Thinking about a change.
Im think since the chassis of my car is getting old. 182k and the floors and rear sub-frames are starting to rust and rot. i want to do a 1998-up Shell with my drivetrain. Yeah this will piss off alot of people BUT find me a mint LT1 shell worth buying that isnt rotting and ill buy that instead. what do you think? fix mine and spend twice as much in the body repairs it needs or buy a 1998-2002 T/A?
|
sell yours buy sullys car?????? but really man your looking at 7k for a ls car i would look for a 97 that way you can avoid getting raped for the motor your not going to use.
|
buy the old red one that has mint paint and crap stock LT1 motor!!!
lol... |
i just dont want to be in the same boat i am now and i can get 98-99's pretty cheap even V6 cars. i found a MINT NBM V6 car in RI for 2200 bux. perfect swap candidate. i want feel like a fuckin tool bag taking out a better platform(LS1) for my Boat anchor.
|
if you willing to use a v6 car than shit go for it you will be increasing the value of the car LOL
|
yeah exactly and i dont HATE the V6/Formy nose on 98 up cars. al id do is slap a WS6 hood on it and drive it. Plus id be able to set up the LS1 computer and harness before the swap and get the EFI COnnections conversion kit. AND actually be able to pass a plug-in. another thing i need to figure out. buying a newer model year car and the sticker BS that comes with them. i cant just swap over my ECM at that point.
|
I thought you said at the meet no way to a V6 donor as there was to much to change over far as wiring, suspension, etc?
Now you sound like me.:max: |
He is pretty much going to have to change it all over anyway. Keep in mind the floor pans are a different shape in the 98+ cars, may make exhaust routing an issue too. Although it may just be the bracing, the pan might be the same, but check it out. You will also have to swap over your suspension too because the LT1 is alot heavier then the LS1 and will probably cause the nose to drop. At the very leastyou will need a spring change so a V6 car won't make much difference.
I've got a better idea, sell your stuff and get an stock 01-02 LS1, pick up a few tenths at the track to boot :p |
yeah batman NO haha im keping my LT1 shut it!!! and as far as floor pans they are the exact same except were the tranny crossmember bolts up. as far as exhaust and everything else its all the same. and i have all new suspension as far as springs go any way im not worried about that. But i was looking for a 98-up blown motor or high milage But the car HAS to be in good to great shape. i just want out of this rusted shell and into a nice car to trust building onto.
|
Find a clean running LT1 car and sell the drivetrain?
|
it will be harder to find a LT1 with good floor boards
|
I'd say if your car is as bad as you say it is even though it doesn't seem that way go for it as the ls1birds look better. however I say you have a lift at your disposal undercoat the car....
|
i say 98+ do it up mang
|
Mike you know what to do. Epic clean 98 RS in my town I've seen this thing its the most mint-tastic V6 I've seen in my life, and its pretty fuckin sexy. DROP YOUR SHIT INTO THIS AND CALL IT AN RS/SS!!!
http://boston.craigslist.org/nos/cto/1489328934.html |
Just remember if the vehicle is registered as a 96 up you WILL have to pass obd!
|
I would buy a C4 vette and put that motor in it and actually add value to the car.
Or if you just wanna go fast, LT1s fit Rx7s just as easily as ls1s |
there is NOOOO way id ever get a C4 there suspension is CRAP. a forth gen out handles them in every way possible in just stock form not to mention what you can add to them. and no offence BUT id rather not be in the same boat you are in. i just bought a 1500 dollar rear end for a reason. So i dont want be back down that road again. No RX7 for me. i dont Just want to go FAST i want a car worthy of building. BUT i may be over reacting to the actual shape of this car. it goes down the road straight and aside from a few common rot spot(rear floor pans/frame rails) i want to fix this car if its cost effective. IE costs less then buying a shell and doing a full swap over. we shall see i can see it costing over 3 grand to buy another car and all the other small shit. Hopefully. But fixing my car shouldnt cost that much and then its still "MY" car. Fuck i dunno what to do. So im gunna get a quote from a GREAT body guy soon and see if he tells me its worth the repairs.
|
Like Ron said you will also have a problem putting it in a '96 or newer roller because they need to plug it in to even get you a sticker. Fix the rust, paint it and you'll be set, and will have spent way less than any other option.
|
im not worried about the Pluggin crap. they make conversion shit to put an LS1 PCM onto the LT1. all id have to do is drop the motor in and have it tuned. But i think that may be a better route is to fix mine. lets see what the body guy sez. if its over $2000 i might not do it.
|
seriously i dont think 2k if gonna get u far with body work imo, especially if your talking paint too. if your really serious about body swapping look down south. there dirt cheep and dont have the winters that we do. you'll have to tow it back but the shell u get down there will be alot cheaper and im much better shape than up here
|
Quote:
|
You know what I say.Sell your car,buy a LS1 car and do headers/Cam and make more than you do now.
