North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   Clutch Issue? (http://www.northeastf-bodyassn.com/showthread.php?t=1906)

VinnyDz28 10-30-2010 02:28 AM

Clutch Issue?
 
I was driving my car yesterday and everything was fine. All of a sudden I put the car in neutral and coasted to a stop at a light. Then when the light turned green, I attempted to put the car in gear and it wouldn't go into ANY gear. So I forced it into gear and took off and the clutch chattered like a mofo, then after that it drove perfectly normal again. Got home, checked the clutch fluid reservoir and it was brown. Took it for a test drive a little later and it drove perfectly fine, then as soon as I got home and tried to back into my driveway, it wouldn't go in reverse or any other gear again. What's going on????

My84Z 10-30-2010 02:41 AM

could be the master or the slave but sounds like a definate hydraulic issue

VinnyDz28 10-30-2010 02:52 AM

Quote:

Originally Posted by My84Z (Post 31679)
could be the master or the slave but sounds like a definate hydraulic issue

There are no leaks whatsoever though. I'm wondering if I should just bleed it out and put new fluid in and see if that fixes it?

My84Z 10-30-2010 03:22 AM

Can't hurt i guess but i am gonna guess and say the master is shitting itself and not creating pressure sometimes

VinnyDz28 10-30-2010 03:34 AM

Quote:

Originally Posted by My84Z (Post 31681)
Can't hurt i guess but i am gonna guess and say the master is shitting itself and not creating pressure sometimes

yeah that makes sense. I'll try the cheapest and easiest thing first lol then if that doesn't work it looks like I'm doing a clutch job!

smokinss 10-30-2010 04:01 AM

Well you can try new fluid, but if the master is bad you dont have to do a clutch job. You can replace the master in a few hours usually. But it def sounds like the slave isnt releasing for whatever the reason is.

DemonWithin99 10-30-2010 08:25 AM

my bro just had the same issue. ended up going all in on a new master, slave, clutch...
start with the fluid, but most likely culprit is the master IMO. stock one's are known to have a problem.

Batman 10-30-2010 12:20 PM

An Achilles heel on these cars is the slave cylinder, it is a very common failure. Does the clutch pedal have any resistance or is it just going to the floor? I'd slide under the car and look at the opening in the bottom of the bellhousing for fluid, stick a piece of paper in there if you have to see if it comes out wet.

bowtie17 10-30-2010 05:28 PM

.

irockidz28 10-30-2010 08:46 PM

i would probably put money on the slave cylinder

VinnyDz28 10-31-2010 03:58 PM

Thanks everyone for your input! That's a really helpful video too. I did changed the fluid yesterday and it's still clear so that's a good sign. My clutch still feels funny though.

KLAB 11-01-2010 06:47 PM

Step into the 21st century and get an auto and be happy :D stupid old technology... :P :klab:

Slowhawk 11-01-2010 09:12 PM

The root cause is ussually the clutch.This is why we always upgrade to a better clutch and bleed the system.

VinnyDz28 11-02-2010 02:18 AM

Quote:

Originally Posted by Slowhawk (Post 31771)
The root cause is ussually the clutch.This is why we always upgrade to a better clutch and bleed the system.

Yeah I might just go either stage 2 or 3 with the master and slave.

NO THANKS Kevin! haha

Slowhawk 11-02-2010 08:06 PM

Wasn't your car that ran real lean on our dyno?

If it is a tune would be nice after the clutch so you don't blow your shit up.

VinnyDz28 11-02-2010 08:35 PM

Quote:

Originally Posted by Slowhawk (Post 31826)
Wasn't your car that ran real lean on our dyno?

If it is a tune would be nice after the clutch so you don't blow your shit up.

Yep, that was it. Oh I DEFINITELY planned on getting it tuned by you I just gotta come up with the money.

Slowhawk 11-03-2010 03:45 AM

Quote:

Originally Posted by VinnyDz28 (Post 31827)
Yep, that was it. Oh I DEFINITELY planned on getting it tuned by you I just gotta come up with the money.

Sell the amps,stereo ect... LOL Does no good if the motor is seized.... LOL

Just messing with ya.

VinnyDz28 11-03-2010 07:48 PM

Quote:

Originally Posted by Slowhawk (Post 31849)
Sell the amps,stereo ect... LOL Does no good if the motor is seized.... LOL

Just messing with ya.

Hell no! haha I have a set of Gunmetal Grey C5 Z06 wheels I'm trying to sell though that should cover it

TBerry95z28 11-03-2010 09:01 PM

hey vinny i think i know someone that would buy those rims. how much you lookin for?

VinnyDz28 11-04-2010 06:46 PM

Quote:

Originally Posted by TBerry95z28 (Post 31866)
hey vinny i think i know someone that would buy those rims. how much you lookin for?

that would be great! im looking for $400 just gotta get rid of the damn things lol. they're all mint. only problem is that 2 are missing center caps and one of the front wheels isn't Gunmetal Grey, it's just silver but it could be painted if you can get the right color lol. kinda sucks but still a sweet set of rims


All times are GMT. The time now is 10:01 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.