North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Suspension (http://www.northeastf-bodyassn.com/forumdisplay.php?f=25)
-   -   performance oem brake replacments (http://www.northeastf-bodyassn.com/showthread.php?t=2168)

CJaguar265 01-07-2011 10:50 AM

performance oem brake replacments
 
hi i need to do pads and rotors in the spring

what kind of performance pads and rotors, do you guys recommend?

i am thinking about EBS or Satisfied brake pads.

ILuvPizzaTimes10 01-07-2011 02:38 PM

want the car to stop better? get a 1LE front brake setup and ive found it doesnt matter what brake pads you get they all dust up and they all dont perform as well as they say. get advance cheap semi metallic pads. and besides the softer the pad the less they chew the rotor and you can most likely just get pads on your next brake job.

DemonWithin99 01-07-2011 05:36 PM

ebc, or hawk performance.

84ta406 01-07-2011 05:52 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 35744)
want the car to stop better? get a 1LE front brake setup and ive found it doesnt matter what brake pads you get they all dust up and they all dont perform as well as they say. get advance cheap semi metallic pads. and besides the softer the pad the less they chew the rotor and you can most likely just get pads on your next brake job.

Agreed for the most part. I run the cheap stuff on everything. Dont bother with anything fancy out back especially. You probably have the junk iron calipers too.

Formula413 01-07-2011 09:48 PM

I have Duralast rotors and Hawk HPS pads all around and they work great.

ILuvPizzaTimes10 01-07-2011 10:12 PM

So tell me guys do you honestly think waisting your money on pads that will Most asuridly wear out. There worth the extra cost? I have never seen one benifit of one pad to another and I've installed pretty much every pad there is. Prove to me the "name brand" is worth it for a street car.

Formula413 01-07-2011 10:33 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 35791)
So tell me guys do you honestly think waisting your money on pads that will Most asuridly wear out. There worth the extra cost? I have never seen one benifit of one pad to another and I've installed pretty much every pad there is. Prove to me the "name brand" is worth it for a street car.

HPS pads are definitely not a "waist" of money. More importantly they are not a "waste" of money either. The car had GM rotors and some sort of generic pads on it when I bought it, and the brake performance with the setup I have now is MUCH better. And even though they will "asuridly" wear faster I think the "benifit" of increased performance is worth it, as could be said of, for example, drag radials. So I can tell you most assuredly that there is a benefit.
:shakin: http://www.ls1tech.com/forums/images/smilies2/kiss.gif

ILuvPizzaTimes10 01-07-2011 11:20 PM

PYou also changed/bled your rear brakes and some other misc shit aid to better braking that pads aren't a a factor for. Say grease on caliper pins etc. So apples for apples and a new brake setup with off shelf pads vs. Brand name ebc hawk etc. Will not show a fuck bit of difference in normal braking/driving conditions. Waiste your money think your getting better shit but if you don't use your brakes hardddd like auto-x hard you will not see shit bit of a difference. Just my 2 cents.

P.s. drag radilas vs. M/s all seasons(if that's what you meant) is a pretty lame comparo on your part.

ILuvPizzaTimes10 01-07-2011 11:20 PM

PYou also changed/bled your rear brakes and some other misc shit aid to better braking that pads aren't a a factor for. Say grease on caliper pins etc. So apples for apples and a new brake setup with off shelf pads vs. Brand name ebc hawk etc. Will not show a fuck bit of difference in normal braking/driving conditions. Waiste your money think your getting better shit but if you don't use your brakes hardddd like auto-x hard you will not see shit bit of a difference. Just my 2 cents.

P.s. drag radilas vs. M/s all seasons(if that's what you meant) is a pretty lame comparo on your part.

My84Z 01-07-2011 11:24 PM

Call the knight foundation and ask what kitt has or don't show your face here again!

Formula413 01-07-2011 11:28 PM

I didn't change anything else, I didn't even take the slide pins out. And I didn't get a high performance car for "normal driving", which is why I want all the braking power I can get.

