North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Cars-Parts F/S WTB (http://www.northeastf-bodyassn.com/forumdisplay.php?f=19)
-   -   fishing for interest.... (http://www.northeastf-bodyassn.com/showthread.php?t=423)

DemonWithin99 12-29-2009 07:04 AM

fishing for interest....
 
moser 12 bolt complete with LCA relocation brackets. off an LTx.
(any inquires will take time to answer.)

ILuvPizzaTimes10 12-29-2009 07:09 AM

JOSH!!!!!!!

CamaroRacing12 12-29-2009 07:12 AM

price? mileage? track passes? gears? with brakes? pics?

black heartbeat 12-29-2009 07:31 AM

^^^what he said

84ta406 12-29-2009 12:51 PM

x2!!!! I feel I'll break a 12 bolt and end up like John all the time though.

ILuvPizzaTimes10 12-29-2009 04:35 PM

john breaks his 12 bolt being a meat head and spraying out of the hole. for your car it would be ideal as it uses up less power then a 9" and are a little lighter as well. plus with and auto i don see you breaking one. 6 speeds a whole different animal.

DemonWithin99 12-29-2009 05:04 PM

it's brand new, never been driven (yet) already has welded in LCA brackets complete setup. not sure on gears (want to say 4.10's could be wrong) but he decided to look into a different size rear tire so instead of cutting this one up he's looking into a custom one. it's this one.
http://i279.photobucket.com/albums/k...8/DSC00186.jpg

Batman 12-29-2009 09:54 PM

Pretty much the same thing I have

84ta406 12-29-2009 10:33 PM

Price? How soon is he looking to get rid of it?

ILuvPizzaTimes10 12-30-2009 12:00 AM

id say he calls QP or Midwest and has them run a 3rd gen length rear in it. its an inch shorter per axle and 2 inches shorter over all. so he can run 6.5 backspacing(cheaper) and run 12" tires under the stock wells.

DemonWithin99 12-31-2009 09:08 AM

not sure on $$ yet but guessing 3k+ ish...

but got some info

Moser 12 bolt, ta cover, 33spline axle, true track posi, 3:42 gears(has 4:10's for the track, left these in for now), hardened yoke, 4 channel abs sensors, spohn LCA re locators, and larger brakes (if that helps any)
0 miles, freshly installed as of now, but may have a few miles on it once he's ready to pull it off.

(guessing next few months. not sure with him)

but I'll let him know he has takers (if there are any)

84ta406 12-31-2009 11:45 AM

For 3k I'm out lol

ILuvPizzaTimes10 12-31-2009 10:13 PM

3k seems a bit high there demon that rear is New from moser for like 2800 ish. just saying

DemonWithin99 12-31-2009 11:52 PM

plus all the other parts? not sure what it all cost, but you'd spend more putting it all together wouldn't you?

ILuvPizzaTimes10 01-01-2010 12:35 AM

what other stuff? the T/A girdle 125 bux LCA brackets 100 bux usually installed. 4 channel option is what another 100? i dunno 3k wether its used or new either way its not coming from Moser. id be hard pressed to see anyone pay 3k for that rear end. im just givin yah a heads up. if it were me id keep it.

DemonWithin99 01-01-2010 10:22 PM

I dunno what he spent on it honestly, just threw a # out there he has a better idea than I would so I guess I'll start over by asking for offers...?

DemonWithin99 01-23-2010 06:48 PM

I have a $$ # if your interested let me know he said around $2300.

ILuvPizzaTimes10 01-24-2010 07:10 AM

that sounds fairly priced. good luck with the sale!!! if i had seen this before the 9inch id be all over it!!

c4boom 01-24-2010 02:40 PM

I will brake it im stuck giong 9 inch or s60

84ta406 01-24-2010 02:42 PM

Thats a good price probably have a lot of luck on LS1tech?

DemonWithin99 01-24-2010 04:34 PM

well it's set up to handle a lot of power so I don't see how you think you'd break it...

yeah he finally got back to me about a $$ I'll try posting it up there.

c4boom 01-25-2010 03:54 AM

moser and strange both say that with a stick and good tires the 12 bolt will not hold up to the clutch dumps it will make noise and eventually fail. this is strait from moser.


All times are GMT. The time now is 07:41 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.