North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   question about 4th gen parking ligts (http://www.northeastf-bodyassn.com/showthread.php?t=4446)

70chevrolet 08-19-2012 02:23 PM

question about 4th gen parking ligts
 
2002 formula. When the vehicle is on, the front parking lights are on at all times. these are the two yellow lights down the bottom of the front nose next to the fog lights. They are the front ones that double as directional. The bulbs are dual element. My question is, shouldn't they come on when the headlight switch is turned to parking lights? or is this a 4th gen thing? or are my bulbs in backwards? or am I just a twat waffle? :stupid: I tried a search with no avail. FYI my headlight gears have been replaced and it is not related to that.

thanks.

Formula413 08-19-2012 03:21 PM

I think you are referring to the daytime running lights. The blinker filaments are lit when the car is running and the lights are off. When you set the lights to parking lights or headlights they will be off. You can disable them if you want so you don't burn out bulbs and melt sockets.

http://xse.com/leres/ss/drl.html

70chevrolet 08-19-2012 04:12 PM

Yes and yes! Pure genius my fine featherd friend! I may nominate your for the Nobel prize. Vroom!

KB93z28 08-19-2012 04:41 PM

Hahahaha, you said twat waffle lol

ILuvPizzaTimes10 08-19-2012 06:15 PM

i just unplug the module. only thing thats really effected is the BRAKE light wont come on the dash wen you have the ebrake on. BUT in a 6 speed the hatch button wont work. A4 it will work fine.

70chevrolet 08-20-2012 01:15 AM

Anyone know if I can just use a jumper from wire a to wire b without opening up the DRL module? I don't think I got the skills to solder the circuit board.

ILuvPizzaTimes10 08-20-2012 01:49 AM

Jumping it without out disconecting it internally won't eliminate the problem. Would need to cut and connect the wires bypassing the drl module. Behind the radio there is limited room but it can be done.

70chevrolet 08-20-2012 03:47 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 72609)
Jumping it without out disconecting it internally won't eliminate the problem. Would need to cut and connect the wires bypassing the drl module. Behind the radio there is limited room but it can be done.

Roger that!
Thanks.

SLP IROC-Z 08-20-2012 06:31 PM

my DRL module is soldered at a & b, drls disabled. everything else works, brake light included.


All times are GMT. The time now is 03:17 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.