting a complete restoration. Gutting the whole thing and starting fresh. Needs a lot, but I've owned the car for 17 years and it deserves it. We've been through a lot together :)

ls6monte 10-30-2010 12:58 AM

It's been a while since i've seen that car! The rear quarters kind of look like mine do at the moment! lol

frankzlt1 10-30-2010 01:27 AM

No more pontiac motors. How many have you destroyed threw the years. The only thing about a pontiac motor is lots of torque, heavy motor.

bottledbird68 10-30-2010 01:49 AM

I don't think I was doing too bad. This was only motor number 4 in 15 years.
Course it was also the first one that I fully built with everything. 600 horse pump gas motor. That day was a $10,000 burnout lol.

TBerry95z28 10-30-2010 05:22 PM

Quote:

Originally Posted by bottledbird68 (Post 31675)
I don't think I was doing too bad. This was only motor number 4 in 15 years.
Course it was also the first one that I fully built with everything. 600 horse pump gas motor. That day was a $10,000 burnout lol.

sounds like one hell of a burnout.

ls6monte 10-30-2010 05:44 PM

Quote:

Originally Posted by TBerry95z28 (Post 31701)
sounds like one hell of a burnout.

If Matt is doing it, it usually is! lol

bottledbird68 10-30-2010 06:14 PM

Quote:

Originally Posted by ls6monte (Post 31703)
If Matt is doing it, it usually is! lol

Thank you Ron lol.

Yeah, I had been doing the summernationals burnouts for so long that I pretty much could do whatever I want. 90% of the time they ended with both tires completely blown out and the car sitting on the rims :)

This last one cost me a motor though ;)

CamaroRacing12 10-31-2010 12:43 AM

Yea the rubber on the fenders def has to stay. Battle scars!

bottledbird68 10-31-2010 01:09 AM

Quote:

Originally Posted by CamaroRacing12 (Post 31715)
Yea the rubber on the fenders def has to stay. Battle scars!

If I wasn't putting new quarter panels on it I most likely would leave it. Helps hide where the steel belts caved it in when the tires blow apart lol.

DAWG 10-31-2010 12:13 PM

thats gonna definately be a nice firebird once its completed.
clean up the rubber though, there will be more room for new rubber later.

bottledbird68 10-31-2010 07:51 PM

Quote:

Originally Posted by DAWG (Post 31724)
thats gonna definately be a nice firebird once its completed.
clean up the rubber though, there will be more room for new rubber later.

Oh don't worry, I'll definitely be giving it a fresh coat as soon as it's all done :)


All times are GMT. The time now is 03:13 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.