North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Cars-Parts F/S WTB (http://www.northeastf-bodyassn.com/forumdisplay.php?f=19)
-   -   F/S R.I.:02 Pewter Z28 35th (http://www.northeastf-bodyassn.com/showthread.php?t=4809)

Scoobysnacks 03-06-2013 05:12 PM

F/S R.I.:02 Pewter Z28 35th
 
I am not parting out so please dont ask. Here is what I got 2002 Pewter z28 6spd 85k miles. I bought it with 68k on it bone stock, never modded from an older gentleman. It is CLEAN! It has a couple small dings but its expected being almost 10 years old and a daily.

The McLeod and the Head/Cam setup were both done less than 2 months ago and have less than 1k miles since installed. Just did new drilled/slotted rotors with ceramic pads from Breakmotive. I have all the receipts from the heads/cam and clutch work all done by Don at Slowhawk.



I am looking for $10,000 with all mods.
SERIOUS INQUIRIES ONLY PLEASE. NO TIRE KICKERS OR JOY RIDERS


Send me a pm if you are interested.

Here is what it has:
LS1 w/6spd
MGW SS with Classic Hurst Shift knob
McLeod RXT Twin Disk
Comp 228/232 .588/ .590 112LSA (plus all supporting mods, long list)
Stock 243 Heads with Dual Valve Springs
Strange S60 rear with 4.10 gears, has the Strange LSD Diff
SLP lid
MSD plug wires
Hooker Stainless 1 3/4 headers
SLP dual dual
BMR Subframe connectors
BMR Lower Control Arms
BMR Panhard Rod
Prothane Engine mounts
SJM Line Lock
Tuned by Slowhawk

Car put down with exhaust and tune 324whp / 337wtq on a Mustang Dyno w/s60 and 4.10 gears
Post Cam 386/366 on same dyno


I have 2 spare stock wheels with street tires mounted that will go with car as well. I bought for drag radials or ET Streets but never did it. I also have to stock cats and y-pipe.


http://i63.photobucket.com/albums/h1...L/Outside3.jpg

http://i63.photobucket.com/albums/h1...L/Outside2.jpg

http://i63.photobucket.com/albums/h1...L/Outside1.jpg

http://i63.photobucket.com/albums/h1...L/Outside4.jpg

http://i63.photobucket.com/albums/h1.../EngineBay.jpg

http://i63.photobucket.com/albums/h1...id-L/Trunk.jpg

http://i63.photobucket.com/albums/h1...-L/Inside1.jpg

http://i63.photobucket.com/albums/h1...-L/Inside2.jpg

http://i63.photobucket.com/albums/h1...nsideRear1.jpg

http://i63.photobucket.com/albums/h1...nsideRear2.jpg

http://i63.photobucket.com/albums/h1...L/Linelock.jpg

http://i63.photobucket.com/albums/h1...L/Strange1.jpg

http://i63.photobucket.com/albums/h1...L/strange4.jpg

http://i63.photobucket.com/albums/h1...L/Strange8.jpg

941LE 03-06-2013 07:14 PM

im shocked it hasnt sold yet

Formula413 03-06-2013 11:09 PM

Clean car. Why are you selling it? You should sell that SLP Dual/Dual separately, I bet someone would scoop that right up.

Scoobysnacks 03-07-2013 12:37 PM

Quote:

Originally Posted by 941LE (Post 78346)
im shocked it hasnt sold yet

So am I lol

Scoobysnacks 03-07-2013 12:43 PM

Quote:

Originally Posted by Formula413 (Post 78352)
Clean car. Why are you selling it? You should sell that SLP Dual/Dual separately, I bet someone would scoop that right up.

I have no need for the car. The typical thiing of modding cars for the track and never go. I did the same thing with my WRX and sold that too. I bought a house back in April and now have a commute to work so I never drive it but once every two weeks.

The Dual Dual I am probably getting put on in the next week or so. The cramped dual setup that is on there now hits a couple places which when contact it vibrates the car which I find annoying and might deter a buyer. I want it perfect for the buyer.

Slowhawk 03-07-2013 02:09 PM

Car has an easy $8k in mods. Pretty sweet deal.

Scoobysnacks 03-18-2013 11:09 AM

Monday bump

Scoobysnacks 03-25-2013 03:50 PM

Bumpity

Slowhawk 03-25-2013 07:22 PM

I'm surprised you still have it.

Scoobysnacks 03-26-2013 04:43 PM

^same here lol.


tuesday bump


All times are GMT. The time now is 05:07 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.