my car on the lift at Joe's
well we put it on the lift last night so joe can pull the trans monday. looks like one of the frictions came off the clutch.
http://a3.sphotos.ak.fbcdn.net/hphot..._7358404_n.jpg http://a8.sphotos.ak.fbcdn.net/hphot..._5775241_n.jpg http://a5.sphotos.ak.fbcdn.net/hphot..._7479316_n.jpg http://a4.sphotos.ak.fbcdn.net/hphot...8_287519_n.jpg http://a7.sphotos.ak.fbcdn.net/hphot..._7134781_n.jpg |
Nice. I def need a lift. Pulling trannys on my back sucks.
|
^ yes
|
"what happen" hahahaha
|
i think you need a sway bar like BAD! good luck with monster. hope they cover it man!!!
|
The car is about to poop on Maddie LOL
|
whats wrong with my sway bar sam told me any more than what i have will make it over steer in the twisties
|
cant have your cake and eat it too. you wanna 60 foot get a sway bar that will plant your rear tire. and i feel like my car has better stability with the 1.5" rear bar in it.
|
Hey I've 60 in the low 1.5 range with the stock rear sway bar and stock tq arm. If you get anything get the rear drag bar.
|
ehh once i fix it Ill just keep adding power to make up for the bad 60 foot till I brake 11.50 with like a 2.2 60 foot LOL
|
theres no reason you cant 60 ft with the stock rear sway bar.
|
no but a good rear sway bar can cut a tenth off. thats 2 tenths for a little over 100 bucks ill take it.
|
You're on the right track Boomer, don't give up handling for a tenth at the track.
|
Quote:
|
my car handles Better with it. all it does is make a little noise. untill you drive a car with both then come talk to me. And correct me if I'm wrong. Handling packages come with SWAY BARSĂNTI ROLL BARS to help plant the inside tire and you don't lose traction.... I'm wrong though. Your all fucking retarded.
|
:partytime:
|
Quote:
|
So based on your theorys I'm gunna put small sway bars in my car and go auto crossing more body roll is better? I'm sorry but the umi drag bar is the best suspension mod I've done. Car holds the road sooo much better then the ss sway bar I used to have in the trans am. So I guess ill just sell it because its a stupid thing to have and ill buy a v6 bar that's better? Man I wish I talked to you guys first.
|
everyone here is so butt hurt with each other lately
|
Quote:
|
its not about better Its about matching the front bar I only have the stock 32 in the front so If I go to large with the rear it will cause it to be twitchy and snappy in the rear. I talked to sam straino for about a half hour on this. I would think he has a clue on what he is talking about when it comes to handling. yes a larger bar will make it run flatter but it will also cause it to be less predictable. when I do upgrade the front I will do the rear till then it will stay matched
|
That was my understanding too, the swaybars should be matched to keep the handling balanced. If 60' times are the primary concern I think the drag bar and no front swaybar is probably the best way to go. My car doesn't need much to hook but I can always use more lateral grip, I make the Nitto 555s on the front squeal on a regular basis. :) Bigger front and rear bars may be in the future.
|
Matched isn't better depends on what courses banks turns etc either way you always go slightly larger in the rear cause you want some understeer rather then pushing through the corners. Either way you threw all that out the window with your heavier rear that has alot more rotating mass different weight etc. Might as well get a corner balance and go back to the 10 bolt for cornering.
|
drag racing or road racing, pick one.
|
Quote:
|
i was talking to everyone, you cant have both.
|
Hey pizza just curious but how much different do you think your rear bar would be with poly endlinks vs. the solids?
|
That's exactly my point. Being mad your car spun tire all day. But don't want to spring for the proper drag setup cuz you won't be able to corner the car makes no sence to me. Balance it out. Do you drag race the car more or road race it moe. If it were me and I wanted to do both id get a sick drag bar. And drop the front bar. And then wen you wanna road race get a diff setup that works best for your driving style. Just because someone sed you should or shouldn't do this(over the phone from miles away not driving your car) doesn't mean he right. Yes he has his experience. But case in point. Manifolds and catted y and joes car is running 12's. If he was a new guy signed up and sed I want my 6 speed car to run 12's wed have sold him a ton of speed parts he didn't need. Just saying.
|
Quote:
|
Quote:
Quote:
|
Quote:
That would be a cool test, using the same bar but with 2 different style endlinks |
My solids make a shit ton more noise the poly stuff i had spherical ended panhard and that was horrible. Now i just don't care lol
|
I wasn't mad that it spun I was mad that It hooked better on the street tires and such than what it has now honestly I think it has to do with the pinion angle and the fact I still was not use to the new clutch. also as joe saw I sure as hell wasnt getting the nittos hot enough. I would say I drive my car more than any one on this site so for me it is best to keep it a good driver then tune that set up to its best it can do at the track .
|
its just going to take some fine tuning, tire pressure, burnout and launch rpm. those nittos may just not be enough tire but i wouldnt lose faith in them yet. notice how after lowing the tire pressure and doing the big burnouts the car would hook, but the clutch didnt last long enough to try launching at higher rpm. its also going to be more difficult to balance between tire spin and bogging the car with the 28s and 3.73s since the tires have to be hit real hard to get anything decent for a 60 ft but you already know that.
|
My car has a hard time with 60 uless I beat the fuck out of it. I have a slight vibration at speed(65ish) pinion angle is right. Control arm angle isn't. How are yours with your housing? Mine are level with the ground with the cars full wieght. I degreed them and there like barely positive. Like +.5*. I say check all your angles make sure your hitting the tires right before changing much of anything else.
|
ya they are probably way to much I have them in the bottom or the second to last hole in the relocation brackets. I have a vibration also but it only started after i did the trans cross member with the stock torque arm then even with the adjustable it still isn't tuned in. I want to get the car on some blocks or tall jack stands level and check every thing out at some point.
|
Quote:
|
28's and 3:73's you might as well kept 3:42's and 26" tires
|
thats why hes doing 4.30s
|
Was it the same guy that said the gears and tires the same as the sway bar guys.
|
| All times are GMT. The time now is 09:03 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.