If you run a LS1 comp on your LT1 I can get it to pass the plug in. Did a 98 S10 with a LS1 swap.I can burn in the original S10 vin #. |
yeah but im not looking to get rid of my engine persay. i dunno maybe im too attached. but for the price of all that would be more then i have into mine now anyway. i think im gunna stick with my shit box untill it ripps apart at the seams. all the extra money i would spend on a roller or a 98+ would finish my car off. its not like its completely Fucked. its just not mint anymore. i dunno
|
I"ll keep any eye out for....uhh....high mileage blown late 90's f-bodies for you, i'm looking around for a v8 car anyways so I'll let you know if I see anything that you may be interested in
|
hey pizza i know what u should do. buy ls car your choice then put yr lt in my camaro that would solve all yr problems
|
Quote:
I dont know what makes you say their suspension is crap. It was known for being innovative. One of the first american cars with all forged aluminum independent suspension componets. In the 80s the c4 was considered one of the best cars out there for road racing and autox stock car classes, regularly outpacing porches and bmws of the time which today are even still considered great handling cars. Even today they are competitive. Hell a C4 vette won one of the stock autox classes at the SCCA nationals last year for the mens and womens classes. At the drag strip the manuals already have a Dana44 rear end which is good till about 1.4 60's which have been achieved in manuall shifted cars on stock suspension and they have cut better 60's on stock rear suspension with autos, I belivee down into the mid/ high 1.3s. I dont know what part of the suspension is really so terrible. Its a great all around setup which is why its prob one of the most commonly used suspensions setups on resto rods. The only problem I have is the rx7 was never offered with a kick ass rear end like the dana44 so I shouldent really launch near the limiter if I care to drive home afterwards, but I could prob hook right now a 6000rpm launch with nearly stock suspension so IRS can do more than most give it credit for at the track. You saw the rx7 yourself on the stock rear. The c4 is better at not gaining negative camber at launch and are damn near as light as an rx7. Looking back now I kinda wish I went with an C4, at least then I'de be able to race it in real street. BTW after reading the rest of what posted.. You should just sell off your LT1 stuff and get an truck block 6.0 (LQ4 or LQ9) like don said, do exhaust and a cam, and make more power while probably making money on the deal. |
dude you are replacing all the suspension pieces and you have access to a lift..... clean sand and undercoat the thing. then put a newer style nose on the thing and save your money.
|
your motor in a fiber glass 30-32 chevy 1500 pounds and able to hook like no other
|
Sciffyy poo. i dunno man ive never seen a vette in stock trim handle worth a damn. C4 suspension still used the mono leaf design wich is hardly state of the art or worth the time to screw around with. dont get me wrong for its time it was kick ass. But even wen the 4th gen came out it could handle more lateral G's in the corner stock for stock over the C4. Now a C5 That would be sumthing!!! and i Will not get rid of my LT1. everyone clains ill make more power LS blah blah blah. how much would it all cost to make 370 rwhp and over 400 rwt on an LS? really. ive already got 6 grand into this long block and 4 grand into the rest of it not including the rear end i just installed. im sorry im sticky with MY engine and rear end. And im gunna listen to John and undercoat the crap out of it IF i cant find a good deal soon. So please no offence but stop fuckin telling me to get rid of my engine for christ sake. im not trying to run 10's im trying to have a car thats gunna last and its fun to drive. i could give a fuck less how fast it really is. i built it its mine i love it.....
|
i for one have never told you to change your motor or any thing (who the hell am i to judge i modded a metro LOL)
|
370/400 in an LS1 is a stock 01-02 motor and a small cam, with the GM hot cam I made 385/387, just FYI, probably cost about $3500.00 for the whole thing
|
Mike, here is a thread on ltxtech about an LTx 99 Firebird:
http://ltxtech.com/forums/showthread.php?t=7349 |
Damnit Batman why do you guys always gotta push the LS1 engine onto us!?!?
|
it because they think they are faster for less money. wich may be the case. but i dont give a rats ass about the LS1's i have an LT1 thats far from stock and need better heads to make the power i want wich is FAR less then buying and building an LS car so STFU about the god damn LS1's already. this thread is for ME to get ideas on doing a whole car swap. NOTTTT a motor swap!! and I Love You Kevo!!!
|
are you only looking into birds and camaros or would other chassis be of interest also? what about some thing like a 2nd gen or an imp.
|
nope im set on a Trans Am. thats what i have thats what i love and thats what ill keep. haha
|
So it's settled: Address the rust, get a paint job, throw some Trickflows on it, and go hurt some LS1 owner's feelings. :drivingwheel:
|
Quote:
See the pic below? That was with my crappy driving, headers, exhaust & tune by Don & that's it. A better driver would have gotten a 12.5 out of it. Bone stock I got a 13.3 out of it. Do that with an LT1. Oh wait, I tried, & failed. http://home.comcast.net/~myws6/butch2.jpg |
i still dont see your point. my car has run a best of 12.9 at 114.41. if i wasnt scared of grenading the rear end id have put QTP's on it and run 11's i dont give a shit about the LSx for fuck sake. i have my 396 im happy with it shut up.
|
Fuck ls1's I grew up around the SBC all my childhood and its just my cup of tea I have plenty of LT1/sbc parts laying around so I stick tothe sbc because of my massive old school parts collection. stfu about ls1's we know they are a better engine than the LT1's thanks for edumacating us on that but you gotta make with what you got not seek something to fit in with the crowd. I cant wait to eat all the slow ls1's on here with my carbureated SBC :klab:
|
| All times are GMT. The time now is 09:29 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.