Parting Out Drag Car Project
 

Parting out my 1995 z28 Drag Car Project. Decided to keep the shell with the intentions of building the car some day down the road. All parts listed are brand new. They were mounted on the car, but never driven on.
_________________________________
Wolfe Racecraft Cromoly Lowers
http://www.wolferacecraft.com/detail.aspx?ID=219

These control arms also come with a set of offset bushings for added tire clearance. After I ordered the arms, I called Wolfe and purchased the bushings which were an additional 56.00 shipped, so the arms come with both standard and offset bushings. They were mounted to make the car roll and that was it.

http://i128.photobucket.com/albums/p...0425-00768.jpg
http://i128.photobucket.com/albums/p...0406-00719.jpg

210.00 with both set of bushings
__________________________
LS1 Spindles and Brakes

Includes LS1 Spindles that have been sandblasted and painted VHT chassis black. Caliper brackets, Calipers, Good Pads, and Cut Rotors also included.

http://i128.photobucket.com/albums/p...0405-00702.jpg
http://i128.photobucket.com/albums/p...0405-00701.jpg

125.00 Complete
________________________________
Aeromotive A1000 Pump (used)

This pump is a few years old and runs great. In pretty good cosmetic shape as well.

http://i128.photobucket.com/albums/p...0409-00723.jpg

200.00
__________________________
Spohn Solid Motor Mounts

Solid tubular motor mount stands from Spohn for 98-02 k-frames. Never had the motor mounted to them. Includes hardware for frame side.

http://i128.photobucket.com/albums/p...0121-00486.jpg

100.00
______________________
16" zr1 Replica Wheels

This is a set of silver zr1 replicas. The wheels are 16x8 and are in excellent condition. There is no curb rash, and all the wheels are straight, however there are a few little scratches and I am missing one center cap. There are tires installed, but they don't have much life left.

http://i128.photobucket.com/albums/p...1212-00281.jpg

275.00 for the full set
_________________________
B&M Pro Ratchet Shifter
http://www.jegs.com/i/B%26M/130/80840/10002/-1?CT=999

Shifter is in good shape. Comes with 5ft cable and most of the brackets, but you will need to purchase the arm that attaches to the actual trans.

http://i128.photobucket.com/albums/p...0102-00380.jpg

125.00
_______________________
Eibach Pro Kit REAR Coils

This is for a REAR set only of Eibach Pro Kit springs (roughly 1" drop). Again, this is for the REAR only, no fronts included.

http://i128.photobucket.com/albums/p...0420-00754.jpg

50.00
_____________________________________
Strange Front Single Adjustable Coilovers

Sale Pending

http://i128.photobucket.com/albums/p...8/SAM_0137.jpg
http://i128.photobucket.com/albums/p...0306-00590.jpg

Sale Pending
______________________________________
Affco Double Adjustable Rear Coilovers

Sale Pending

http://i128.photobucket.com/albums/p...8/IMG_2693.jpg
http://i128.photobucket.com/albums/p...0403-00697.jpg

Sale Pending

HUH?!?!?!?

where are u located exactly? im interested

Springfield ma

Sale Pending on the Affcos

Added Spohn solid motor mounts

just an irrevelant question but what did you use to paint the spindles and brakes they look real good.

VHT Chassis Paint on the spindles and caliper brackets.
Dupont Caliper paint

nice.

wtf

Sale pending on both sets of coilovers.