Wolfe anti-roll bar installed
 

Finally got my Wolfe anti-roll bar welded in. Came out really nice and I could already tell a difference in the way the car leaves on the street. No more body roll in the back and a much more solid feel.

http://i56.photobucket.com/albums/g1...psd1bead0f.jpg

http://i56.photobucket.com/albums/g1...ps30022460.jpg

Nice addition to the car.That looks brutally stiff but I guess that's what you want for drag racing.

Nice! Im interested to see how to helps your 60s.

Me too. How does it feel in corners too.

It drives good but its not intended for cornering hard. Its so stiff that I have heard the back end can come around on ya on a sharp turn if you are going fast.

After getting the car on the ground it appears that we need to re weld the tabs a little higher up on the frame.

Yeah I would recommend not pushing it on corners it might be the end of your car.

Got the tabs welded up higher on the frame. Bar is where it needs to be now.

http://i56.photobucket.com/albums/g1...ps9cfbcc4c.jpg

Much better now.

looks better but still a little low though?

Yeah that's the down side to this setup. But in all reality the bar is only about an inch or so from the bottom of my 9 inch housing. I don't for see it hitting anything.