And are you seriously saying there's no difference between DRs and all season tires? I gained .2 at the track just by switching to DRs, and have traction on the street all the time, VS the car going sideways with 2/3 throttle.

So :moon: :p

CJaguar265 01-07-2011 11:42 PM

i want to keep the stock 15 inch set up and just go oem performance upgrade for now


some time in the future i might go with Baer's brake kit upgrade

http://www.baer.com/products/complete/sport.php


http://www.baer.com/products/complet...ous-street.php

CJaguar265 01-07-2011 11:45 PM

Quote:

Originally Posted by My84Z (Post 35815)
Call the knight foundation and ask what kitt has or don't show your face here again!

KITT had

Electromagnetic hyper-vacuum disc brakes: 14 foot (4.25 m) braking distance (70–0 mph - 112–0 km/h).

Formula413 01-07-2011 11:48 PM

Quote:

Originally Posted by My84Z (Post 35815)
Call the knight foundation and ask what kitt has or don't show your face here again!

Quote:

Originally Posted by CJaguar265 (Post 35820)
KITT had

Electromagnetic hyper-vacuum disc brakes: 14 foot (4.25 m) braking distance (70–0 mph - 112–0 km/h).

LOL You got told son!!!

ILuvPizzaTimes10 01-08-2011 12:05 AM

Quote:

Originally Posted by Formula413 (Post 35817)
I didn't change anything else, I didn't even take the slide pins out. And I didn't get a high performance car for "normal driving", which is why I want all the braking power I can get.

And are you seriously saying there's no difference between DRs and all season tires? I gained .2 at the track just by switching to DRs, and have traction on the street all the time, VS the car going sideways with 2/3 throttle.

So :moon: :p


No what i meant was you cant compare brake pads as if you were comparing tires. Not even close to the same effect on handling. ive gone threw probably 5 different sets of pads on the LT1 brakes in the T/A. i now have an LS1 brake swap. and NOthing comes Close. i noticed little to no difference in pad quality/stopping power. wen all else was equal. all im saying is pads on a stock Puny rotor wont net you any better stopping power. 20 bux sez take a car with the same curb weight and brakes sizing. use EBC's in one and cheap ass advance wearevers. bet you dont see any significant drop in 60-0 times.

CJaguar265 01-08-2011 12:08 AM

back to topic

what do you recomend for rotors ?

What style EBS pads or rotors do you recomend?

Pizza what stock parts do you recommend?

ILuvPizzaTimes10 01-08-2011 12:46 AM

i am on topic FOOL! im telling you just goto advance and get there wearever rotors and pads. or goto Auto Zone and get there Duralast. or any parts store and get there pads and rotors. spending the money on shit thats gunna wear out in under 30k doesnt make any sence wen it costs more and doesnt perform any better then stock replacement stuff.

My84Z 01-08-2011 12:55 AM

Like i saiddo it like knight or not at all




Anyways on a serious note the car isn't fast enough to warrant anything special so ebc hawk or any regular brand like pizza said will be fine maybe slight differences but not enough to warrant a big $ difference so see what u can get a deal on






Also if you knew that off the top of your head you need to spend the money on a shrink not pads

Formula413 01-08-2011 12:57 AM

Quote:

Originally Posted by CJaguar265 (Post 35824)
back to topic

what do you recomend for rotors ?

What style EBS pads or rotors do you recomend?

Pizza what stock parts do you recommend?

Personally I think Duralast rotors are a great choice. They seem to have very good resistance to warping, based on my experience in my Escort. Price is reasonable, 2 year warranty. They seem to do pretty well in performance applications as well, even some autocrossers use them.

