5.3 vortec wiring harness, pcm and coils
 

anybody need a harness and pcm for a swap? I have one, complete uncut harness from a 5.3 truck and coils with brackets...

250.00

http://i128.photobucket.com/albums/p...s/SAM_0470.jpg
http://i128.photobucket.com/albums/p...s/SAM_0471.jpg

year make and model it came out of. will better help someone who may want to get. as you can use the truck harness to convert an M6 car to Auto with some work.

bump

The ecu I have is Serv#12582605

I believe the harness is a 2003
It came off a drive by wire engine.

2wd harness, not 4wd.

Good deal right there.

Thanks Don, thought I was crazy that nobody has jumped on this yet.

someone by this and start a damn ls swap already! haha

Reason I haven't yet is the dbw

you are going to have to modify the harness and tune the pcm for your chassis anyways...so why not just remove the pins for the dbw? I think its only like 3...

...i dunno if this fix would apply? http://www.lt1swap.com/cable_conversion.htm
probably have to get in touch with the guy to see if my pcm service number would work?

or check with don

aaaaaaaaaand vice versa? :D

:klab: