North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Racing (http://www.northeastf-bodyassn.com/forumdisplay.php?f=28)
-   -   10-11-13 (http://www.northeastf-bodyassn.com/showthread.php?t=5185)

Blue01Z 10-14-2013 12:11 PM

10-11-13
 
Took the Z friday night! Only mods done to car, Lid,bellow,ported stock TB and SLP LM1 catback.. STOCK 2:73 rear gears. Drag radials were on, 1st pass after a 3hr and 20min ride due to holiday traffic, 13.3 107.7..made 5passes total. Best ET 13.09 108.2MPH... Worst RT was on that pass, .232. Best RT was a .095 13.12 @ 107.99MPH... Cant complain one bit for the mods done to the car!

ZFreie 10-14-2013 12:20 PM

Ditch the junk gears and youll pick up quite a bit I'd say

Blue01Z 10-14-2013 12:31 PM

i know, i got a 10bolt w 4:10s going in, and its got a center section and axles, but i wanted to get a base idea of where it was. Im extremely happy for the mods, comparable ive been seeing them do 13.4-13.7 w my setup..Btw the car is an A4

My84Z 10-14-2013 01:10 PM

Nice runs! Rt means nothing btw only matters in bracket racing ET's don't don't start to you move. Car is going well gears will make a huge difference. As well as a tune.

Blue01Z 10-14-2013 01:39 PM

Thanks! Got a built 4L60 going in it with a yank 3600 converter,tranny cooler, longtubes ORY pipe, LS6 heads and LS6 cam i was just offered on a great deal, only gonna do them if they are worth the price, gonna talk to slowhawk and get a confirmation. After all that, its getting the full edit tune.. Hoping to be in the high 11's next year.

Formula413 10-14-2013 02:04 PM

Those are solid times. If you are putting in an SS3600 those 4.11 gears might be too much.

Z28 10-14-2013 02:40 PM

Those are good times dude. Congrats

ZFreie 10-14-2013 02:41 PM

You dont have a tune?!?!

Blue01Z 10-14-2013 03:01 PM

no tune!! haha all stock manifolds and cats with a cat engine light code PO430 lowbank 2..haha!

KLAB 10-14-2013 03:56 PM

autos FTW. nice times

Blue01Z 10-14-2013 04:52 PM

thanks man! wish the car was a 6spd when i bought it, now having the auto, doesnt bother me 1 bit..its fun to cruise and hell i can even let the ladies drive it if they want...ok im kidding about the last part hah!

Z28 10-14-2013 05:53 PM

I let girls try to drive my car, they gave up when they couldn't turn the steering wheel without power steering.

smokinss 10-14-2013 06:25 PM

slow. J/K buddy. Glad to see you finally made it up there. Now the fun begins and will never end. Trust me, I know....

84ta406 10-14-2013 07:12 PM

Quote:

Originally Posted by Z28 (Post 83643)
I let girls try to drive my car, they gave up when they couldn't turn the steering wheel without power steering.

No power steering?

Z28 10-14-2013 07:28 PM

Quote:

Originally Posted by 84ta406 (Post 83647)
No power steering?

I blew my pump awhile back, fixed it right before the transmission went

Blue01Z 10-14-2013 07:42 PM

haha thanks justin!!! and trust me if im 11.8-12.20 range next year, ill be happy as hell! Let the tear down begin!! she goes in saturday for the paint job!

LSX-Nation 10-14-2013 10:27 PM

Congrats. i pretty much have the same mods as you but im a m6 with 4.10's.
My best was a 13.7 with a 2.3 60' and hit the rev limiter in second. I should of left a lot harder but i figured i would like the car cool down a little bit and i went back and the track was gone.

ls6monte 10-14-2013 11:44 PM

Congrats Steve! and yes, you're still slow. lol

Blue01Z 10-15-2013 12:14 PM

haha thanks ron!! Someday ill be as fast as you!! hopefully next year lol..and your about 1000 pounds heavier then me im sure.. Hopefully i can get there haha

KLAB 10-15-2013 03:20 PM

yeah I wanted to swap mine when i first got it in 2008. after I put 3.42's in I changed my mind haha. then the converter solidified it.

Blue01Z 10-15-2013 04:13 PM

i have 3:73 gears brand new in the box but i dont wanna get this rear end and swap to 3:73s bc it will probably cost about 350-400$ to swap them..im not that mechanically inclined to do rear end gears on my own

Z28 10-15-2013 04:23 PM

Well if you mess it up you still have the other rear end to go in, no?

Blue01Z 10-15-2013 04:37 PM

yeah but i dont wanna screw up a rear end with a center section and axles for a gear swap..unless the 4:11s really hurt me

KLAB 10-16-2013 03:26 AM

center section? you talking 9" boy or what? lol

SLP IROC-Z 10-16-2013 03:59 AM

youll be out of revs with the 4.11 or very close to it

KLAB 10-16-2013 04:38 AM

dude sell everything and just get a used 3.42 complete read end. wont have to worry about anything

Blue01Z 10-16-2013 12:16 PM

i can actually get a rear end w 3:42s right now out of a buddies 97 WS6 t/a only thing is its got 200k on it, however it is mint doesnt howl or leak anything, so thats a plus..or i can swap him my stock 10 bolt w 2.73s and like 100$ he said. just dont wanna get to crazy w a 200k mile rear end

KLAB 10-16-2013 02:28 PM

well how much? I'd try to find one with lower miles. Thats a lot of cyclical loading after 200k and the axles and gears are probably quite fatigued.

Blue01Z 10-16-2013 05:44 PM

my stock rear end plus 100$ is what i was told for that rear end w 3.42s

ZFreie 10-16-2013 05:48 PM

Eh, I picked my 20k mile 3.42 gear for $150.

Mileage is only reason i would be worried about it.

84ta406 10-16-2013 09:04 PM

Quote:

Originally Posted by Blue01Z (Post 83722)
i can actually get a rear end w 3:42s right now out of a buddies 97 WS6 t/a only thing is its got 200k on it, however it is mint doesnt howl or leak anything, so thats a plus..or i can swap him my stock 10 bolt w 2.73s and like 100$ he said. just dont wanna get to crazy w a 200k mile rear end

Need to make sure if its a 3 channel or 4 channel ABS as well.

ls6monte 10-16-2013 10:37 PM

What a pos that is! Didn't even get on it leaving work this afternoon! Pussy!!!!!!


Yes I saw you!



Loser!!!!!!!

Blue01Z 10-17-2013 12:06 PM

hahahah!! Ron i dont beat on her on the street too much, i honestly enjoy just cruising it around. I cant afford the tickets!! haha i just hit 7yrs clean driving my insurance got cut in half.


All times are GMT. The time now is 03:09 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.