CJaguar265 01-08-2011 01:17 AM

Quote:

Originally Posted by Formula413 (Post 35835)
Personally I think Duralast rotors are a great choice. They seem to have very good resistance to warping, based on my experience in my Escort. Price is reasonable, 2 year warranty. They seem to do pretty well in performance applications as well, even some autocrossers use them.

how is napa auto parts ? i have a dealer discount at napa

CJaguar265 01-08-2011 01:22 AM

Quote:

Originally Posted by My84Z (Post 35833)
Like i saiddo it like knight or not at all

thats is in the 1983 KITT kit


and that kind brake system is not available for sale. its in GM's expermanetal cars /alternative fuels division


can you tell what does have to do with rotors and pads for my KARR

CJaguar265 01-08-2011 01:29 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 35825)
i am on topic FOOL! im telling you just goto advance and get there wearever rotors and pads. or goto Auto Zone and get there Duralast. or any parts store and get there pads and rotors. spending the money on shit thats gunna wear out in under 30k doesnt make any sence wen it costs more and doesnt perform any better then stock replacement stuff.

thats not for and you were on topic

yuo beat my post by a min

ILuvPizzaTimes10 01-08-2011 01:44 AM

Napa will have the same offered as anyone else. Base white box rotors. or pay extra for Wagners(not worth it IMO) and agaian with the pads. cheap CHEAP, decent, and over priced. just get what is affordable for you man. thats what ive been getting at this whole time. makes almost no diff as long as you get a Decent pad. IE. has anti squeal shims and so forth.

CJaguar265 01-08-2011 02:12 AM

http://www.napaonline.com/Search/Det...47+15430+15431

http://www.napaonline.com/Search/Det...30+15431+26335

ILuvPizzaTimes10 01-08-2011 04:00 AM

yeah napa links dont work like that. i have no idea what your trying to show me!

CJaguar265 01-08-2011 08:58 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 35842)
yeah napa links dont work like that. i have no idea what your trying to show me!

front
napa part# UP 85727

rear
NAPA #NB 4885820

bottledbird68 01-08-2011 07:42 PM

Sorry pizza but I have to back alex here. The wrx has crossdrilled rotors with hawk (iirc) front pads. It's got the "race day" brakes in it the previous owner used to run at the track. They will last a lot longer and are much more aggressive in stopping power. That car will put you through the windshield if you let it. Granted we're talking huge brembo's to stock puny gm crap the point is quality pads will stop better and last longer.
We got the car with 27k on it, just rolled 100k this year and haven't touched the front brakes, ever. Still look like they have plenty of life left and trust me, neither of us drives the car easy.
And to further the point, the rears are stock parts store crap and I've replaced the rear pads twice in the time we've owned the car.
When it ever does need brakes again I'll buy the good stuff, even though it'll be a $400 brake job (got the reciept from the last one). Well worth it if you drive hard. Granted, if you just cruise around and go to shows, or focus on drag racing, parts store stuff will do fine. But, if like me, you treat every trip to work like an open track day, spend the extra.

CJaguar265 01-08-2011 11:26 PM

Quote:

Originally Posted by bottledbird68 (Post 35892)
Sorry pizza but I have to back alex here. The wrx has crossdrilled rotors with hawk (iirc) front pads. It's got the "race day" brakes in it the previous owner used to run at the track. They will last a lot longer and are much more aggressive in stopping power. That car will put you through the windshield if you let it. Granted we're talking huge brembo's to stock puny gm crap the point is quality pads will stop better and last longer.
We got the car with 27k on it, just rolled 100k this year and haven't touched the front brakes, ever. Still look like they have plenty of life left and trust me, neither of us drives the car easy.
And to further the point, the rears are stock parts store crap and I've replaced the rear pads twice in the time we've owned the car.
When it ever does need brakes again I'll buy the good stuff, even though it'll be a $400 brake job (got the reciept from the last one). Well worth it if you drive hard. Granted, if you just cruise around and go to shows, or focus on drag racing, parts store stuff will do fine. But, if like me, you treat every trip to work like an open track day, spend the extra.


what do you recommend for performence rotors and pads then ?

