North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   V6 Engines (http://www.northeastf-bodyassn.com/forumdisplay.php?f=38)
-   -   Oil pan thickness (http://www.northeastf-bodyassn.com/showthread.php?t=221)

SpeedingFirebird 11-04-2009 02:18 PM

Oil pan thickness
 
For my turbo install, I need to tap the oil pan for a return gravity feed. I was talking with the dude at Fastenal about Threadserts. If I can give him the thickness of the pan, he can hook me up with a threaded insert that should hold (hey no welding or taking the oil pan off).

Anyone know the thickness of the oil pan?

thx

84ta406 11-05-2009 12:33 AM

I would never thread into a oil pan. Theyre really not that thick. I would just pull the pan and put a bulkhead fitting or.. you can put a big dab of grease on the pan and tap the hole, the grease should get the shavings and just flush the oil out after?

c4boom 11-05-2009 12:39 AM

I think the one he has is cast and i am not a fan of taping them due to they dont have a very tough casting

84ta406 11-05-2009 12:44 AM

Forgot its a V6.. It should be thicker but even still I would pull it and do it the right way.

ILuvPizzaTimes10 11-05-2009 01:09 AM

hes not tapping the pan guys. read the post carefully, hes using an expanding insert to creat a good threaded hole without tapping or welding. BUT what hes trying to do while its a good idea it will leak. they arent liquid-tight Jay. Unless fasenal has something new i havent seen yet. just pull the pan and take it to a shop if your that worried. no offense but all this time wonder what to do you would have already had the pan off and back on by now!!!!

irockidz28 11-05-2009 03:37 AM

just drop it it isnt that bad...and you make sure its good and clean and do new filter and fluid while your at it

sciff5 11-05-2009 05:02 AM

So would you guys suggest getting an AN fitting welded on the pan?

I was thinking of drilling and tapping with the pan off the car and using something like this with a gasket

http://www.fastwayracer.com/product_...products_id=70

ILuvPizzaTimes10 11-05-2009 05:03 AM

Pull the pan off have a fitting welded to it OFF the car. and put it back on, done

SpeedingFirebird 11-05-2009 01:32 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 3750)
Pull the pan off have a fitting welded to it OFF the car. and put it back on, done

or use the hole for the oil level sensor.

Rockstar, in the PM convo you said to use a resistor to turn off the level light from the sensor. How/where does this resistor get installed? I am leaning towards this. I have the oil pressure gauge to tell me how the oil is doing, so the level sensor is redundant.

BTW, tons of people just tap the pan and be done with it. Since I race the car and put it under heavy abuse, I want something stronger.

SpeedingFirebird 11-05-2009 01:37 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 3706)
BUT what hes trying to do while its a good idea it will leak. they arent liquid-tight Jay.


stop shooting down my good ideas asshat! :asshole::D JBWeld probably won't be enough to keep it from leaking?

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 3706)
no offense but all this time wonder what to do you would have already had the pan off and back on by now!!!!

hahaha. I wish I had that kind of time bro. Some of us don't have madd skillz like you.

c4boom 11-05-2009 02:13 PM

the sensor level lets you know when your low, the presure lets you know when its so low that you are fucking your shit up. so one is sort of a phone call saying hay check your oil the other one is like swat kicking in your door in the middle of the night draging you out of your house and putting a gun to your head.

ILuvPizzaTimes10 11-06-2009 02:20 AM

Little over the top boomer. and if your not a meat head and check your god damn oil like Well your supposed to everyfill up WELL then youll be fine with out it!!! haha and just try unplugging it and using a jumper wire across the 2 terminals on the sensor pigtail. thats what i have on mine!! haha Don had put in an extra quart for me cuz the light had come on. The fuckin thing isnt even hooked up!! haha glad he was looking out for me. i felt like a douche at that point. ANYWAY do that and it will turn off that idiot light. make sure you can get sumthing to thread into that hole and then your all set. i think it an 18mm thread if im not mistaken.


All times are GMT. The time now is 02:58 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.