North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LSX Powertrain (http://www.northeastf-bodyassn.com/forumdisplay.php?f=37)
-   -   Intake ideas? MAF Questions too. (again) (http://www.northeastf-bodyassn.com/showthread.php?t=2245)

Bayer-Z28 01-20-2011 11:51 PM

Intake ideas? MAF Questions too. (again)
 
It's down to the FAST and Vic Jr now.

Also, what MAF should I run? (Don) From a tuning stand point. I've heard you can go TOO big. If I'm running a 102 TB would a 100mm blade MAF be ok? I would think an 85mm MAF would be a restriction on a 102TB.

Anyway.. I was told a Vic Jr is wrong for my cam. Someone mentioned that it performs better with wide overlap cams. Mine only has 5* of overlap. Can I get a 95 or 92mm 120* elbow for the Vic Jr to clear the stock SS hood?

My84Z 01-21-2011 12:46 AM

Victor jr will make less down low but more up high where as the fast will make more mid but less peak and at top.

Batman 01-21-2011 01:40 AM

and stock cubes a Vic JR will kill you. Same with a FAST 102, there have been alot of complaints about them. I'd go with a Fast 92/92 and an 85MM Z06 MAF. But DEF I don't think you have anywhere near the cubes to pull off a Vic JR or a 102.

Slowhawk 01-21-2011 03:54 PM

I all comes down to the head and cam selection.No wide splits with victor junior intakes. LSA is best at 106-110.

Just did a 01 Z that made 445hp/400tq on my dyno with TFS 215 heads,230 cam,LS6 intake,ported TB,stock MAF, ARH headers and 12 bolt with 4.11 gears. Compare that to your #'s or even Batmans car on my dyno.( I think was 380hp or so).

941LE 01-21-2011 04:04 PM

393/366 were the dumbers Don. Gonna be seeing u when i get home

Batman 01-21-2011 07:58 PM

Quote:

Originally Posted by 941LE (Post 37086)
393/366 were the dumbers Don. Gonna be seeing u when i get home

Needs to be tuned too....

941LE 01-21-2011 08:00 PM

lol its what its for Nick

ILuvPizzaTimes10 01-21-2011 10:05 PM

Quote:

Originally Posted by Batman (Post 37099)
Needs to be tuned too....


needs more then tune.

Batman 01-21-2011 10:21 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 37108)
needs more then tune.

it NEEDS a tune to run correctly the way it is, after that it's up to him what to do with it. But at least it's running...:p

c4boom 01-22-2011 04:29 AM

mikes car runs we started it at the party :P


All times are GMT. The time now is 10:04 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.