941LE 01-09-2011 04:57 AM

can u ever make a decision for urself? or r we gonna have to hold you hand threw every purchase u have for ur car?

CJaguar265 01-09-2011 08:34 AM

Quote:

Originally Posted by bottledbird68 (Post 35892)
Sorry pizza but I have to back alex here. The wrx has crossdrilled rotors with hawk (iirc) front pads. It's got the "race day" brakes in it the previous owner used to run at the track. They will last a lot longer and are much more aggressive in stopping power. That car will put you through the windshield if you let it. Granted we're talking huge brembo's to stock puny gm crap the point is quality pads will stop better and last longer.
We got the car with 27k on it, just rolled 100k this year and haven't touched the front brakes, ever. Still look like they have plenty of life left and trust me, neither of us drives the car easy.
And to further the point, the rears are stock parts store crap and I've replaced the rear pads twice in the time we've owned the car.
When it ever does need brakes again I'll buy the good stuff, even though it'll be a $400 brake job (got the reciept from the last one). Well worth it if you drive hard. Granted, if you just cruise around and go to shows, or focus on drag racing, parts store stuff will do fine. But, if like me, you treat every trip to work like an open track day, spend the extra.

what do you recommend for performence rotors and pads then ?

CJaguar265 01-09-2011 08:42 AM

Quote:

Originally Posted by 941LE (Post 35962)
can u ever make a decision for urself? or r we gonna have to hold you hand threw every purchase u have for ur car?

what is wrong with asking if performance brake rotors and pads are worth the money?

84ta406 01-09-2011 10:07 AM

Simple answer.. NO

Get whatever is cheap. You dont have the power to beat on it to need them and if you ever raced it factory brakes would work fine. My brakes stopped my car very easily and theyre nothing special from Advance

CJaguar265 01-09-2011 10:17 AM

Quote:

Originally Posted by 84ta406 (Post 35977)
Simple answer.. NO

Get whatever is cheap. You dont have the power to beat on it to need them and if you ever raced it factory brakes would work fine. My brakes stopped my car very easily and theyre nothing special from Advance

thanks i will go with napa for the rotors front and rear

bottledbird68 01-09-2011 10:32 AM

In all honesty I'd recommend ditching the puny factory suck bag brakes and do a c5 conversion. However, I know you don't want to lose your wheels.
So, what it really boils down to is intended usage. If you're just looking to cruise around and putt to car shows or back and forth to work then by all means whatever is cheap will work fine.
However, if you drive the car HARD, then pony up the dough. I personally can't tolerate the stock brakes on a third gen. My last 87 warped the shit out of the rotors and spanked a set of pads in under 6 months. I tossed it all in favor of a c5 front brake conversion and never looked back. Those I got crossdrilled rotors from gm performance and a I forget what brand set of ceramic pads. They held up just fine for over a year and a half of the same if not worse abuse with plenty of life left.
Course I'm not your normal putt around kind of driver either. My third gen has subframe connectors, is a hard top car, ran a stock carb'd 305/700r4, and I still managed to stress crack the sail panels. I am in no way shape or form nice to my cars and can't tolerate the weak suck factory brakes on most f bodies.
But again, for normal people, who don't treat the streets like they're running laps at Watkins glen, napa stuff will probably do. But the first time you feel REAL braking power you'll realize there is a BIG difference.

CJaguar265 01-09-2011 10:46 AM

Quote:

Originally Posted by bottledbird68 (Post 35981)
In all honesty I'd recommend ditching the puny factory suck bag brakes and do a c5 conversion. However, I know you don't want to lose your wheels.
So, what it really boils down to is intended usage. If you're just looking to cruise around and putt to car shows or back and forth to work then by all means whatever is cheap will work fine.
However, if you drive the car HARD, then pony up the dough. I personally can't tolerate the stock brakes on a third gen. My last 87 warped the shit out of the rotors and spanked a set of pads in under 6 months. I tossed it all in favor of a c5 front brake conversion and never looked back. Those I got crossdrilled rotors from gm performance and a I forget what brand set of ceramic pads. They held up just fine for over a year and a half of the same if not worse abuse with plenty of life left.
Course I'm not your normal putt around kind of driver either. My third gen has subframe connectors, is a hard top car, ran a stock carb'd 305/700r4, and I still managed to stress crack the sail panels. I am in no way shape or form nice to my cars and can't tolerate the weak suck factory brakes on most f bodies.
But again, for normal people, who don't treat the streets like they're running laps at Watkins glen, napa stuff will probably do. But the first time you feel REAL braking power you'll realize there is a BIG difference.

this is just an idea for something later in the future but, what do you think of this baer KIT and i can keep my 15 inch wheels ?

http://www.baer.com/products/complete/sport.php


http://www.baer.com/products/complet...ous-street.php

c4boom 01-09-2011 03:44 PM

ill tell you this on every thing i own except the camaro i run the duralast stuff. on the camaro I turned the duralast golds into charcoal brickets after one track day and now im putting ebcs in. but I drive way harder than you even ever could if you tried to in your car.

84ta406 01-09-2011 07:51 PM

Quote:

Originally Posted by CJaguar265 (Post 35984)
this is just an idea for something later in the future but, what do you think of this baer KIT and i can keep my 15 inch wheels ?

http://www.baer.com/products/complete/sport.php


http://www.baer.com/products/complet...ous-street.php

If you read it says it fits SOME 15" wheels. I got a feeling they wont fit yours. I had to grind my rear calipers just to fit LT1 brakes back there with 15's

bottledbird68 01-10-2011 04:58 AM

Quote:

Originally Posted by 84ta406 (Post 36045)
If you read it says it fits SOME 15" wheels. I got a feeling they wont fit yours. I had to grind my rear calipers just to fit LT1 brakes back there with 15's

That and how much does that system cost? You can do a complete c5 swap for under $500 if you know where to shop. If iirc mine was actually just under $450.
Once you're at that point just upgrade the wheels to 17's. You can find 17's in a similar style to your wheels. They're basically just a mesh pattern not bowling ball hubcap wheels like KITT. And if you're worried about resale value just save the stock parts and reinstall if need be.

Once you feel a set of REAL brakes it's tough to go back. My 87 had a stock carb'd 305 and was slow as balls but with the big brakes, zo6 wheels/wide tires, and some suspension tweaks it was a blast to drive.

CJaguar265 01-10-2011 08:17 AM

Quote:

Originally Posted by bottledbird68 (Post 36093)
That and how much does that system cost? You can do a complete c5 swap for under $500 if you know where to shop. If iirc mine was actually just under $450.
Once you're at that point just upgrade the wheels to 17's. You can find 17's in a similar style to your wheels. They're basically just a mesh pattern not bowling ball hubcap wheels like KITT. And if you're worried about resale value just save the stock parts and reinstall if need be.

Once you feel a set of REAL brakes it's tough to go back. My 87 had a stock carb'd 305 and was slow as balls but with the big brakes, zo6 wheels/wide tires, and some suspension tweaks it was a blast to drive.


it seems they change the site again. it looks I have to call them to find out how much they are and what it fits.
i am not worried about the resale value. I just like the look of the 15 inch rims

upgrading the brakes would most likely increase the value of the car

BryanH 01-11-2011 02:27 PM

How are the 3rd gen brake calipers? I know with LS1 brakes most people think they suck, when all they need to do is a little maintenance to the brake system and toss in some pads that have good street/performance stopping power.

A c5 kit is affordable compared to other big brake kits. Though even that is overkill unless you just want it for the looks. Plus, you will only stop as quick as your tires will let you. If you're on like some 300+ treadwear summer tire.. the c5 kit probably won't stop you any better than stock brakes in good condition. If you can lock up the tires as is, all you'll do is lock them up earlier with better brakes.


All times are GMT. The time now is 07:16 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.