North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   V6 Engines (http://www.northeastf-bodyassn.com/forumdisplay.php?f=38)
-   -   Turn One PS pump (http://www.northeastf-bodyassn.com/showthread.php?t=219)

SpeedingFirebird 11-03-2009 04:40 PM

Turn One PS pump
 
Turn one lists the following:

LS1 40 Series pump
LT1 40 Series pump
Aluminum 40 Series pump
Aluminum 40 Series pump w/ integral reservoir.

Anyone know which fits the 3.4?

DemonWithin99 11-03-2009 04:45 PM

LT1 should, most LT1 accessories fit the 3.4l the although not all of them will. I know the PS pump does (had to replace mine with one) actually same part number.

c4boom 11-03-2009 04:54 PM

call them up and get one of there pulleys while your at it. they keep cosmetic blems so they may have one in stock cheap that you can polish

SpeedingFirebird 11-03-2009 05:38 PM

Quote:

Originally Posted by DemonWithin99 (Post 3642)
LT1 should, most LT1 accessories fit the 3.4l the although not all of them will. I know the PS pump does (had to replace mine with one) actually same part number.

Awesome, thanks! How much was the pump? They don't list prices.

Quote:

Originally Posted by c4boom (Post 3645)
call them up and get one of there pulleys while your at it. they keep cosmetic blems so they may have one in stock cheap that you can polish

What's the benefit of their pulley?

DemonWithin99 11-03-2009 09:35 PM

don't remember the $$ but the pulley will free up resistance that most pulleys add to the motor essentially allowing the motor to turn better

c4boom 11-03-2009 11:18 PM

that and the stock one tends to blow up if you pull it a few times due to mico cracks in the pully

ILuvPizzaTimes10 11-04-2009 12:20 AM

Yeah boom boom is correct those stock pulleys arent too healthy after they spin to 6500+ rpm for a while.

SpeedingFirebird 11-04-2009 12:21 AM

Quote:

Originally Posted by DemonWithin99 (Post 3651)
don't remember the $$ but the pulley will free up resistance that most pulleys add to the motor essentially allowing the motor to turn better

I am already running Jet underdrive pulleys. I am not sure if that included a PS pulley or not. I installed those ages ago.

c4boom 11-04-2009 01:00 AM

take a look if the one on there looks like it is made of plastic its a stocker

SpeedingFirebird 11-19-2009 06:23 PM

Quote:

Originally Posted by DemonWithin99 (Post 3642)
LT1 should, most LT1 accessories fit the 3.4l the although not all of them will. I know the PS pump does (had to replace mine with one) actually same part number.

They do not carry the LT1 pump any more. :ahhhhhhh:

He does carry a pump for the 3.8. Anyone know if the 3.8 and 3.4 have the same part numbers?

ILuvPizzaTimes10 11-19-2009 10:54 PM

honestly if it fit the 3.4 wouldnt he say so? i know they are different from the 3.8 to LT1 and i believe the 3.4 uses the LT1 pump if im not mistaken.

SpeedingFirebird 11-20-2009 02:57 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 4795)
honestly if it fit the 3.4 wouldnt he say so? i know they are different from the 3.8 to LT1 and i believe the 3.4 uses the LT1 pump if im not mistaken.

He was not familiar with the 3.4. They stopped making the f**king LT1 pump. :tapfoot:

Looks like I'm going for the rebuild then.

SpeedingFirebird 12-29-2009 04:08 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 4795)
honestly if it fit the 3.4 wouldnt he say so? i know they are different from the 3.8 to LT1 and i believe the 3.4 uses the LT1 pump if im not mistaken.

The best I can tell, the LT1 uses an exterior pump and the 3.4 uses the integral pump. He told me today he cannot rebuild mine.

Any ideas on where I can get a racing pump or find someone to rebuild mine to racing specs?

ILuvPizzaTimes10 12-29-2009 05:33 AM

manual rack and pinion? no pump. youd be moving so would you really need the fluid assist. and i think with a higher turn ratio it would prevent some over steer?

black heartbeat 12-29-2009 08:30 AM

^^^ I've heard good things about Spohn's manual rack and pinion

SpeedingFirebird 12-29-2009 01:42 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 7107)
manual rack and pinion? no pump. youd be moving so would you really need the fluid assist. and i think with a higher turn ratio it would prevent some over steer?

That might be OK for the track, but I do drive the car around town a lot as well.

This car is really pissing me off. :hanged2:

ILuvPizzaTimes10 12-29-2009 04:33 PM

have you ever driven a car with a manual rack? its not the same as losing your power steering at ALL!! with the added turn ratio and design from a dead stop it feels no worse then turning a set of 45" tires on a lifted jeep with power steering is about the best comparison i can give you. you feel it dont get me wrong but its not a work out to park the damn thing either. thats one of my last steps on my car.

SpeedingFirebird 12-29-2009 06:41 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 7131)
have you ever driven a car with a manual rack? its not the same as losing your power steering at ALL!! with the added turn ratio and design from a dead stop it feels no worse then turning a set of 45" tires on a lifted jeep with power steering is about the best comparison i can give you. you feel it dont get me wrong but its not a work out to park the damn thing either. thats one of my last steps on my car.

My first couple cars had manual steering.

I'll humor you for a minute. What are the mods involved?

ILuvPizzaTimes10 12-30-2009 12:09 AM

take the power steering pump off. get a shorter belt. install manual rack in stock location. get an alignment. and your done in a weekend.


All times are GMT. The time now is 02:18 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.