North East F-Body Association - ok finally figured out whqat happened to my motor

Page 1 of 2

Show 40 post(s) from this thread on one page

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)

- Pictures/Videos (http://www.northeastf-bodyassn.com/forumdisplay.php?f=12)

- - ok finally figured out whqat happened to my motor (http://www.northeastf-bodyassn.com/showthread.php?t=4093)

DAWG	04-28-2012 08:18 PM

ok finally figured out whqat happened to my motor

head gasket!
check out the head gasket between 3 and 5
http://i859.photobucket.com/albums/a...0/IMG_0144.jpg
http://i859.photobucket.com/albums/a...0/IMG_0145.jpg
there is a bit of a crater im hoping the machine shop can fix it!

holokosta

04-28-2012 08:21 PM

Wow crazy. I'm sure they'll be able too

DavidS

04-28-2012 08:23 PM

Quote:

Originally Posted by DAWG (Post 67608)

there is a bit of a crater im hoping the machine shop can fix it!

Dawg, What machine shop? Are you bringing it back to Billy The Kid?

black heartbeat

04-28-2012 10:17 PM

great excuse to mill the heads and up the compression

frankzlt1

04-28-2012 10:20 PM

Wow you must have been running all last year like that?

DAWG	04-29-2012 12:17 AM

nope just 12 miles then back home.
going to billy if he can do it or soltis speed .

DAWG	04-29-2012 12:25 AM

at least not a bad as these brodix heads lol
<iframe width="420" height="315" src="http://www.youtube.com/embed/JBkgJNEStxo" frameborder="0" allowfullscreen></iframe>

ILuvPizzaTimes10

04-29-2012 12:46 AM

they can be welded then re surfaced. But at what cost Vs. an off the shelf ported heads from AFR or Trick Flow.

ZFreie

04-29-2012 02:19 AM

That video was crazy, its amazing how they can take junk and make it gold again.

DAWG	05-09-2012 01:03 PM

heads are back on and compression in both cylinders is 195 now!
they were at 40 psi before.
woohoo!

All times are GMT. The time now is 05:38 PM.

Page 1 of 2

Show 40 post(s) from this thread on one page