Nitrous kit and all sorts of third/fourth gen stuff
 

Ok, doing a late spring cleaning and selling off a bunch of things I'm not going to need anymore.

For starters, NOS 2 stage cheater system. It's new in box, just been sitting for a few years. Bought it for the 68 and never used it. Now I'm going turbo so there's no point in me keeping it. Over the years I used the carb base gaskets and one of the solenoid fittings. Both cheap and easy to replace. Otherwise the rest is still all sealed up.
Link: http://www.summitracing.com/parts/NOS-02201NOS/

Over $660 new, asking $525

Also, I have a 92 firebird sitting here. It's pretty plucked but if there's anything random you may need let me know. Had a black interior, some of which wound up in my 87. Motor/trans already gone. Has older front bumper but the rest of the aero gfx are there. Shell is ROTTED!!!! so don't ask for the chassis if you hope to male a car out of it, I'm very optimistic and even I say it's junk lol.
Pics:
http://i641.photobucket.com/albums/u...92partscar.jpg

http://i641.photobucket.com/albums/u...rtscarrear.jpg

Basically just ask what you are looking for and I'll let you know what I have. I have a complete grey interior and lots of other bits and pieces of black interior.

I also have 2 sets of 3rd gen 16" formula wheels. One set is concave, the other is convex. All have tires, none are good enough for inspection but all hold air. Wheels aren't perfect, they have nicks chips and scratches but would be fine for a driver.
Asking $150 for a set of four.

That's all I can think of for now. Anything else I can think of I'll post it up.

I also have a few random b-body 93-96 9c1 car parts floating around.
As well as a bunch of other random odds and ends in my storage unit. I guess ask and see what I have lol.

Also parting this:97 camaro rs.
I already pulled the interior, taillights/harness, and am keeping the front/rear bumpers and front fenders.
Whole rest of car is available. 3.8 v6, automatic, t-top car. Has 270k on it but ran/drove like 70k. Currently not running, something electrical took a crap and I didn't bother to figure it out, just started stripping it.
Also have complete tan interior out of my 95 z28. Driver seat is beat, tossed the rug, and plastics aren't perfect but I may have some odds and ends you need. Ask away. BO on everything.

And before you ask, car looks good from the outside but rear rails are rotted and there's a fist sized hole where the pass rear subframe connects to floor so I wouldn't bother to save the shell but won't hesitate to cut it up.

Here's a couple pics before I started stripping it, can get current ones of whatever you may need:
http://www.newengland-motorsports.co...1&d=1246473396
http://www.newengland-motorsports.co...1&d=1246473416

Is the interior for sale or are you keeping it? Sorry I can't tell by the way you worded the post. It looks like red/grey 2 tone, which is sexy. and is that a friggen tow hitch I'd like some more info on that I could mount a bike rack on my car!!! lolol.

the way he worded it sounds like hes keepin the interior.

Yes, the interior is the grey w red insert 30th anniversary in the headrests interior, and it is in mint shape.
It's also in my 95 now, seats, plastics, door panels, dash and all. It was the main reason I bought the 97 lol. Sorry.

As for the tow hitch sure, it's available :)
It's just the bolt on ball style, not a reciever hitch though. If you're interested let me know.

aww nevermind i want a reciever to carry a bike rack but not anymore because i have a center mount exhaust! :D

Just cleared out my storage unit and now my spare room is overflowing with car parts bump lol.


Thank god my girl is car friendly. Then again, she can't say much, our dining room is half full of an 05 sti interior lol.

well the only thing I need is a non cracked non bubbled black sail panel LOL

Do you have a junk 3rd gen engine harness? Doesn't matter what engine, I'm going to cut it up.

Having done the sail panel change, you will never get it off intact. Just get a new one.

are you selling the ground effects / spoiler?

You give me nitrous kit, I pay later? lol

I'll have to double check and see what's left of the harness in the white car. How much of it are you looking for?

Pretty much what he said. Besides that mine is silver

The third gen or the fourth gen?
Either way, yes I am lol.

Hmm, I may be able to be convinced to trade ya for the 9" lol.

Fourth gen lol, and how much did you want?

How's $200 for everthing sound?
That's the 2 side and rear gfx parts (pass side has small tear in rear corner, easily repairable. Rest are good) and all three pieces of the rear spoiler. I'll even include the whole spoiler off the hatch, not just the rs part, so you don't have to worry about drilling into your stocker.

sounds great, but please dont hold off for me, sell by all means if someone else comes along, just have to see if its feasible to get them right now, but thanks a lot either way!

Sorry need the 9" too much! lol

For the wiring harness, I def need the C100 connector (bolts to the firewall on drivers side). I also will use the C207 (at ECM) and brake booster connector if you have those, but if not no biggie.