well boost is less stress on the crank then n2o..from all the shit ive seen people do and such rule of thumb i go by is 100hp..so you can do 800hp on juice and then 900 on boost..boost is less violant on the parts.it dont shock the parts as bad.
No for power wise a bw s400 75mm turbo would make for a nice piece..with race cover there good for 950-1000hp maxed out.So you figure with 10-14 your in the solid 500-600hp range..At this point i would def just have a cam speced out for me..Its nicer to have one speced for your app..You could get a cam that might want to spin to 7200k even though it says the rpm range is peak of 6500rpms.
As for stock crank ive not heard anyone break one yet..but im new to the lt1 world but have looked threw alot of post and know they can take some shit..i think around 800-1000 hp the crank flex is really the killer at that level an its just better to ditch it and be able to turn her up if you want to with out thinking i have a bomb on my hands maybe.
your 355ci or so right,i would go with a 2.5 cross overs for the hot side,you can use the 3rd gen ebay turbo headers and mod them some to work..headers are 190$..they are not the shorty twin turbo ones but the long ones. cut the ends off an to your hot side out of a cheap tail pipe exh kit..then send the headers an hot side for coating.
You can get a kit with a 75 s400mm turbo with waste gate and blow off for around 1100$..so now your about 1800$ into the hot side,cold,headers and turbo.intercooler is up to you.you can just run meth injection..which -20 windshield washer fluid is cheap.
__________________
box of ls6 junk an some dope..i wish i new what i was doing
|